Eco GEMINI Instruction Manual

Quick Guide

RC-031W/ Plus

Apple is a registered trademark of Apple Inc.
Android, Google Play and the Google Play logo
are trademarks of Google Inc.
iOS is a trademark or registered trademark of
Cisco in the U.S. and other countries and is used
under license.

®

The Wi-Fi CERTIFIED logo and Wi-Fi are
registered trademarks of Wi-Fi Alliance.

GEMINI WiFi Smart Switch

SMARTPHONE SETUP

ECO Plugs

DOWNLOAD THE ECO PLUGS APP:

Download the ECO Plugs app from the Apple App
Store (iPhone) or Google Play Store (Android).

PORDUCT OVERVIEW SMARTPHONE SETUP

(iOS 7 or higher)

(Version 4 or higher)

ECO Plugs

DOWNLOAD THE ECO PLUGS APP:

Download the ECO Plugs app from the Apple App
Store (iPhone) or Google Play Store (Android).

!

CAUTION! INDOOR USE ONLY! Do not use Wi-Fi

Plug in outdoors, damp, or wet locations.

READ ALL INSTRUCTIONS

before using the Wi-Fi Plug.

...

Recommendation:

The closer the Wi-Fi

Plug is located to the Wi-Fi Router

during set-up, the better the signal strength will be for
initial conguration.

Switch Button:

Wi-Fi Home Router

Wi-Fi Status Indicator

Light

Blinking: Ready

for programming

Plug with wall outlet

STEP 1

STEP 2

STEP 3

Your phone

Your phone

Tap the
Wi-Fi/WLAN icon

Wi-Fi/WLAN

on

Tap

iOS
Android

setting icon

＊If you purchase more than one ECO Plug, we recommend

that set up the device one by one.

EX: USA

EX: CANADA

Name Device (Lamp, TV, small appliances) and Router Password, click the
SAVE SETTING or JOIN button.

Fill in Country,

Zip Code (USA Only)

Phone Area Code (CANADA Only)

STEP 9

USA

Enter Zip Code:

(Named This Device)

(Wi-Fi’s password, if needed)

Canada Other

Home Router

Name Device:

Wi-Fi Router(WLAN):

Enter Wi-Fi Router Password:

USA

Phone Area Code:

(Named This Device)

416 (Toronto)

EX: 416 (Toronto)

2142 (Cambridge)

EX: 2142 (Cambridge)

(Wi-Fi’s password, if needed)

Canada Other

Home Router

Name Device:
Wi-Fi Router(WLAN):

Enter Wi-Fi Router Password:

/

Join

Save SettingJoin

*iOS: If you can’t find the button, please click in the password section.

＊For Canada: Please select the Canada, entering the phone area
code instead of zip code.

Your phone

Congratulations!...

STEP 10

ECO

Your phone

Light 1

(iOS 7 or higher)

(Version 4 or higher)

ECO Plugs

DOWNLOAD THE ECO PLUGS APP:

Download the ECO Plugs app from the Apple App
Store (iPhone) or Google Play Store (Android).

before using the Wi-Fi Plug.

...

Plug is located to the Wi-Fi Router

Wi-Fi Home Router

Plug with wall outlet

STEP 1

STEP 2

STEP 3

Your phone

Your phone

Tap the
Wi-Fi/WLAN icon

Wi-Fi/WLAN

on

Tap

iOS
Android

setting icon

＊If you purchase more than one ECO Plug, we recommend

that set up the device one by one.

Switch Button:

Press this button
to turn the
socket
ON/OFF.

RESET

Receptacle for
controlled device

MORE INFORMATION

Your phone

ECO Plugs

Search on “YouTube”

If you have further inquires regarding the set up Wi-Fi Plug,
please search “ECO Plugs” on the YouTube, or send an email to us.

TO DEFAULT RESET THE Wi-Fi PLUG

Press and hold this button ( )

MORE INFORMATION

ECO

Your phone

Your phone

Tap

ECO Plugs

Tap the Q&A link

Search on “YouTube”

If you have further inquires regarding the set up Wi-Fi Plug,
please search “ECO Plugs” on the YouTube, or send an email to us.

Light 1

Light 2

TO DEFAULT RESET THE Wi-Fi PLUG

When you want to change another router, please followed Default
Reset steps as below.

