Easy Educator EZ-900/902
Quick Start Guide
E-Collar Technologies, Inc.
Welcome
Thank you for trusting us with your purchase of the 900/ 902 Easy Educator
Remote Education Collar. We have made every attempt to provide you
with the most technologically advanced product using the most
stringent quality and manufacturing standards.
We are confident you will be pleased with the results you will attain with
the 900/ 902 Easy Educator. Please remember you will get better results with
the use of low level stimulation combined with consistent training techniques. The use of high levels of stimulation should only be used as a last
resort and in life-threatening situations.
Good luck with your training and please feel free to contact us should you
have any questions
* This guide will familiarize you with the basic functions, programming
features and the contents of the 900/ 902 Easy Educator.
Additional information and help is available on www.ecollar.com and
e-mail by e-mailing customerservice@ecollar.com. To talk to a live
team member please contact our customer service department,
8 AM to 8 PM E.S.T., 1-855-326-5527 or (260) 357-0051. Your total
satisfaction is our only concern.
- 900/902 Easy Educator -
Table of Contents
● Characteristics ........................................................................................ 3
● Package Contents .................................................................................. 4
● Turning ON/OFF the EZ-900/902 System / Charging Instructions ......... 5
● EZ-900/902 Functions ............................................................................ 6
● LCD Display 1 Dog Mode ....................................................................... 7
● Button Description and Stimulation Button Assignment in One Dog Mode .. 8
● I Mode / Lock and Unlock Stimulation Level ......................................... 10
● Booster Level Setup / Lost Transmitter Activation ................................ 12
● EZ-900/902 One Dog Default Settings ................................................. 13
● Pairing/Syncing ..................................................................................... 14
● Expand to Two Dog .............................................................................. 15
● Button Description and Stimulation Button Assignment in Two Dog Mode .. 16
● EZ-902 Two Dog Default Settings ........................................................ 18
● Booster Level Setup ............................................................................. 19
● Lock and Unlock Stimulation Level ....................................................... 20
● Warranty and Registration .................................................................... 21
- 900/902 Easy Educator -
3
Characteristics
● 1/2 mile Range
● Employs Quick Charge Li-Polymer Batteries
● Convenient Intensity Dial for Quick Adjustment
● Stimulation Levels Adjustable from 0 to 100
● Collar Receiver Light for Night Tracking
● “Lock and Set” Stimulation Safety Feature
● User Adjustable Boosting Levels
● Patented “I” Mode Provides Instant Stimulation
● Waterproof and Shock Resistant Collar Receiver
● Easily Expandable to 2 Dogs
● Water Resistant Handheld Transmitter
- 900/902 Easy Educator -
Quick Start Owner’s
Package Contents
4
Ergonomic Transmitter
- Remote-Sender
Collar Receiver with
Strap (902 package
includes 2 Receivers
Guide
and straps)
Easy Educator EZ-900
Quick Start Guide
E-Collar Technologies, Inc.
Test Light 5/8” and ¾” Contact
Contact Point Tool
Points
Lanyard Battery Charger
(902 package contains splitter cable)
- 900/902 Easy Educator -
5
Turning ON/OFF the EZ-900/902 System
Turn ON/OFF the transmitter by pressing the lower right
button for 1 second.
Turn ON/OFF the
collar receiver by
placing the red dot on
the transmitter on the
red dot on the collar
receiver for 1 second.
Charging Instructions
Please charge the units on or before the low battery indication. It is best not
to wait to charge until the batteries are fully discharged to avoid irreversible
damage. To charge the transmitter, insert the micro USB into the transmitter
and the charger plug into the collar receiver as pictured.
Transmitter Indicator Light
One bar remaining on the LCD display
indicates charging is needed.
Solid “Red” when stimulation/tone/vibration
is applied.
Collar Receiver Indicator Light
Blinking “Green” under normal operation.
Solid “Red” when stimulation/tone/vibration
is applied.
Blinking “Amber” when battery life is getting low.
Blinking “Red” when recharging is required.
Do not allow the batteries to get hot or be fully discharged, store at room
temperature and 50% capacity charge.
- 900/902 Easy Educator -
Charging Instructions cont.
* The indicator light will turn solid red during charge cycles and turn green
when it is fully charged. (approximately 2 hours)
Special Note About Battery Care: Your e-collar is outtted with Li Polymer
batteries which requires specic care to assure longevity. It is best not to
let the battery be fully discharged and if it does recharge immediately or
irreversible damage may occur. Keep the units away from extreme heat and
cold temperatures.
