E Core Technology HL2002A User Manual

UserGuide_SpeakerTrio_Final2.indd 1 10/24/12 4:33 PM

speaker trio

UserGuide_SpeakerTrio_Final2.indd 2 10/24/12 4:33 PM

Product Overview

Thank you for purchasing the be¯m wireless Speaker Trio. Our
speaker will bring you a new found freedom from wires while
delivering an incredible sound. The Speaker Trio is compatible with
all devices enabled with Bluetooth© technology... which is currently
a lot of devices!

Make sure to read through the following directions, fully charge your
device and perform the initial Bluetooth© syncing process and you
should be up and running in no time. If you have any problems stop
on by bemwireless.com for the answers to all your questions.

Package Contents

Speaker Trio speakers x 3

Speaker Trio base unit x 1

Aux cable x 1

Power adapter x 1

User manual x 1

Compatibility

All devices enabled with Bluetooth© technology including:

•

iPhones, iPads, iPods, Smartphones, Laptops, Tablets and more.

Also compatible with any device that has a standard 3.5mm

•

earphone jack such as MP3 players, PSP, Mobile phones, etc

2

UserGuide_SpeakerTrio_Final2.indd 3 10/24/12 4:33 PM

Product Interface

1

2

1. Bluetooth© Indicator

2. Power Button

3. DC Input (12V)

4. Aux In

5. Aux Out

6. Charging Contact

Base

dc in 5v aux in au x out

3 4 5

6

Speaker

1

2

3

4

1. Volume Up

2. Volume Down

3. Power Button

4. Charging Contact

3

UserGuide_SpeakerTrio_Final2.indd 4 10/24/12 4:33 PM

Getting Started

We know you’re excited to experience your new be¯m wireless
Speaker Trio. These two easy steps will get you up and running
quickly.

Step 1: Charge It

Connect your Speaker Trio base to an outlet using the included
power adapter. Place the speakers onto the charging area of the
base. The red backlight will slowly flash during charging and goes out
when it has reached a complete charge (Approx. 3.5 hours).

4

UserGuide_SpeakerTrio_Final2.indd 5 10/24/12 4:33 PM

Step 2: Connect It

There are two options for connecting to your Speaker Trio - wirelessly
by Bluetooth© or wired using the included aux cable.

•

Connect Wirelessly

Turn the power on each of the 3 speakers followed by
powering on the base unit. Once the base is powered on
the Bluetooth© indicator will light and a tone confirming
that the unit is currently in paring mode will sound. Go to
the Bluetooth© settings on your
mobile phone, tablet or computer
to find the device named “Speaker
Trio”. When asked for a password
enter “0000”. A tone will be sound
to confirm the device has paired
successfully. Next time the Speaker
Trio and connected device will pair
automatically. After completing this
step you are ready to start playing
audio from your connected device.

Direct Connection

•

The Speaker Trio can also be connected to any device that has
a headphone jack or line out using the included aux cable.

.

5