Wi-Fi Status Indicator

Light

Blinking: Ready for programming

Flashing: Disable connect the Wi-Fi

Press and hold this button ( )

Holding this button ( )and plug into the
wall power, until the Wi-Fi indicator turns
off, then release it.

1

2

MORE INFORMATION

ECO

Your phone

Your phone

ECO

Your phone

Tap

Tap

ECO Plugs

Tap the Q&A link

Share your feedback with us

ECO Plugs Team will reply you speedily.

Search on “YouTube”

If you have further inquires regarding the set up Wi-Fi Plug,
please search “ECO Plugs” on the YouTube, or send an email to us.

Light 1

Light 2

Light 1

Light 2

TO DEFAULT RESET THE Wi-Fi PLUG

Wi-Fi Status Indicator

Light

Blinking: Ready for programming

Flashing: Disable connect the Wi-Fi

home router

Finished! Start your setting.

Press and hold this button ( )

Holding this button ( )and plug into the
wall power, until the Wi-Fi indicator turns
off, then release it.

1

2

3

When you can see the ECO Plugs #

(Ex: ECO-XXXXXXXX)

, on your list,
please follow the smartphone setup.
(iOS & Android) (Page 3)

Wi-Fi
WLAN

blinking

OFF

instruction guide

MADE IN CHINA

SMARTPHONE SETUP

SMARTPHONE SETUP

download the eco plugs app:

DOWNLOAD THE ECO PLUGS APP:

You can download the ECO Plugs App from either the Apple

Download the ECO Plugs app from the Apple App

APP Store (iPhone) or the Goople Play Store (Android)

Store (iPhone) or Google Play Store (Android).

Scan the QR Codes below or search for ‘ECO Plugs’

ECO Plugs

125Vac 60Hz, 15A Resistive
15A General Use, 1000W Tungsten
1/2HP, 500VA Electronic Ballast
120Vac 60Hz, 8.3A Ballast

PORDUCT OVERVIEW

SETUP INSTRUCTION

READ ALL INSTRUCTIONS before using the GEMINI plug.

CAUTION! INDOOR USE ONLY! Do not use Wi-Fi

RECOMMENDATION: The closer the GEMINI plug is located

Plug in outdoors, damp, or wet locations.

!

to a WiFi router during set-up, the better the signal

READ ALL INSTRUCTIONS

strength will be for initial configuration and subsequent

Recommendation:

programming.

The closer the Wi-Fi

CAUTION! INDOOR USE ONLY! Do not use GEMINI plug

during set-up, the better the signal strength will be for

outdoors, or in damp or wet locations.

initial conguration.

before using the Wi-Fi Plug.

Plug is located to the Wi-Fi Router

...

Wi-Fi Home Router

WiFi Status Indicator

blinking light:

light

solid light:

Programming is
finished and the
GEMINI is now
ready to be used
via ECO Plugs APP

no light:

GEMINI is

Power Indicator

rebooting to
default settings

Power Indicator

This is how you perform a factory reset of the GEMINI

step 1

Press and
hold the
power button

Flashing: Disable

GEMINI is ready

connect the Wi-Fi

for programming

home router

fast blinking light

Solid Light:

GEMINI cannot find

Programming is

a WiFi router. Please reset

finished and the
power outlet is
accessible via the
APP

Light OFF:

Reboot to the
default setting

RESET THE GEMINI

blinking

 

OFF

step 2

While holding the power
button, plug the GEMINI into
a 120Vac wall outlet, THEN
release the power button
when the light turns off.

(iOS 7 or higher)

＊If you purchase more than one ECO Plug, we recommend

*If you purchase more than one GEMINI, setup each device

that set up the device one by one.

STEP 1

STEP 1

Plug in the

Plug with wall outlet

GEMINI plug

STEP 4

STEP 4

Your phone

Select the
ECO-XXXXXXXX

abcde

Xyz95

ECO-XXXXXXXX

xrgtg4

power button:

Press this button
to turn the GEMINI

Press this button
to turn the

ON and OFF

socket
ON/OFF.

reset:

Also used to reset

RESET

the GEMINI device
(see instructions
below)

Grounded

Receptacle for

receptacle

controlled device

for controlled
devices

blinking

step 3

Finished! You can
now start setting
up the ECO Plugs
APP with the
GEMINI

Home

Select the ECO-XXX
network that now
appears in your WiFi list.