We suggest charging when you see the blinking “amber” color, typically
between 24-48 hours of use to maximize the longevity of your battery life.
EZ-900/902 Functions
Easy Educator 900 provides 5 types of stimulation sensations, tone, and
vibration.
Stimulation
6
Icon
M
M+
C
C+
I
Momentary Boost Stimulation
Continuous Boost Stimulation
Function
Momentary Stimulation Send momentary stimulation (volume level)
Continuous Stimulation
Instant Mode
Icon Function
V
T
Vibration
Tone
Description
Send momentary boosting stimulation
(volume + boost Level)
Send continuous stimulation
(max 10 sec, volume level)
Sends continuous boosting stimulation
(max 10 sec, volume + boost level)
Without pressing any button, it will send continuous
stimulation by rotating volume dial. (max 45 sec)
Others
Sends vibration (max 30 sec)
Sends tone (max 30 sec)
- 900/902 Easy Educator -
7
LCD Display
1 DOG Mode
Icon
M
M+
C
C+
I
V
T
Number
Description
Momentary Stimulation Short Pulse of Stimulation
Momentary Boost Stimulation
Continuous Stimulation Up To 10 Seconds of Stimulationㅤ
Continuous Boost Stimulation Up to 10 Seconds of Boosted Stimulation
Instant Stimulation Mode
Vibration
Tone Audible Tone
Stimulation Level 0 to 100(HI) level
Short Pulse of Boosted Stimulation
Stimulation Level Displayed on the LCD,
Non Stimulation Sensation Similar to a
Remarks
Must Start From “0”
Vibrating Cell Phoneㅤ
- 900/902 Easy Educator -
8
Button Description and Stimulation
Button Assignment in One Dog Mode
The 900/902 Easy Educator has 4 control buttons which are assigned to
stimulation, vibration and tone. It also has 2 program buttons for changing
modes (P) and turning the unit ON and OFF. The convenient dial
provides for easy and sight free control of the stimulation level.
Easy Educator EZ-900/902
9
Program
Buttons
ON/OFF
P
Control Buttons
S1-Button
S2-Button
S3-Button
S4-Button
Function Description
Power ON/OFF
Night Light
Volume Lock
Stimulation Lock Level
Mode Buttons
Press more than 1 sec to turn ON
Press more than 2 sec to turn OFF
Press ON/OFF quickly to activate Light
Toggles (Blinking →
Press more than 1 sec to
Lock/Unlock Stimulation Level
Set Stimulation to Level "0"
S1 mode change: P+S1 (M C V T)
S2 mode change: P+S2 (C V T M)
S3 mode change: P+S3 (V T M C)
S4 mode change: P+S4 (T M C V)
Function Possibilities
M / C(I) / V / T
M / C(I) / V / T
M / C(I) / V / T
M / C(I) / V / T
Solid → OFF)
LCD Display
Booster
Function
To start Instant mode, rotate volume to level 0 and press a button set to continuous
1.
It is only activated when first button is M or C
M / C / V / T
S1+S2, S2+S1
S3+S4, S4+S3
"C" mode activates the "I" mode when pushed on level "0"
To exit from Instant mode, press any button or wait for the 45 second time out.
2.
- 900/902 Easy Educator -
10
I Mode / Lock and Unlock
Stimulation Level
I mode must be activated using computer interface tool. Works best with
Windows 32 bit Java.
“I” Instant Stimulation Mode
The “I” mode is a patented feature which allows the stimulation to
increase gradually as determined by the user. The gradual introduction of
stimulation provides a more gentle sensation and removes the startling
effect sometimes associated with applying a constant level of stimulation.
The dog produces less cortisol and learns to avoid the higher levels by
responding quickly to the command. The user has the exibility of
increasing the stimulation fast if the situation warrants a quick response
from the dog.
How Instant Stimulation “I” Mode Works
1. Change the mode of any S button to Continuous if not already
programmed to “C” mode : The stimulation dial must be turned to
“0” to enter the “I” mode.
2. To start the “I”, push the assigned Continuous button. The display will
flash On to indicate it is on and ready to begin stimulation.
3. Turning the stimulation will now activate the stimulation at the setting
of the dial and continue for 45 seconds.
Returning to “0” will reset the 45 second safety timer.
4. If you do not rotate the dial for 45 seconds the “I” mode will turn off
and the control button will need to be pushed again.
5. Pushing any of the other control buttons will turn off the “I” mode and
therefore require the “I” mode control be pushed again to reactivate it.
