Eclipse - Fujitsu Ten CD3421 User Manual
OWNER'S MANUAL
We appreciate your purchase of this receiver.
Please read through this manual for correct operation.
We suggest that after reading it you keep this manual
in a safe place for future reference.
MODEL CD3421
ESN E3 High-Power CD Receiver
with CDC/E-COM Control
by FUJITSU TEN
R
2
For your safety in using the
CD3421
Warnings and caution signs, illustrated below, are posted
throughout this manual as well as on the CD3421. They show
safe and correct ways to handle the product so as to prevent
personal injury to you and others and avoid damage to property.
Before reading through the manual, take time to read through
and learn the important information listed in this section.
This sign indicates a situation in which
incorrect handling through disregard of a sign
might result in death or serious personal
injury.
This sign indicates a situation in which
incorrect handling through disregard of a sign
might result in personal injury or may result
solely in damage to property.
•
Do not modify this system for use other than that specified
herein. Also, do not deviate from the installation procedures
described herein; Eclipse will not be held liable for damages
including, but not limited to serious injury, death or property
damage resulting from installations that enable unintended
operation.
•
This unit is intended for operation in DC 12-volt, negativegrounded vehicles
only. Never use it in 24-volt vehicles such
as heavy trucks or diesel cars with cold-region specifications.
•
Do not change CDs while driving. Doing so may result in an
accident.
Warning
Caution
Warning
3
•
Do not place the vinyl storage bag over a person. It may
cause a serious accident or death by suffocation.
•
Do not adjust the controls while driving the car. To adjust the
controls, stop the car in a safe location.
•
To prevent accidents, store batteries for the remote control
out of the reach of small children.In case a child swallows a
battery, consult a physician immediately.
•
Do not disassemble or rebuild this product. Doing so may
cause an accident, fire or electrical shock.
•
When it is necessary to replace the fuse, always use a fuse of
the correct rating (number of amperes). Use of fuses with
higher amperage ratings may cause a fire.
•
Do not operate the product in a malfunctioning condition, for
instance, when the audio does not play. Doing so may result
in an accident, fire or electrical shock.
•
If an abnormal situation occurs, such as foreign matter
entering or liquid splashing on the product, or smoke or a
strange odor emitting from the unit, shut off the product
immediately and consult the dealer from whom you purchased
it. Continued operation may cause an accident, fire or
electrical shock.
•
Do not install this product in locations where it may obstruct
the driver's view, or where it may endanger passengers in the
vehicle. Otherwise, an accident or injury may result.
•
Do not install this product in locations where it may interfere
with the operation of the steering wheel, shift lever, brake
pedal, etc. Otherwise, an accident or injury may result.
•
When installing this product, never use existing nuts or bolts
that secure parts of the fuel tank, or the steering or braking
systems. Otherwise improper steering or braking or a fire may
result.
Warning
4
•
To prevent a short circuit from occurring, disconnect the
battery's negative terminal before installing this product.
Otherwise, an electric shock or injury may result.
•
When using an existing nut and/or bolt from the vehicle to
ground this product, do not use any that secure parts of the
steering or braking systems. Otherwise, an accident may
result.
•
Bundle cables and harnesses with electrical tape or wire ties
to prevent them from interfering with moving parts. If they
should entangle the steering wheel, shift lever or brake pedal,
an accident may result.
•
Never supply power to another electrical appliance by splicing
or tapping into this product's power lead(wire).Otherwise, the
current capacity of the wire will be exceeded, resulting in a fire
or electric shock.
•
Never attempt to disassemble or modify the product.
Otherwise, an accident, fire or electric shock may result.
•
When installing the product into a vehicle with a passenger
side air bag, do not secure it to the air bag's cover or in places
where it may impede air bag deployment. Otherewise, proper
aie bag operation may not be ensured in the event of an
accident, causing injury or death.
•
When making holes using a drill or simiar tool, be sure to wear
protestive eyewear. Otherwise, an injury such as loss of
evesight may result.
•
Exposed wires must be insulated with electrical tape.
Othewise, a short circuit, fire, or electric shock may result.
Warning
5
•
Play the audio at a moderate volume level that permits you to
hear sounds from outside the car. Driving without being able
to hear outside sounds may result in an accident.