STEP 7 STEP 8

STEP 7

Select Wi-Fi Network

Device [ECO-XXXXXXXX]

Home Router

Other Router A

Other Router B

**Select the WiFi home
router/office router to
which you want to connect
the GEMINI. Press the

Select the Wi-Fi home router

 icon to refresh the list

that you want to connect to

of available routers. (EX:

the Wi-Fi Plug or tap ( )

Home Router)

(EX: Home Router)



*If this ECO-XXX network does not show in your list, perform a

＊If your router is not showed on the Wi-Fi list, please select

( ) to enter the Router’s information.

**If your router does not show up in the list, press the  icon to

manually enter your router’s information

(Version 4 or higher)

one by one.

STEP 2 STEP 3

STEP 2

Your phone



Tap the setting icon 
on your iPhone or Android.
(NOT in the ECO Plugs APP)



factory RESET of the Gemini

iOS

Tap

(Not the ECO Plugs APP)

Once your phone
successfully connects,
move to step 6.

setting icon

Android

STEP 5 STEP 6

STEP 5

Your phone

Wi-Fi

ECO-XXXXXXXX

Xyz95

xrgtg4
Home

Fill in all your information.
See more info in step 9.

STEP 3

Your phone

Tap the
Wi-Fi/WLAN icon



Wi-Fi/WLAN

Select the WiFi option
on your smartphone
to select a new
network

STEP 6

Your phone

Tap the
ECO Plugs APP



Open the ECO Plugs APP

STEP 8

USA

Canada Other

Enter Zip Code:

Name Device:
Wi-Fi Router(WLAN):

Home Router

Enter Wi-Fi Router Password:

(Wi-Fi’s password, if needed)

Fill in the information

(Named This Device)

on

3

1

EX: USA

EX: USA

EX: CANADA

Name Device (Lamp, TV, small appliances) and Router Password, click the
SAVE SETTING or JOIN button.

Fill in Country,

Zip Code (USA Only)

Phone Area Code (CANADA Only)

STEP 9

USA

Enter Zip Code:

(Named This Device)

(Wi-Fi’s password, if needed)

Canada Other

Home Router

Name Device:

Wi-Fi Router(WLAN):

Enter Wi-Fi Router Password:

USA

Phone Area Code:

(Named This Device)

416 (Toronto)

EX: 416 (Toronto)

2142 (Cambridge)

EX: 2142 (Cambridge)

(Wi-Fi’s password, if needed)

Canada Other

Home Router

Name Device:
Wi-Fi Router(WLAN):

Enter Wi-Fi Router Password:

/

Join

Save SettingJoin

*iOS: If you can’t find the button, please click in the password section.

＊For Canada: Please select the Canada, entering the phone area
code instead of zip code.

STEP 10

EXPLORE THE TIMER

Programmable Timer - Setting ON/ OFF events.

Astronomic Timer - The controlled device will turn ON/ OFF

at sunset or sunrise.

Countdown Timer - Setting countdown ON/ OFF events.

Security Random - Setting a range of time, run the irregular

times.

Holiday Random - Three options to run at random times.

7

CONTROL MULTIPLE DEVICES

IF YOU HAVE MORE THAN ONE Wi-Fi PLUG PROGRAMMED
ON THE APP: You can choose which Wi-Fi Plug (which controlled

device, such as Light 1, Light 2... etc.) you want to control by
sliding the desired icon to the lower left position.
The Wi-Fi Plug name, such as “Light 1”, will change color from
white to yellow. Chosen device is now able to be programmed or
edited, such as changing timer settings, setting the security
random, updating cloud service... etc.

＊NOTE: YOU CAN CONNECT TO A MAXIMUM OF TWELVE (12) Wi-Fi PLUGS
VIA THE ECO PLUGS APP.