6. Again, to exit the Instant Mode, press any control button or wait for
45 seconds.
- 900/902 Easy Educator -
11
I Mode / Lock and Unlock
Stimulation Level cont.
Lock and Unlock Stimulation Level
* Important Note: Blinking “1D” Indicates Unlocked Stimulation /
Solid “1D” Indicates Locked Stimulation
1. Set the desired stimulation level to be locked by rotating volume dial.
2. Press P (Upper Left) button for more than 1 second.
3. Check LCD display to confirm “1D” icon changes blinking to solid.
4. To unlock, press P button for more than 1 second.
- 900/902 Easy Educator -
Booster Level Setup /
Lost Transmitter Activation
Booster Level Setup
1. Change the mode of any S button to Momentary if not already
programmed to “M” mode.
2. Change the Stimulation level to “0”
(Stimulation level should be unlocked)
3. Press Momentary button for more than 5 sec and enter into Booster
Level Change Mode.
4. Check LCD displays M+ / C+ icon
5. Rotate the dial to change the booster level.
(The range of booster level is from 1 to 60, default is 5)
6. Press Momentary Button again to exit from Booster Level Change
Mode.
12
Lost Transmitter Activation (6 Hour Timer)
1. Change the Stimulation level to “0”
2. Press ON/OFF button and then press P button simultaneously.
3. One short beep will sound confirming the activation of the locator
timer.
4. To deactivate, press ON/OFF button and P button one more time.
5. Two short beeps will sound confirming the deactivation of the locator
timer.
The transmitter will start beeping 6 hours from activation so plan your
6.
excursion accordingly.
- 900/902 Easy Educator -
13
EZ-900/902 One Dog Default Settings
Factory default setting of EZ-900/902 is as below. You can change Tone
Mode, Vibration Mode, and Instant Mode by using computer interface tool
which can be downloaded at
http://www.ecollar.com
Factory Default Setting
S1-Button
S2-Button
S3-Button
S4-Button
Boost Level
Tone Mode
Vibration Mode
Instant Mode Normal Mode
Momentary
Continuous
Vibration
Tone
5
Mode – 2
Mode – 4
- 900/902 Easy Educator -
Pairing/Syncing
When you change transmitters or collar receivers they will need to paired/
synced to each other for them to communicate with each other.
Pairing/Syncing (ON/OFF + S3)
1. Turn on the Transmitter.
2. Rotate the intensity dial to “0”.
3. Turn off the collar receiver. Put the red dot on the transmitter
against the red dot on the collar receiver for more than 5 seconds till
the solid green light starts blinking on and off rapidly.
4. Press the ON/OFF button and then press the S3 button (Front Top)
simultaneously.
5. Listen for confirmation sound from the Collar Receiver.
14
6. Test the collar receiver to make sure it accepted the new transmitter
- 900/902 Easy Educator -
15
Expand to Two Dog
(Press On/Off+S3+S4 for 5 sec)
EZ-900 can be easily expanded to two dog EZ-902.
When you purchase additional Collar Receiver,you can change EZ-900
Transmitter to operate lke an EZ-902, see website for owner’s manual.
1. Rotate the intensity dial to “0”.
2. Press the ON/OFF button and then press S3 button (Front Top) &
S4 button (Front Bottom) simultaneously for 5 sec.
3. Three short beep sounds will conrm that S/W is changed to EZ-902
Mode successfully. (2D icon will be appeared at LCD Display)
4. If you want to change back to an EZ-900, press ON/OFF button
+ S1 + S2 for 5 sec.
Pairing/Syncing
When you change transmitters or collar receivers they will need to be paired/
synced to each other for them to communicate with each other.
Pairing for Dog 1 (ON/OFF + S3)
1. Turn on the Transmitter.
2. Rotate the volume dial to “0”.
3. Turn off the collar receiver. Put the red dot on the transmitter against the red
dot on the collar receiver for more than 5 seconds until the solid green light
starts blinking on and off rapidly.
4. Press the ON/OFF button and then press the S3 button (Front Top)
simultaneously.
5. Listen for conrmation sound from the collar receiver.
6. Test the collar receiver to make sure it accepted the new transmitter code.
Pairing for Dog 2 (ON/OFF + S4)
1. Turn on the transmitter.
2. Rotate the intensity dial to “0”.
3. Turn off the collar receiver. Put the red dot on the transmitter against the red
dot on the collar receiver for more than 5 seconds until the solid green light
starts blinking on and off rapidly.
