E Core Technology HP5139N Users Manual

RF2.4G PSII WIRELESS CONTROLLER（HP5139）

E-CORE TECHNOLOGY (CHINA) CO., LTD

USER MANUAL

IMPORTANT INFORMATION REQUIRED BY THE FCC

THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV

INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO

THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S

AUTHORITY TO OPERATE THE EQUIPMENT.

Thanks for select our RF 2.4G PSII controller! For play more

conviently and correctly, please read the manual carefully before
playing.

Product brief Introduction

HP5139 wireless controller adopt 2.4GHz RF technology, with
steady connection capacity, far distance, low function wastage; beautiful
outlook, good handle , make you feel be personlly on the scene!

Technology Specification

1. Compatible with PSX、PS1and PSII game console

2. Two selection model（ANALOG、DIGITAL）

3. Support TURBO function

4. Signal connect indicate

5. Auto/un-unto connection

6. Fixup ID code defending fault fucntion

7. Power deplete low, low voltage indicate

8. Auto sleep saving electricity function

9. 12 buttons and 256 level simulate funciton

10. Grip with soft plastic to prevent slipping

11. Availability distance≥10M

12. Work voltage：6V 4×1.5V AAA battery

13. Work current：work current 6.5mA sleep status:15μA

14. Size：controller 155*110*75mm；receiver 80×50×20mm

15. Weight：156g

Prodcut Introduciton

Use Introduction

1. Product function introduction as following picture:

Controller function sketch map

Receiver function sketch map

5）. When connection is ok, no work for 5 minutes，enter

1）. Open battery cover，put in 4pcs 1.5V AAA battery as

battery box polarity indication, then close it.

2）. Connect PSII console to TV, put in the game dish,

insert receiver.

3）. Draw the switch in controller (HP5139) front to “ON”

switch on，POWER LED bright，then switch on the
game console,”CONNECT” in receiver bright ；
If ”CONNECT” trun from winking to lasting,
connection for controller and receiver is ok, play is
ok；If “CONNECT” continue winking，show that
connection of controller and receiver is off.

4 ） .Press”CONNECT” ， winking speed fast, then

press”CONNECT” in controller，until “CONNECT” in
receiver continue bright, conncetion of controller and
receiver is ok.

to auto sleep model. Press ”CONNECT” in controller
for 3 seconds awake , POWER LED is on , get
right.

6）. When battery in low, POWER LED continue winking

remind of changing battery.

7）. Press any function button, then press”TURBO” to set

this button with TUTBO function；Press this button by
setting, then press”TURBO” to cancel TURBO
function；press”TURBO”, then press”STAR T” select the
speed of TURBO, total 4 speed for selection, press
once for changing one speed.

8 ） .When controller beyond the receive distance,

the”CONNECT” in receiver continue winking, then
controller in this status without function or fucntion is
abnormal

9）.When connection of controller and receiver finish, then

play need notconnect by person, auto connect as