USA

Canada Other

Enter Zip Code:

Name Device:
Wi-Fi Router(WLAN):

Home Router

Enter Wi-Fi Router Password:

(Wi-Fi’s password, if needed)

2142 (Cambridge)

(Named This Device)

STEP 9

STEP 9

EX: CANADA

USA

Phone Area Code:

Name Device:
Wi-Fi Router(WLAN):

Home Router

Enter Wi-Fi Router Password:

(Wi-Fi’s password, if needed)

Canada Other

416 (Toronto)

(Named This Device)

CONTROL MULTIPLE DEVICES

CONTROL MULTIPLE GEMINIs

*ONLY IF YOU HAVE MORE THAN ONE GEMINI PROGRAMMED ON THE

IF YOU HAVE MORE THAN ONE Wi-Fi PLUG PROGRAMMED

ECO PLUGS APP: You can choose which GEMINI (EX: Light 1, Light 2,

ON THE APP: You can choose which Wi-Fi Plug (which controlled

Light 3, etc.) you want to control by sliding the desired icon to the lower

device, such as Light 1, Light 2... etc.) you want to control by

left position.

sliding the desired icon to the lower left position.

The GEMINI plug name (EX: Light 1, Light 2, etc.) will change color from
white to yellow. The chosen GEMINI is now able to be programmed

The Wi-Fi Plug name, such as “Light 1”, will change color from

or edited; such as changing timer settings, setting security settings,

white to yellow. Chosen device is now able to be programmed or

updating the cloud service, etc.

edited, such as changing timer settings, setting the security
random, updating cloud service... etc.

Save SettingJoin

/

Zip Code (USA) EX: 14606 (Rochester)

Select Country

Fill in Country,

Name your device (EX: Patio Lights, Front lights, etc) and input

Name Device (Lamp, TV, small appliances) and Router Password, click the

the password of the WiFi router you have selected (if no password, leave blank**)

SAVE SETTING or JOIN button.

Press the JOIN or SAVE SETTING button to confirm settings.

*iOS: If you can’t find the button, please click in the password section.

*Your smartphone should reconnect to your home router. If it does

＊For Canada: Please select the Canada, entering the phone area

not, go back into your phone WiFi settings to connect back to it.

code instead of zip code.

**If this does not work, see the FAQs section on page 4, question #12

Zip Code (USA Only)

Phone Area Code (Canada) EX: 416 (Toronto)

Phone Area Code (CANADA Only)

Join

for more information.

STEP 10

Your phone

EX: 2142 (Cambridge)

EX: 416 (Toronto)

Your phone

ECO

Congratulations!...



Light 1

Complete setup... Successful !

ADD MULTIPLE GEMINIs to the APP

ADD MULTI Wi-Fi PLUG TO THE APP

Repeat steps 1-10 for each additional GEMINI. Remember to give each

Repeat steps 1-10 for each additional device. Remember to give

GEMINI a different name (EX: Light 1, Light 2, Light 3, etc.).

each device a different name (for example, Light 1, Light 2, etc.).

*Each controlled device requires a seperate GEMINI unit

＊Note: each controlled device requires a separate Wi-Fi Plug.

ADD MULTIPLE USERS TO THE ECO PLUGS

ADD MULTIPLE USERS TO ECO PLUGS

Repeat the steps below for each additional user

Repeat steps below for each additional user:

Your phone

Tap the setting icon 

iOS

Tap

on your iPhone or Android.

(Not the ECO Plugs APP)

(NOT in the ECO Plugs APP)

Link to the same router

Link to the same router

as used by the first smartphone

as used by first smartphone

(EX: Home Router) This is

(EX: Home Router)

6

also the same router that the
GEMINI is configured to.

setting icon

Android

Your phone

Wi-Fi

Home Router

Xyz95

xrgtg4
54546ew

 

Your phone

Tap the
Wi-Fi/WLAN icon

Wi-Fi/WLAN



*For cloud function. Refer

＊Note: For the cloud function,
please review page 12.

on

Your phone

Tap the
ECO Plugs APP

to page 3

*You can connect up to a maximum of twelve (12) GEMINI plugs via

＊NOTE: YOU CAN CONNECT TO A MAXIMUM OF TWELVE (12) Wi-Fi PLUGS
VIA THE ECO PLUGS APP.

5

EXPLORE THE ECO PLUGS APP ICONS

EXPLORE THE ECO PLUGS APP ICONS

MORE - Learn more about the ECO Plugs APP, including a

More - Learn more about ECO Plugs app, including a Q & A

FAQ section

section.

