E Core Technology HL2750 User Manual

Product Overview

In order to make sure you get the best possible results from your new Speaker Mojo II, please thoroughly read and carefully follow all instructions in this User’s Manual or on the product. Keep this User’s Manual in a convenient location for future reference.

Package Contents:

Speaker Mojo II x 1 Power cradle x 1 Power adapter x 1 Micro USB charging cable x 1 Aux cable x 1 User’s Manual x 1

If any of the above contents were missing or damaged, please visit bemwireless.com/support/ to obtain a replacement. Please do not return to Club, please call 855-839-8616 if you have any questions or issues with the Speaker Mojo II.

Compatibility

All devices enabled with Bluetooth technology, including iPhones, iPads, iPods, smartphones, laptops, tablets and more.

Also compatible with any device that has a standard 3.5mm earphone jack such as MP3 players, PSP, mobile phones, etc.

Meet the Speaker Mojo II

Before learning about your Speaker Mojo II, take a moment to look it over and familiarize yourself with its features.

MPORTANT : S ELECT S PEAKER MODE PRI OR TO TURN ING ON S PEAKER ( S)

Product Interface

Important: Select Speaker mode prIor to turnIng on Speaker(S)

L R

Speaker Mojo II

1. Microphone

2. Volume +

3. Volume –

4. Play / Pause /Speakerphone

5. Power Cradle

6. On/ Off switch

7. Bluetooth

8. Aux in

9. Micro USB power port

10. Power indicator

Power Cradle

11. USB port

12. Power Indicator

13. Charging switch

14. Micro USB power port

Stereo Function

15. Stereo (L, M, R) Switch

indicator

Charging Modes

Important: Select Speaker mode prIor to turnIng on Speaker(S)

1. Direct Speaker Charge

Connect the standard USB end of the supplied USB cable to a USB power source (PC, USB power adapter…etc.). Connect the Micro USB jack to the USB charging port on the Speaker Mojo II. It will take about 2 hours to fully charge the Speaker Mojo II alone.

Charging Indicator Light Modes

Power indicator on Speaker Mojo II

• Red LED: Speaker Mojo II is charging;

• No LED: Battery is fully charged

• Note: When the battery is low, you will hear a tone signaling you to charge the unit soon

2. Power Cradle Charge

The Power cradle is a backup battery pack for Speaker Mojo II and your Bluetooth device. Connect the standard USB end of the supplied USB cable to a USB power source (PC, USB power adapter…etc.). Connect the Micro USB jack to the USB charging port on the power cradle. The charging indicator will light up while charging. It will take about 3 hours to fully charge the power cradle.

Charging Modes (Cont.)

Important: Select Speaker mode prIor to turnIng on Speaker(S)

Indicator on power cradle

• Red LED : Charging, it will go off when it is fully charged;

• Blue LED : power output is on.

3. Wireless Conductive Charging via Power Cradle

Connect the standard USB end of the supplied USB cable to a USB power source (PC, USB power adapter… etc.). Connect the Micro USB jack to the USB charging port on the power cradle. The charging indicator will light up while charging. If you put Speaker Mojo II onto the power cradle, it will charge them both at the same time whether you connect the power to the Speaker Mojo II or power cradle. It will take about 5 hours for charging them at the same time. Once both are fully charged, the battery life of the Speaker Mojo II can be doubled. This can be done by turning on the power cradle, placing the Speaker Mojo II on the cradle and turning it on while playing music.

Please note, the Speaker Mojo II LED charging indicator will not light up when the speaker is charging on the Power Cradle

Charging Modes (Cont.)

Important: Select Speaker mode prIor to turnIng on Speaker(S)

4. Charging Other USB Enabled Devices via Power Cradle

The included Power Cradle can also be used to charge other USB enabled devices. Simply follow the steps listed in number 2 to charge up the Power Cradle. You can now take the power cradle with you on the go to charge various other smart devices via USB. You can do so by connecting the standard USB end of a USB cable to the USB port in the back of the Power Cradle. Then plug the other end into your smart device.

Slide the power switch to “on” to turn it on and begin charging other smart devices. The blue indicator light will light up to signify the unit is on.Slide the power switch to “off” to turn off the power cradle. The blue indicator light will go out and your smart devices will no longer charge via USB.

Play Modes

Speaker Selection (Mode)

Important: Before you go to turn on the Speaker Mojo II please stop and read these instructions carefully.

The Speaker Mojo II can be played in a couple of different ways. Mono mode will allow you to work with just one speaker or stereo mode which allows you to pair up two speakers.

Play Modes (Cont.)

L R

Important: Select Speaker mode prIor to turnIng on Speaker(S)

Playing in Mono Mode: Make sure the switch on the bottom of the speaker is switched to “M” before turning on the speaker

Playing in Stereo Mode: One speaker must be switched to “L” on the bottom and the other must be switched to “R” before turning them on.

Power on / Power off

Slide the power switch to “on” to turn on the Speaker Mojo II. The Bluetooth indicator will light up blue to signify the unit is on and

ready to be paired. Slide the power switch to “off” to turn off the unit

and the Bluetooth indicator light will go out.

L R

+ 14 hidden pages