Eclipse - Fujitsu Ten CD7200 mkII User Manual
E-iSERV Operation Guide
CD/USB Multi-Source Tuner with Bluetooth
wireless technology
We appreciate your purchase of this CD tuner.
Please read through this manual for correct operation.
We suggest that after reading it you keep this manual
in a safe place for future reference.
Motion Picture customization
Importing display data
Motion Picture Customize
Load the Display data in the USB memory or CD-R, which is downloaded from the E-iSERV
(website), to the main unit. For details of the operation, see ‘Importing display data (DISP Data)’
in the Owner’s Manual.
The application for creating Motion Picture screens (Cutting Board) can be downloaded, allowing
you to create your own original Motion Picture screens.
You can create your own fi le by downloading the cutting board application. You can download the
ready-made fi les from the server.
How to download the Motion Picture fi les
Download the Motion Picture from the E-iSERV website, and then write it to USB
11
memory or CD-R.
ATTENTION
<When using a USB memory drive>
• Data downloaded from the ECLIPSE website (E-iSERV) should be saved in folders on the USB
memory as follows:
the user must create and name their folders as shown in the diagram below).
(NOTE: in order for the system to properly recognize and load DISP data,
ECLIPSE
DISP
ZZZZZZZ.XXX
Must be created by user
File extension
Motion Picture
.eld
• The main unit cannot be in USB music playing mode during this procedure.
<When using a CD-R>
• The main unit can only import fi les located in the root directory of the CD-R.
ZZZZZZZ.XXX
File extension
Motion Picture .eld
• Disc formats that may be used are as follows:
• CD-ROM (MODE 1)
• CD-ROM (MODE2_FORM 1)
* NOTE: CD-ROMs written in MODE2_FORM2 cannot be read.
• When data is imported from a CD-R, the importing process will take a long time if a lot of
data other than the import data has also been saved to the CD-R.
Load the downloaded data from the USB memory or CD-R to the unit. For details of
22
the operation, see 'Importing display data (DISP Data)' in the Owner's Manual.
Loading...