•
Keep foreign objects out of the disc slot. They may cause fire
or electrical shock. Another possibility is that discs may be
damaged or become stuck.
•
Do not stick your fingers or hands into the disc slot. Doing so
may cause personal injury.
•
This product must be operated only as on-board equipment,
or it may cause electrical shock or injury.
•
Do not play distorted sounds for long periods of time;
the speakers may overheat and cause a fire.
•
This product uses an invisible laser light. In case a problem
develops, be sure to consult the dealer from whom you
purchased the product. Do not disassemble or rebuild the
unit; rebuilding it may expose you and others to a dangerous
laser emission (which would damage eyesight) or cause an
accident.
•
Never use batteries other than those specified. Do not mix
new and old cells. Doing so may cause a fire or personal injury
due to a battery explosion or chemical leaks.
•
Pay attention to the (+) and (-) polarity of the battery when
installing it in the product. Incorrect installation may cause
personal injury or product damage due to a battery explosion
or chemical leakage.
•
For best results, this product should be installed by a
professional installer. .
Contact the dealer whom you purchased the product for an
appointment.
•
When installing this product, be sure to use the supplied
mounting hardware. If parts other than those supplied are
used, the unit may be damaged internally, or may not be held
in place securely and become dislodged.
Caution
6
•
Avoid installing this product in places where it may get wet,
such as near windows, or in places that are moist or dusty.
Presence of liquid, moisture or dust inside this product can
cause short circuiting, resulting in smoke or fire.
•
Do not install this product in locations where it cannot be
fastened securely, such as places subject to frequent
vibretion. Otherwise, it may become dislodged and cause an
accident or injury.
•
Do not block this product's vent or heat sink. If either is
blocked, excessive heat build-up may occur and cause a fire.
•
If this product is not connected properly, a short circuit, fire or
accident may occur.
•
When routing cables, use care so that they do not contact
sharp metal parts such as brackets or screw tips. Otherwise,
a short circuit, electric shock, fire or accident may result.
•
Do not obstruct the vent on this product. If blocked, excessive
heat build-up may occur and cause a fire.
Caution
7
Table of Contents
Operating Precautions .............................................. 10
Notes on Operation...................................................................... 10
About compact discs .................................................................. 12
About cleaning a CD ................................................................... 14
Names of controls and parts .................................... 15
ESN (Key CD) Security Operating Procedure .......... 16
How to program the Key CD ....................................................... 16
How to cancel the Key CD .......................................................... 17
How to change the Key CD ......................................................... 18
How to resume normal operation (ESN security lock out) ............ 19
What happens if an incorrect CD is inserted? .............................. 20
How to turn the Security indicator on/off ..................................... 21
How to read the Electrical Serial Number .................................... 21
Basic operation ......................................................... 22
Turning the power on and off ...................................................... 22
Listening to a CD ......................................................................... 22
Listening to the tuner ................................................................... 23
Adjusting audio volume ............................................................... 24
Displaying the clock ..................................................................... 24
Others ......................................................................................... 25
How to operate the CD player .................................. 29
Listening to CDs .......................................................................... 29
Advancing to the next track or returning to
the beginning of the track being played ....................................... 30
Playing the beginning of tracks (SCAN) ........................................ 30
Repeating the same track (REPEAT) ............................................ 31
Playing tracks in random order (RANDOM) .................................. 31
Ejecting the disc .......................................................................... 31
How to operate the tuner .......................................... 32
Tuning to a station ....................................................................... 32
8
Entering stations into memory automatically
(The automatic preset mode: ASM) ............................................. 33
Manually setting stations into memory ......................................... 34
Preset station scan ...................................................................... 35
FM reception characteristics ........................................................ 36
How to use an optional Card remote control .......... 39
Precautions in use of the remote control ...................................... 39
Cleaning the remote control ....................................................... .39
Turning the power on/off ............................................................. 40
Adjusting the audio volume .......................................................... 40
Switching playback modes .......................................................... 40
How to play the tuner .................................................................. 41
How to play CDs ......................................................................... 42
Switching the remote control settings .......................................... 43
Replacing the battery .................................................................. 44
How to use an optional NOB remote control ........... 45
Turning the power on/off ............................................................. 45
Adjusting the audio volume .......................................................... 45
Switching playback modes .......................................................... 46
How to play the tuner .................................................................. 46
How to play CDs ......................................................................... 47
Illuminating the NOB remote control ............................................ 48
Enabling the optional E-COM future ............................................ 48
Switching the remote control settings .......................................... 49
Replacing the battery .................................................................. 50
How to operate the receiver with an optional CD
changer connected ................................................... 52
Basic operation ........................................................................... 52
If you have a question: .............................................. 55
Displaying information (for troubleshooting) .................................. 56
Specifications ............................................................ 59
Before installation .......................................................61
Components ............................................................................... 61
Setting the system-selector switch .............................................. 61
9
Mounting Instruction...................................................62
Mounting the main unit................................................................. 62
Names of lead wires and destinations ......................................... 64
System ........................................................................................ 65
Operating precautions
10
Notes on Operation
◆
Operating Precautions
<Your CD3421 will perform well over a long period of time through correct
handling and care.>
• For your safety, play only at volume levels that allow outside sounds to
be heard.
