ECOLINE TV7094, TV7091 Installation Instructions Manual
Day/Night Speed dome camera /
LCD-keyboard
INSTALLATION INSTRUCTIONS
TV7094
TV7091
1
Preface
Dear customer,
thank you for purchasing this ECOLINE digital surveillance camera. You made the right
decision in choosing this state-of-the-art technology.
This product complies with the current standards of domestic and European regulations. The
CE has been proven and all related certifications are available from the manufacturer upon
request.
To maintain this status and to guarantee safe operation, it is your obligation to observe these
operating instructions!
This ECOLINE speed dome camera is used in combination with video sources (cameras) and
recording devices (VHS or digital recorders) for the purpose of property surveillance. It
enables the user to build up a flexible and wide ranging surveillance. Enclosed in a
weatherproofed housing it is the ideal outdoor protection. Furthermore the ECOLINE speed
dome camera offers 6 alarm inputs which interact with the camera position. Through its
adjustable rotation speed, 360° endless rotation, 180° tilt angle and 128 preset position, the
camera offers an easy setup and a comfortable usage.
Precautions
It must be ensured that the ECOLINE speed dome camera and connected components are
kept free of moisture (cellars and similar surroundings are to be strictly avoided). Use of this
product for other than the described purpose may lead to damage of the product. Noncompliant use may also be hazardous (e.g. short circuit, fire, electrical shock). The power unit
is suitable for operation on the public power network with 230 Volt / 50 Hz (1.5A) alternating
current.
No part of the product may be changed or modified in any way. Connection to the public
power network is subject to country-specific regulations. Please be aware of applicable
regulations in advance.
To avoid fire and injury,
please observe the following:
• Securely fasten the device
at a dry location in the
building.
• Ensure sufficient air
circulation.
• Do not expose the device
to temperatures less than 10°C or more than 50°C.
• The device is designed for
indoor use only or for
outdoor use with the
suiteable outdoor housing.
• Humidity must not exceed
90% (non-condensed).
• Ensure that the voltage is
disconnected when
performing work on the
device.
Please observe the following
regulations to ensure
trouble-free operation of
your device:
• The ECOLINE speed dome
camera is supplied with
12VDC power by an
external transformer.
• The transformer should be
connected to the 230VAC
building mains by means of
a separate, electrically
protected line.
• Connection work to the
building mains is subject to
country-specific regulations.
2
General:
Improper or careless
installation work may lead to
faults and poor image
quality. Therefore please read
the instructions very carefully
and follow the installation
instructions for lines and
components precisely.
3
Content
SCOPE OF DELIVERY..................................................................................................................................5
IN CASE OF OUTDOOR INSTALLATION OF THE SPEED DOME, USE AN OUTDOOR HOUSING. ........5
OVERVIEW ..................................................................................................................................................7
SYMBOL DESCRIPTION ..............................................................................................................................7
COMPONENT AND STRUCTURE DESCRIPTION .......................................................................................8
CAMERA SETTING ......................................................................................................................................9
TERMINAL FOOT CONNECTION, DATA LINE AND SIGNAL LINE REGULATION ................................ 11
INSTALLATION OF THE SPEED DOME CAMERA.................................................................................... 12
BACK PANEL TERMINALS........................................................................................................................ 14
OPERATION.............................................................................................................................................. 15
KEYBOARD BUTTONS .............................................................................................................................. 17
SET PRESET...................................................................................................................................... 17
GO PRESET..................................................................................................................................... 18
AUTO PAN...................................................................................................................................... 18
AUTO FOCUS................................................................................................................................. 19
FOCUS CONTROL ......................................................................................................................... 19
IRIS CONTROL................................................................................................................................ 19
ALARM MANAGEMENT.......................................................................................................................... 21
ALARM INPUT................................................................................................................................. 21
ALARM OUTPUT ............................................................................................................................. 21
STOP ALARM CONDITION............................................................................................................ 21
OSD OPERATIONAL DESCRIPTION........................................................................................................ 22
SIMPLE OPERATIONAL REFERENCE TABLE............................................................................................ 25
CONNECTING PELCO-KEYBOARD (KBD200A/KBD300A) .................................................................. 26
TROUBLE SHOOTING............................................................................................................................... 29
TECHNICAL DATA ................................................................................................................................... 30
4
Scope of delivery
Packaging
ECOLINE speed dome camera
Power unit with connection cable
Installation guides
In order to control the speed dome
camera, use the keyboard (TV7091)
In case of outdoor installation of the speed dome, use an outdoor housing.
5
(TV7092) (TV7093)
6
Overview
• Speedy response with 26 times continuous
Electronic Zoom
• Auto Iris and Manual Iris Control
• Advanced DSP Camera, including Auto White Balance, Backlight Compensation and
Auto Iris Control.
• 360° Continuous Pan Rotation.
• 128 Preset Points Setup.
• Continuous Auto Focus
• Variable Speed 1°~300°/Sec
• Horizontal Rotation of 180°.
• Built in 6 Alarm Inputs and one Relay Output
• Two types of Alarm out signal are provided: NO and NC.
• Remote Control via RS-485
• Connects up to 127 Speed Dome Cameras.
• Supports PELCO protocol (D and P protocol)
• PC Control is applicable after transformation using the Communication Interface has
been completed.
auto-focus zoom lens and 10 times
～
• 12VDC Power Input (AC100
• Suitable for installation on different occasions; can be installed outside (with outdoor
dome housing), flush mount on a ceiling or in the ceiling with only the dome showing
• UVV certified
240V, 50Hz or 60Hz)
Symbol description
Function keys are shown by, framed capital boldface print letters.
Example: ENTER , AUTO FOCUS , etc.
Function key “+” indicates the order sequence.
Example: 2 8 + ENTER meaning, press the function key “ 2 “, ” 8 ”, and then ENTER .
_ :001 DEVICE
⎡
; indicate messages from the device and is shown on the control
⎢
⎣
keyboard
LCD display.
⎤
⎥
⎦
.
“n” indicates the ID number of the nth device (ID numbers ranges from 001~127).
7
Component and structure description
(2)
(1)
(3)
(4)
(1) Elektronic Alarm input or output / Video input / Power input terminal
(2) Elektronic ID position setup
(3) Elektronic Embellish Cover
(4) Mechanic Machine housing
(5) Camera
module
Transparent cover / Black housing
(5)
8
Camera setting
SW1: ID number setting
DIP switch setting according to ID number:
Connection of up to 127 Speed Dome
Cameras, each camera has its own ID
number.
Please setup each camera with its own
ID number. Else the system is not able to
differentiate between the different
camera modules. Start with ID number
001.
DIP-Schalter
SW1
Setting an ID to 000 will lead the display
to print
DEVICE N/A .
9
SW2: Protocol setup
Setup
DIP switch number
#4 #3 #2 #1
Off Off Off Off YOKO
Off Off Off On PELCO
Off Off On Off Reserviert
Off Off On On Reserviert
* Speed dome automatically detects the type of PELCO Protocol. No switch settings are
required to set D and P Protocols.
SW3: Baud rate settings
Setup
DIP switch number
#4 #3 #2 #1
Off Off Off Off 9600 BPS
Off Off Off On 4800 BPS (P)
Off Off On Off 2400 BPS (D)
Off Off On On 19200 BPS
* Setup for YOKO-protocol: SW2: Off Off Off Off, SW3: Off Off Off Off
Applied protocol
Baud-Rate
10
Loading...