ECLIPTEK EB52F5 Service Manual
EB52F5 Series
• Temperature Compensated
Crystal Oscillator (TCXO)
• HCMOS Output
EB52F5
• 3.3V Supply Voltage
• Stability to 1.5ppm
H 8.3
L 20.3
W 13.0
• Internal mechanical trim
• External voltage
OSCILLATOR
control option available
NOTES
__________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
ELECTRICAL SPECIFICATIONS
Frequency Range
Operating Temperature Range
Storage Temperature Range
Supply Voltage (V
)
DD
Input Current
Frequency Stability
Aging (at 25°C)
Output Voltage Logic High (V
Output Voltage Logic Low (V
Rise Time / Fall Time
Duty Cycle
Load Drive Capability
Control Voltage Range
Control Voltage (External)
Frequency Deviation
Linearity
Internal Trim
Input Impedance
Phase Noise (at 19.440MHz)
Measured at Steady State at 25°C, at Nominal V
at Nominal V
C
vs. Initial Frequency Tolerance
vs. Operating Temperature Range
vs. Input Voltage (V
±5%)
DD
vs. Load (±10%)
)
OH
)
OL
20% to 80% of Waveform
at 50% of Waveform
P ositive Transfer Characteristic
Referenced to F
at VC = 1.65VDC, V
O
Measured at 25°C, V
=3.3VDC, VC =1.65V
DD
= 3.3V
DD
DC
DC
Measured at 25°C, at Nominal VDD, at Nominal V
at 10Hz Offset
at 100Hz Offset
at 1kHz Offset
at 10kHz Offset
at 100kHz Offset
1.544MHz to 44.736MHz
See Table 1
-55°C to 125°C
±5%
3.3V
DC
,
15mA Maximum < 20.000MHz
DD
25mA Maximum > 20.000MHz
±1.0ppm (at Nominal V
See Table 1 (at Nominal V
±0.3ppm Maximum
±0.2ppm Maximum
±1ppm / year Maximum
90% of V
10% of V
Minimum
DD
Maximum
DD
6 nSeconds Maximum
50 ±5(%)
15pF HCMOS Load Maximum
to V
0.0V
DC
DD
1.65VDC ±1.35V
DC
±7ppm Minimum, ±20ppm Maximum
±10% Maximum
±3ppm Minimum (Top Access)
10kOhms Typical
C
-70dBc/Hz Typical
-100dBc/Hz Typical
-130dBc/Hz Typical
-140dBc/Hz Typical
-145dBc/Hz Typical
and VC , at 25°C)
DD
and VC )
DD
MANUFACTURER CATEGORY
ECLIPTEK CORP. OSCILLATOR EB52F5 14-PIN DIP 3.3V
800-ECLIPTEK www.ecliptek.com for latest revision
SERIES PACKAGE VOLTAGE CLASS REV.DATE
Specifications subject to change without notice.
OS3B 06/04
INITIAL TOLERANCE
G=±1.0ppm Maximum
FREQUENCY STABILITY
Two Digit Code Per Table 1
OPERATING TEMP. RANGE
One Letter Code Per Table 1
PART NUMBERING GUIDE
EB52F5 G 15 A V - 12.800M - G
AVAILABLE OPTIONS
Blank=None (Standard)
CB=Cut Leads to 2.540 ±0.500 (0.100” ±0.020”)
CC=Cut Leads to 3.175 ±0.500 (0.125” ±0.020”)
CD=Cut Leads to 3.810 ±0.500 (0.150” ±0.020”)
CE=Cut Leads to 4.445 ±0.500 (0.175” ±0.020”)
G=Full Size Gull Wing
FREQUENCY
EXTERNAL TRIM
N=None (No Connection on Pin 1)
V=Voltage Control on Pin 1
MECHANICAL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
Pin 1: Voltage Control or No Connect
Pin 7: Case Ground
Pin 8: Output
Pin 14: Supply Voltage
ENVIRONMENTAL/MECHANICAL SPECIFICATIONS
Characteristic Specification
Fine Leak Test MIL-STD-883, Method 1014, Condition A (Internal Crystal Only)
Gross Leak Test MIL-STD-883, Method 1014, Condition C (Internal Crystal Only)
Mechanical Shock MIL-STD-202, Method 213, Condition C
Vibration MIL-STD-883, Method 2007, Condition A
Lead Integrity MIL-STD-883, Method 2004
Solderability MIL-STD-883, Method 2002
Temperature Cycling MIL-STD-883, Method 1010
Resistance to Soldering Heat MIL-STD-883, Method 210
Resistance to Solvents MIL-STD-883, Method 215
MARKING SPECIFICATIONS
Line 1: ECLIPTEK
Line 2: XX.XXX M
M=MHz
Frequency (5 Digits Maximum + Decimal)
Line 3: XX Y ZZ
Week of Year
Last Digit of Year
Ecliptek Manufacturing Identif ier
Note: Pin 1 shall be designated with a dot
MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE
ECLIPTEK CORP. OSCILLATOR EB52F5 14 pin DIP 3.3V
800-ECLIPTEK www.ecliptek.com for latest revision
Specifications subject to change without notice.
OS3B 06/04
Loading...