• Use only audio compact discs.
This player can only play compact discs
bearing the logo shown to the left.
• It may not be possible to play back some
tracks on CD-Rs.
• It may not be possible to play back CD-Rs
with certain characteristics, or CD-Rs
which are scratched, dirty, or which have
been left inside a vehicle for long periods.
• CDs cannot be played back until all
sessions recorded on the CD-R have been
closed.
• CD-RW discs cannot be played back.
• Do not insert anything other than a CD into
the disc slot.
Do not insert any foreign objects, such as
coins or credit cards, into the disc slot. Be
especially watchful of children’s mischief in
this regard.
• Avoid severe mechanical shock.
When the player is subjected to severe
vibration while traveling over a rough
surface, playback may be intermittent.
When a situation like this occurs, resume
playback after returning to a smoother
road.
11
Operating precautions
• About dew condensation
In cold or rainy weather, just as the interior
glass surface gets fogged, dew (water
condensation) may also settle on the deck.
When this occurs, disc playback may
become intermittent or impossible.
Dehumidify the air in the vehick for a while
before resuming playback.
• Cleaning the disc slot
The disc slot tends to get dusty. Clean it
occasionally to prevent accumulated dust
from scratching the discs.
Operating precautions
12
• The signal recorded on a compact disc is read by a laser beam, so
nothing touches the disc surface. A scratch on the recorded surface or
a badly warped disc may cause deteriorated sound quality or
intermittent playback. Observe the following precautions to ensure high
quality sound performance:
• Do not leave an ejected disc in the disc
slot for very long; the disc may warp.
Discs should be stored in their cases and
kept away from high temperature and
humidity.
• Do not stick a piece of paper or tape on,
nor write on or scratch, either side of a
disc .
• Discs spin at a high speed inside the
deck. Keep cracked or warped discs out
of the player to avoid damaging it.
• Avoid touching the recorded surface when
handling a disc; handle discs by their
edges.
About compact discs
13
Operating precautions
About CD accessories
• Do not use accessories
(stabilizers, protective seals, laser
lens cleaners, etc.) sold for
“improving sound performance”
or “protecting CDs.” The
changes in CD thickness or
outside dimensions made by
these accessories may cause
problems in the player.
• Please be sure NOT to attach
any ring-shape protector(or
other accessory) to your discs.
Those protectors are commercially
available and said to protect disc
and to improve sound quatily(and
antivibration effect), but they can
do more harm than good in
regular uses. The most common
problems are Insert /Eject
related problems and "No
playback" problems due to the
protectorring that came off in the
disc machanism.
About brand new CDs
• You may notice that some brand
new discs are rough around the
center hole or outside edge.
Remove the rough edges with
the side of a ballpoint pen, etc.
Rough edges may prevent
proper loading in the deck.
Flakes from the rough edges
may also stick to the recorded
surface and interfere with
playback.
Rough Edges
Ballpoint
pen
Flakes
Recorded surface
Rough
Edges
Operating precautions
14
• Use a commercially available compact disc
cleaner to clean a CD, wiping lightly from
the center to the edge.
