Eclipse - Fujitsu Ten VCD3200 User Manual

E-iSERV Operation Guide

CD/USB Multi-Source Receiver with Bluetooth wireless technology

We appreciate your purchase of this CD receiver. Please read through this manual for correct operation. We suggest that after reading it you keep this manual in a safe place for future reference.

Motion Picture customization

Importing display data

Motion Picture Customize

Load the Display data in the USB memory or CD-R, which is downloaded from the E-iSERV (website), to the main unit. For details of the operation, see ‘Importing display data (DISP Data)’ in the Owner’s Manual. The application for creating Motion Picture screens (Cutting Board) can be downloaded, allowing you to create your own original Motion Picture screens. You can create your own ﬁ le by downloading the cutting board application. You can download the ready-made ﬁ les from the server.

How to download the Motion Picture ﬁ les

Download the Motion Picture from the E-iSERV website, and then write it to USB

memory or CD-R.

ATTENTION

• Data downloaded from the ECLIPSE website (E-iSERV) should be saved in folders on the USB memory as follows: the user must create and name their folders as shown in the diagram below).

(NOTE: in order for the system to properly recognize and load DISP data,

ECLIPSE

DISP

ZZZZZZZ.XXX

Must be created by user

File extension

Motion Picture

.eld

• The main unit cannot be in USB music playing mode during this procedure.

• The main unit can only import ﬁ les located in the root directory of the CD-R.

ZZZZZZZ.XXX

File extension

Motion Picture .eld

• Disc formats that may be used are as follows:

• CD-ROM (MODE 1)

• CD-ROM (MODE2_FORM 1)

* NOTE: CD-ROMs written in MODE2_FORM2 cannot be read.

• When data is imported from a CD-R, the importing process will take a long time if a lot of data other than the import data has also been saved to the CD-R.

+ 3 hidden pages