4. Press the ON/OFF button and then press the S4 button (Front Bottom)
simultaneously.
5. Listen for conrmation sound from the collar receiver.
6. Test the collar receiver to make sure it accepted the new transmitter code.
- 900/902 Easy Educator -
16
Button Description and Stimulation
Button Assignment in Two Dog Mode
The 900/902 Easy Educator has 4 control buttons which are assigned to
stimulation, vibration and tone. S1 / S3 buttons are programmed for Dog
1 and S2 / S4 buttons are programmed for Dog 2. It also has 2 program
buttons for changing modes (P) and turning the unit ON and OFF. The
conven-ient volume dial provides for easy and sight free control of the
stimulation level.
Volume Dial
Stimulation Level
S1-Button(1D)
S3-Button(1D)
S2-Button(2D)
S4-Button(2D)
P-Button
ON/OFF and Night
Light Control
- 900/902 Easy Educator -
17
Program
Buttons
ON/OFF
P
Control
Buttons
Function Description
Power ON/OFF
Night Lights
Volume Lock
Stimulation Level Lock
Mode Buttons
Press more than 1 sec to turn ON
Press more than 2 sec to turn OFF
1D light : ON/OFF + S1
(toggling : blink solid off)
2D light : ON/OFF + S2
(toggling : blink solid off)
1D Volume lock : P+S3 (more than 1 sec)
2D Volume lock : P+S4 (more than 1 sec)
Set Stimulation to Level "0"
S1(Dog1) mode change: P+S1 (M C V T)
S2(Dog2) mode change: P+S2 (M C V T)
S3(Dog1) mode change: P+S3 (V T M C)
S4(Dog2) mode change: P+S4 (V T M C)
Function Possibilities
1Dog 2Dog
S1-Button
S2-Button
S3-Button
S4-Button
LCD Display
Booster
Function
1.
To start Instant mode, rotate volume to level 0 and press a button set to continuouss,
"C" mode activates the "I" mode when pushed on level "0"
To exit from Instant mode, press any button or wait for the 45 second time out
2.
M / C(I) / V / T
N / A
M / C(I) / V / T
N / A
M / C / V / T / 1D / 2D
1D Booster : S1+S2, S3+S4
It is only activated when
first button is M or C
- 900/902 Easy Educator -
2D Booster : S2+S1, S4+S3
It is only activated when
first button is M or C.
N / A
M / C(I) / V / T
N / A
M / C(I) / V / T
18
EZ-902 Two Dog Default Settings
Factory default setting of EZ-902 is as below. You can change Tone
Mode, Vibration Mode, and Instant Mode by using computer interface
tool which can be downloaded on our website
Factory Default Setting
S1-Button
S2-Button
S3-Button
S4-Button
Boost Level
Tone Mode
Vibration Mode
Instant Mode Normal Mode
1D Momentary
2D Momentary
www.ecollar.com.
1D Vibration
2D Vibration
5
Mode – 2
Mode – 4
- 900/902 Easy Educator -
Boost Level Setup for Dog 1
Boost Level Setup for Dog 2
19
Booster Level Setup
Boost Level Setup for Dog 1
1. Change the mode of S1 or S3 button to Momentary if not already
programmed to “M” mode.
2. Change the Stimulation level to “0”
(Stimulation level should be unlocked)
Press Momentary button for more than 5 sec to enter the Boost
3.
Level Change Mode.
4. Check LCD displays M+ / C+ icon
Rotate the dial to change the boost level. (The range of boost
5.
level is from 1 to 60, default is 5)
Press Momentary Button again to exit from Boost Level Change
6.
Mode.
Boost Level Setup for Dog 2
1. Change the mode of S2 or S4 button to Momentary if not already
programmed to “M” mode.
2. Change the Stimulation level to “0”
(Stimulation level should be unlocked)
Press the momentary button for more than 5 sec to enter the Boost
3.
Level Change Mode.
4. Check LCD displays M+ / C+ icon
Rotate the dial to change the boosted level. (The range of boosted
5.
level is between 1 and 60, default is 5)
Press Momentary Button again to exit from Boost Level
6.
Change Mode.
- 900/902 Easy Educator -
Lock and Unlock Stimulation Level for Dog 1
Lock and Unlock Stimulation Level for Dog 2
* Important Note: Blinking “1D” or “2D” Indicates Unlocked Stimulation
SSoolliidd ““11DD”” oorr ““22DD”” IInnddiiccaatteess LLoocckkeedd SSttiimmuullaattiioonn
20
Lock and Unlock
Stimulation Level
Lock and Unlock Stimulation Level for Dog 1
1. Check LCD display to confirm 1D icon is blinking.
2.