ELECTRIC BILL - Displays the power consumption of the

Electric Bill - Displays the power consumption of the selected

selected GEMINI device.

controlled device:

the ECO Plugs APP.

GREEN circle - Low (less than 800 watts)

GREEN circle: Low (less than 800 watts)

YELLOW circle - Moderate (800-1250 watts)
RED circle - High (more than 1250 watts)

YELLOW circle: Moderate (800-1250 watts)
RED circle: High (more than 1250 watts)

SETTINGS - Edit the settings of your GEMINI, such as

Setting - Setting your Wi-Fi Plug, such as transfer local Wi-Fi

transfer local WiFi into CLOUD mode, or rename the device.

into cloud mode, or rename the device.

TIMER - This is where you set up automated ON/OFF

Timer - Setting ON/ OFF programs (up to a maximum of 12

programs (up to a maximum of 12 custom events)

Custom ON/ OFF events).

MAIL BOX - Share any feedback on the ECO Plugs APP

Mail Box - Welcome share any feedback on this App.

*If your plugged-in GEMINI exceeds 16 amps,

*Note: If your plugged-in device exceeds

the GEMINI will automatically turn OFF.

16 amps, the Wi-Fi Plug will automatically
turn OFF.

2

Delete

Enter editing
mode

Tap

Tap

Delete Mode

• iOS

• Android

EDITING THE TIMER PROGRAM

Tapping and holding

Delete

＊When the device change
color from white to yellow

When the device change

Enter editing
mode

Tap

Delete Mode

Tapping and holding

Delete

Enter editing
mode

Delete Mode

Tapping and holding

Delete

Tap

Enter editing
mode

Enter editing mode

Tap

Tap

Delete Mode

• iOS

• Android

EDITING THE TIMER PROGRAM

Tapping and holding

Delete

＊When the device change
color from white to yellow

＊When the device change
color from white to yellow

EXPLORE THE TIMER FUNCTION

Enter editing
mode

Tap

Tap

Delete Mode

• iOS

EDITING THE TIMER PROGRAM

Delete

＊When the device change
color from white to yellow

Tap

Enter editing
mode

Enter editing mode

Tap

Tap

Delete Mode

• iOS

• Android

EDITING THE TIMER PROGRAM

Tapping and holding

Your phone

Delete

Edit

Delete

＊When the device change
color from white to yellow

＊When the device change
color from white to yellow

Tap

＊When the device change
color from white to yellow

Tap

PROGRAMMING THE TIMER

EXPLORE THE ECO DISPLAY

Your phone

NO YES

Cloud status activated

Light 1

ECO

Your phone

Light 2

1. Time Frame - You can select the

started date to calculate your electricity.

*Please press the

date that you can

revise the started date.

2. Kilowatt/ Hour Price - If you know the

cost of your electricity per kilowatt hour,

EXPLORE THE SETTING

EXPLORE THE ECO DISPLAY

Cloud status inactive

Cloud Service - Activates remote access function of device

through 3G, 4G, LTE, public Wi-Fi network, or other Wi-Fi
router.

DST - Daylight Savings Time, the time automatically move ahead
1 hour on Sunday of the second week in March at 02:00am, and
will automatically adjust back 1 hour on Sunday of the first week
in November at 02:00am in every year.

Light 1

ECO

Your phone

Light 2

Your phone

NO YES

Cloud status activated

Light 1

ECO

Your phone

Light 2

1. Time Frame - You can select the

started date to calculate your electricity.

*Please press the

date that you can

revise the started date.

2. Kilowatt/ Hour Price - If you know the

cost of your electricity per kilowatt hour,
you can enter the unit price.

*Please press the

Hour Price that you

can revise the unit price.

3. Average Cost - To calculate the cost to operate the chosen

controlled device, such as Light, for a selected period of time.

4. Power Factor/ Energy Eciency - The maximum of efficiency

is 1, the higher value, which means the higher energy efficiency.

＊When the device change
color from white to yellow

Cloud status activated

Light 1

ECO

Your phone

Light 2

EXPLORE THE TIMER

EDITING THE TIMER PROGRAM

• iOS

iOS

EDITING THE PROGRAMMED TIMER



Enter editing

Enter editing mode

mode

PROGRAMMABLE TIMER - Setting a simple ON/OFF event.

