E Core Technology HL2536 Users Manual

R

Product Overview

Thank you for purchasing the be¯m wireless Party Block. Our
speaker will bring you a new found freedom from wires while
delivering an incredible sound. The Party Block is compatible with
all devices enabled with Bluetooth© technology... which is currently
a lot of devices!

Make sure to read through the following directions, fully charge
your device and perform the initial Bluetooth© syncing process and
you should be up and running in no time. If you have any problems
stop on by bemwireless.com for the answers to all your questions.

Package contents:

Sender x 1
Satellite Speaker x 1
Power adapter x 2
Aux cable x 1
User’s Manual x 1

If any of these were missing or damaged, please visit

bemwirelesss.com to obtain replacement.

Compatibility

All devices enabled with Bluetooth technology, including iPhones,
iPads, iPods, smartphones, laptops, tablets and more.

Also compatible with any device that has a standard 3.5mm
earphone jack such as MP3 players, PSP, mobile phones, etc.

2

Meet the Party Block

Before learning your Party Block, take a moment to look it over
and familiarize yourself with its features.

Product Interface: The Sender

usb charge

aux in

dc in

5 6 7 8

1. Bluetooth Indicator

2. Power/ Pair

3. Connection Indicator

4

4. Cradle

5. USB Charging Port

6. DC In

1 2 3

7. Aux In

8. Power Indicator

3

Product Interface: Satellite Speaker

9

1 2 3 4 5 6 7 8

1. Connection Indicator

2. Power/Pair

3. Light On/Off

4. Light Mode

5. Music Sensor On/Off

6. Volume -

7. Volume +

4

11

8. Power Indicator

9. Handle

10. LED Lights

11. Rubber Cap

12. DC In

10

12

Getting Started

We know you are excited to experience your new Party Block.
These two easy steps will get you up and running quickly.

Step 1: Power It

• Connect your Party Block to an outlet using the included
5V,2A power adapter. It will start charging the Sender. The
power indicator will slowly flash during charging and goes out
when it has reached a complete charge (Approx. 3.5 hours).

• Connect the Satellite Speaker to an outlet using the included
12V,2A power adapter. The power indicator on speaker
will slowly flash during charging and goes out when it has
reached a complete charge (Approx. 4 hours).

Step 2: Connect it

There are two options for connecting to your Party Block —
wirelessly by Bluetooth© or wired using the included aux cable.

Connect Wirelessly

Turn on the power of the Sender followed by powering on each
of the 2 satellite speakers. Once the base is powered on the

©

Bluetooth

is currently in paring mode will sound.

Go to the Bluetooth© settings on your mobile phone, tablet or

computer to nd the device named “Party Block”. A tone will
sound to conrm the device has paired successfully.

indicator will light and a tone conrming that the unit

5