E-Collar Technologies Barkless Pro BP-504 Owner's Manual

Barkless Pro BP-504

Thank you for purchasing the newly designed Barkless Pro
BL-504 bark elimination e-collar. We have incorporated a
conditioning tone prior to the stimulation sensation to allow for
better learning and less stress on your dog. Our product are
designed and produced in compliance with stringent quality
methods and standards.
They are subject to rigorous environmental tests including high
and low temperature, humidity, shock, dust, vibration and drop
tests.
We assemble and test all of our products in the USA.

Please feel free to contact us should you have any questions
concerning this product and our line of modern remote e-collars.
Your complete satisfaction is our only concern.

02

TABLE OF CONTENTS

CHARACTERISTICS
COMPONENTS
GETTING STARTED
CHARGING THE COLLAR UNIT
POWER ON/OFF
5 PROGRAMMING MODE
LCD DISPLAY
HOW TO PROGRAM
COUNT MODE
STIMULATION LEVELS SETTING MODE
SENSOR SENSITIVITY MODE
PAVLOVIAN TONE ON/OFF MODE
TEST MODE
HOW TO SELECT THE CORRECT STIMULATION LEVEL
INDICATOR LIGHT
RRECTLY FITTING THE COLLAR
CONTACT POINTS
REPLACEMENT OF CONTACT POINTS FOR THICKER FUR BREEDS
WARRANTY AND REPAIR
ONE YEAR WARRANTY

..............................................

...................................................

..............................................

.................................

..................................................

........................................

...................................................

..............................................

...................................................

.........................

....................................

..............................

......................................................

........

...............................................

................................

...............................................

........................................

..........................................

....

3
4
5
6
7
8

9
10
11
12
13
14
15
16
17
18
19
21
22
23

BarkLess BP-504 Manual

CHARACTERISTICS

- Incorporates Time Delay Between Stimulation Routines.

/Off Function and 10 level Stimulation Modes.

- On

- S

upport 3 Levels of Sensitivity.

- Provide Pavlovian Tone On/Off Function

03

- LED Ligh

- E

- Adaptable to Various Size Dogs.

Vibration Sensor Technology is Activated by Dog’s Barking Only.

-

- Fu

- Employs Antibacterial Plastic and Medical Grade Contact
P

t to indicate Battery Levels.

mploys 2 hours Quick Charge Li-Po Battery.

lly Waterproof and Shock Resistance.

oints to Protect the Dog’s Skin from Irritation.

BarkLess BP-504 Manual

04

COMPONENTS

· BP-504 Collar Unit with
Collar Strap

· Lithium Polymer
Charge Adaptor

· Owner’s Manual · Stainless Steel
Contact Points

BP-504

Owner's Manual

· Contact Point Tool · Seneor Post Cap

BarkLess BP-504 Manual

Bark Sensor

On/Off and Mode

Selection Button

Indicator Light

05

GETTING STARTED

Battery Charging Receptacle
& Rubber Cover

Contact Point

Collar Strap

LCD display

Barkless Pro BP-504 has one control button which can program
10 stimulation level, sensitivity, and Pavlovian mode and LCD
display.

BarkLess BP-504 Manual

06

CHARGING THE COLLAR UNIT

Indicator Light will blink “Green” under normal operation.
Solids “Red” when stimulation is applied.
Blinks “Red” when recharging is required.

Indicator light will turn solid red during charge cycles and will turn
green once it is fully charged. (approximately 2 hours)

Special Note about Battery Care

Collar Receiver is outfitted with Li-Polymer batteries which
requires specific care to assure longevity. It is best not to let the
battery be fully discharged. If it does, recharge immediately or
irreversible damage may occur.
Keep the units away from extreme heat and cold temperatures.

BarkLess BP-504 Manual

07

POWER ON/OFF

To turn on the Barkless Pro, press the button for 0.25 second
when power is off.
Barkless Pro will be turned on with buzzer sound. Initial status is
count mode.

To turn off the Barkless Pro, press the button for 5 sec when
power is on. Barkless Pro will be turned off with long buzzer
sound. LCD display will show software version before it is turned
off.

BarkLess BP-504 Manual