Set the desired stimulation to lock by rotating the volume dial.
3. Press P button and S3 simultaneously and hold one second to lock.
4. Check LCD display to confirm 1D icon changes blinking to solid
5.
To unlock press P button and S3 simultaneously and hold for one
second.
6.
Check LCD display to confirm 1D icon changes from solid to blinking.
Lock and Unlock Stimulation Level for Dog 2
1. Check LCD display to confirm 2D icon is blinking.
2. Set the desired stimulation to lock by rotating volume dial.
3. Press P button and S4 simultaneously and hold one second to lock.
4. Check LCD display to confirm 2D icon changes blinking to solid
5. To unlock press P button and S4 simultaneously and hold one
second.
6.
Check LCD display to confirm 2D icon changes from solid to blinking.
* Important Note: Blinking “1D” or “2D” Indicates Unlocked Stimulation
- 900/902 Easy Educator -
21
Warranty and Registration
To register your EZ Educator please select one of the
following procedures
(1) Go to the “Products” section on www.ecollar.com
and click the “Register Your e-Collar Products” tab and
complete the form
(2) Call us at (260) 357-0051 and one of our customer
service representatives will register your products
for you, please have your serial number available.
Two Year Full Warranty:
Your product is covered by our full two year warranty. During the warranty period we will repair and or replace your product for any reason due to
workmanship and component failures. Dog chews and misuse are not
covered by the warranty and are subject to a repair/replacement fee.
- 900/902 Easy Educator -
Contact Information
E-Collar Technologies, Inc.
2120 Forrest Park Drive
Garrett, IN 46738
Toll-Free 1-855-326-5527
Toll-Free Fax 1-855-226-5527
International : 001-260-357-0051
www.ecollar.com
sales@ecollar.com
customerservice@ecollar.com
22
This product is covered by various patents including but not limited to
patents 8757098 and 8833309. Patent is pending on the Instant
Stimulation Feature on this device.
Copyright 2014 E-Collar Technologies, Inc. All Rights Reserved.
- 900/902 Easy Educator -
IMPORTANT NOTICE
23
Important Notice
About Contact Points:
Many dogs in our modern society have developed sensitivity to nickel which is a metal
in all stainless steel products. Keep a watchful eye on your dogs skin where the contact
points are touching his/her skin for redness or any signs of irritation. This should be
done hourly at first and slowly transition to once every four hours after a month of daily
wearing of the e-collar. At first notice of redness immediately switch to one of our hypo
allergenic contact points, we offer both nickel free stainless steel and titanium contact
points. Dogs with sensitive skin and certain breeds with known skin sensitivities like Pit
Bull Terriers and Boxers should be switched early in the process as a precautionary
move.
Nickel Free Stainless Steel
Available on www.ecollar.com or by calling 1-855-326-5527
- 900/902 Easy Educator -
Gear Keeper Remote Holder
Accessories
Anywear Remote Holder and Quick
Receiver shut Off Magnets
24
Dummy Collars
Bungee Collars and Plus Systems
Many more available on www.ecollar.com
- 900/902 Easy Educator -
Bungee with Quick Connect
25
Important Notice
Item should be placed out of the reach of children.
This product is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision
or instruction concerning used of the product by a person responsible
for their safety. This includes cleaning and maintenance.
Item is only to be used with the power supply (charger) provided with
this product.
Possible Metal Allergy
Dogs vary in sensitivity and may develop symptoms of a metal allergy.
Which may include irritation, redness, hair loss, sores, etc.
Please rotate collar receiver from side to side daily to check for allergies.
If allergies occur, hypoallergenic contact points are available for purchase
at www.ecollar.com or 260-357-0051
NOTICE TO PREVENT WATER DAMAGE
If Receiver is exposed to water on a
regular basis, ghten screws once or
twice a month depending on the
frequency of water exposure. Please
make sure screws are snug but not
overly ght. This will help prevent
internal water damage.
- 900/902 Easy Educator -
Notes
26
- 900/902 Easy Educator -
E-Collar Technologies, Inc.
2120 Forrest Park Drive
Garrett, IN 46738-9471
1-260-357-0051 (US & Internationa)
1-855-326-5527 (US Toll Free)
1-855-226-5527 (US Toll Free Fax)
sales@ecollar.com
www.ecollar.com
Loading...