Programmable Timer - Setting ON/ OFF events.

Select ON time and OFF time. (EX: ON - 06:30PM OFF ­05:00AM) Can also select what day(s) of the week it effects.
COUNTDOWN TIMER - You will select an ON date (EX:

Countdown Timer - Setting countdown ON/ OFF events.

03/29/17) and time (EX: 07:30PM) and an OFF date (EX:
04/02/17) and time (EX: 05:00AM)

Astronomic Timer - The controlled device will turn ON/ OFF

COUNTDOWN TIMER - GEMINI will turn ON/OFF at sunset or
sunrise. Can also select what day(s) of the week it effects.

at sunset or sunrise.

HOLIDAY RANDOM - The GEMINI will turn ON/OFF at random

Holiday Random - Three options to run at random times.

times based on three simple settings (Night, Day, All Day)

SECURITY RANDOM - The GEMINI will turn ON/OFF at

Security Random - Setting a range of time, run the irregular

random times between a set of selected start and end dates

times.

and times.

PROGRAMMABLE RANDOM - This icon increases or

Programmable Random - Increase or decrease the time on

30

decreases the time of your ON/OFF events by 30 minutes

your ON/ OFF setting by 30 minutes.

PROGRAMMING THE TIMER

PROGRAMMING THE TIMER

 

the created timers will be

Tap

＊When the device change

*Selected GEMINI will be

color from white to yellow

highlighted YELLOW, and

associated with that unit.

Select the timer function

Select the timer function

from the list

from the list



＊When setting the timer, be sure that the Wi-Fi plug must connect

*When setting up a new timer function, make sure the GEMINI
is connected to your home/office router, and that the GEMINI is

with router as well as the Wi-Fi plug connect with wall outlet. Once

plugged into a 120Vac wall outlet. After the timer is set, it will run

complete the setting timer, it runs the program independent even

the program even when disconnected from the WiFi router. The

disconnected the Wi-Fi router. If leaving Wi-Fi plug from wall outlet,

GEMINI will also remember programmed timers when removed

the timer function will be terminated but program still memorized

from power.

in smartphone.

NOTE : If you preprogram it and move it to a different area with
completely different WiFi signals, the GEMINI will attempt to
connect to one of these unsuccessfully. This will make the
preprogrammed timer NOT function. In this case, you may have to
RESET the GEMINI and set it to a router in the area.

Tap

Tap

Tap

*Selected GEMINI will be
highlighted YELLOW, and
the created timers will be
associated with that unit.

Tap

Android

Tap

＊

*Selected GEMINI will be

color from white to yellow

highlighted YELLOW, and

9

the created timers will be
associated with that unit.

EXPLORE THE SETTING

EXPLORE THE TIMER FUNCTION

DST - Daylight Saving Time : The time will automatically

DST - Daylight Savings Time, the time automatically move ahead

move ahead 1 hour on Sunday of the second week of March @

1 hour on Sunday of the second week in March at 02:00am, and

02:00am, and will automatically adjust back 1 hour on Sunday of

will automatically adjust back 1 hour on Sunday of the first week

the first week in November @ 02:00am every year.

in November at 02:00am in every year.

CLOUD SERVICE - Activates remote access function of the GEMINI

Cloud Service - Activates remote access function of device

through 3G, 4G. LTE, public WiFi, or other WiFi routers. You can

through 3G, 4G, LTE, public Wi-Fi network, or other Wi-Fi

then access your GEMINI from almost anywhere in the world!

router.

Your phone

ECO

Light 1

Light 2

Cloud status INACTIVE

*Selected GEMINI will be
highlighted YELLOW, and

Cloud status inactive

the cloud setup will be

＊When the device change

associated with that unit.

color from white to yellow

Tap

Your phone

 

NO YES



Your phone

Add device to
the cloud

Your phone

ECO

Light 1

Cloud status ACTIVATED

Delete mode

Delete Mode

Your phone

Edit

Delete

Light 2

3

FAQ

1. My Gemini seems to have lost its signal, how do I get it back?

If your Gemini seems to not be responding to changes made via
Smartphone, it may need to be set up again. Page 2 details this
process. If you cannot find the ECO-XXXX in your WiFi setup, you may
have to RESET the Gemini to factory settings. This process is detailed
on page 1 of this guide.

