Ecolink Intelligent Technology STLS2ZWAVE Users Manual

A Universal Electronics Company

Z-Wave Plus Smart Switch

Single Toggle

Installation Guide

© 2018 Ecolink Intelligent Technology Inc. PN STLS2-ZWAVE5

Product Overview

Easily automate overhead lights, table lamps or other accessories with the
Ecolink Z-Wave Plus Smart Switch. Simple to install in minutes by removing
existing switch plate and installing this on the switch. No need to touch any
electrical wiring.

Features

 Quick installation, no need to access high voltage wires
 Compatible with all Z-wave certified hubs & controllers
 Preserves manual control of switch
 Senses current status of switch
 Works with single gang toggle type switches

Specifications

 For indoor use only
 Operating frequency: 908.42, 916 MHz
 Operating temperature: 0° – 49°C, 32° – 120°F (ambient

temperature)

 Operating humidity 5-95% non-condensing
 2 AA batteries
 Battery Life: 1 year

Installation Instructions

(1) Identify location for Z-Wave Plus Smart Switch.
(2) Remove the switch plate cover of the existing light switch. Save the

screws for next step.

(3) Remove the swith plate cover of the Z-Wave Plus Smart Switch with

the help of a flat head screw driver.

Package contents

 1 x Z-Wave Plus Smart Switch
 2 x AA batteries
 1 x Installation Guide

© 2018 Ecolink Intelligent Technology Inc. PN STLS2-ZWAVE5

(4) Make Sure orientation switch is in the upright position relative to

how the Smart Switch is mounted.

(5) Install 2 AA batteries provided in the package.
(6) Follow the Network Inclusion steps in next section.
(7) If the switch operates in an inverted state, then toggle the position

of the orientation switch (red rectangle) to reverse the behavior.

(8) Snap the cover back onto the Z-Wave Plus Smart Switch in the

correct orientation.