2. Can I program this at home/office on my WIFI then take it to
the field and have it work there automatically?

Unfortunately, the Gemini WILL NOT work if you setup the device
previous to bringing it to where it will be used. It will default to
looking for the previously setup WiFi or try to connect to a new
WiFi signal there. If NO WiFi signal is present, it will perform the
previosuly setup timers.

3. What types of Transformers does it fit in?

The GEMINI fits into MOST traditional low voltage lighting
transformers.

4. Will it still work in a closed stainless steel transformer?

The GEMINI will work in an enclosed stainless steel transformer.
However, it may diminish the signal from your router to the GEMINI,
so you may have to get the GEMINI closer to your router. Any
openings in the transformer may help as well, just make sure they
are still water tight. You may also invest in a WiFi signal booster to
strengthen the signal from you WiFi router.

5. Does it create its own WIFI signal?

Yes, out of the box the Gemini will create its own WiFi signal (it will
show up as ECO-XXXX when finding it on your smartphone). You then
will integrate it with your home/office router (see page 2 for details on
setting that up).

6. Why does it shut off before the programmed time?

If you have your GEMINI seemingly turning on or off at odd times,
double check your TIMERS in on your GEMINI. You may have
redundant or overlapping timers you setup by mistake.

7. What is the difference between GM1 & GM2?

The only differences are the physical size, and the location of the
3-pronged grounded outlet.

8. How do I program sunset on and timed event off?

First, you would set up an ASTRONOMIC TIMER. Set it to turn ON
the GEMINI at Sunset, and OFF at Sunrise. THEN, create a timed
event with the PROGRAMMABLE TIMER that turns ON the GEMINI
at 11:00PM and OFF at the desired time, say 1:00am. Since the
ASTRONOMIC timer has already told the GEMINI to turn ON at
Sunset, the PROGRAMMABLE TIMERs first event will be redundant,
and will NOT effect the GEMINI. Then, at 1:00am the GEMINI will turn
OFF as programmed by the PROGRAMMABLE TIMER function. (see
page 3 for more help)

9. How many devices can I put on the app?

You can set up to 12 Gemini units on the ECO Plugs APP.

10. Can I / how do I save my customers’ info so I can access it later
if I have more than x devices on my app?

All custom timers and info will be saved via the customers WiFi
router onto the Gemini unit. So anytime you or anyone else connects
to that routers WiFi and open the ECO Plugs, all those timers on each
of the Gemini units associated with that router will show up.

11. How do I set it up so more than one person in the house can
have access?

See page 2 section: ADD MULTIPLE USERS TO ECO PLUGS

12. Can you use the GEMINI on a router with NO password?

It is okay to use the Wi-Fi without a password. However, it may be
necessary to check the router’s Firewall, and add the ECO Number
(ECO-78017E7F) to its accepted ports. Also, check that the router is
on P2P mode. If it is not, please change to P2P mode.

13. Is a WiFi signal required?

It is highly recommended for a WiFi signal to be present for the
GEMINI to be connected to (see page 2). However, if NO WiFi signal
is present where the GEMINI is being installed, it is possible to
preprogram the GEMINI and bring it on site. It will perform the
preprogrammed timer functions. However, since it is not connected
to WiFi, it is not associated with the zip code and may waver on
the exact time of day. In addition, if any new WiFi signals become
available, the GEMINI will attempt to connect to them and will no
longer perform the preprogrammed timer functions.

FOR MORE INFORMATION

CONTACT
INFORMATION

Business Address

22 Harcourt Road
Rochester, New York 14606

(585) 254 – 8010
(585) 254 – 8033

www.illuminfx.com
[e-mail]

COPYRIGHT

Entire contents © illuminFx Lighting Systems.
All rights reserved.

Reproduction in whole or in part without
permission is strictly prohibited.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance
20cm between the radiator and your body.
Contains FCC ID: PAGECO-PLUGS

Made in China

This equipment has been tested and found to comply with the limits for Class B digital
device, pursuant to part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the RCC Rules.
Operation is subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may
cause undesired operation of the device.

FCC Caution: Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment.

Phone
Fax

4