• Do not use benzine, thinner, LP record
spray or other cleaners on CDs. They may
damage a CD’s finish.
XXXX
XXXX
XXXX
About cleaning a CD
About borrowed CDs
• Do not use a CD with glue or
remnants of adhesive tape or
labels. They may cause the CD
to get stuck inside or damage
the deck.
How to remove CDs
• When removing the ejected disc,
pull it straight out along the slot.
Pressing downward in the
process may scratch the
recorded surface of the disc.
OKAY
NO GOOD
About irregularly-shaped CDs
• Specially-shaped CDs, like
heart-shaped or octagonal CDs,
cannot be played. Do not
attempt to play them, even with
an adapter, since they may
damage the player.
15
Names of controls and parts
◆
Names of controls and parts
Front View
※NOTE : Double function button → "E-COM" & "MUTE" functions
• Though the words "press" and "tap" are used in the text for
the operation of the
[TU]
button, and
[ BND ]
button, the button is actually slid in the or direction.
[E-COM]button※
[CUSTOM]button
[AUDIOCONTROL]button
DISCSLOT
[ (EJECT)]button
[FUNC]button
[SOURCE]
button
[RESET]
button
Buttons
[1]to[6]
[BND]button
[TU]button
[MODE]button
ESN (Key CD) security operating procedure
16
[FUNC]button
Button[1]
◆
ESN (Key CD) security operating
procedure
■ How to program the Key CD
1 .
Turn off the main unit power.
2 .
Press and hold button [1], then the [FUNC]
button, and hold both for more than one
second.
A [SEC] message appears, then in two seconds it will
change to [DISC].
The CD3421 is now ready to accept your Key CD in the
CD slot.
3 .
Insert the CD into the slot.
A [SEC] message appears, the Key CD is ejected.
17
ESN (Key CD) security operating procedure
[FUNC]button
Button[1]
• If there is a problem with the inserted CD, an [ERR]
message will appear for two seconds and the CD will be
ejected. Reinsert the ejected CD.
• If a CD causes the [ERR] message to appear twice in a
row, a [CHANGE] message will appear for two seconds.
Try another CD.
• The Security indicator will flash whenever the vehicle’s
ignition is switched off.
■ How to cancel the Key CD
1 .
Turn off the main unit power.
2 .
Press and hold button [1], then the [FUNC]
button, and hold both for more than one
second.
A [SEC] message appears, then in two seconds it will
change to [DISC].
The CD3421 is now ready to accept your Key CD in the
CD slot.
3 .
Insert your Key CD into the slot.
A [CANCEL] message appears, the Key CD is ejected.
The Key CD is cancelled.
ESN (Key CD) security operating procedure
18
•
This process cancels the protection for the ESN
deck.
• If power to the CD3421 is disconnected, then
reconnected, a key CD will not need to be inserted in
order to return the unit to normal operation.
• Inserting a CD other than the Key CD will not cancel the
protection. Instead, the display will show [ERR] for two
seconds, then the normal CD playback mode will activate.
■ How to change the Key CD
1 .
First, cancel the existing Key CD.
Refer to “How to cancel the Key CD.”
2 .
Next, program a new Key CD.
Refer to “How to program the Key CD.”
19
ESN (Key CD) security operating procedure
■ How to resume normal operation
(ESN security lock out)
If power to the CD3421 is disconnected while ESN security
is active (a Key CD was programmed), operation is disabled
until power is restored and the unit unlocked. Follow this
procedure to resume normal operation.
1 .
When the power is turned on after
disconnecting the battery power, a [SEC]
message will appear for two seconds.
Thereafter, the message changes to [DISC]
and the CD3421 is ready to accept your Key
CD into the slot.
2 .
Insert your Key CD.
If the correct CD is inserted, an [OK] message will
appear for two seconds and the CD will begin playing.
• If an incorrect CD is inserted, an [ERR] message will
appear for two seconds, after which the CD will be
ejected.
• You must use the same CD used for Key CD
programming; a duplicate CD may not work properly.
ESN (Key CD) security operating procedure
20
[FUNC]button
Button[6]
■ What happens if an incorrect CD is
inserted?
1 .
An [ERR_] message will be appear, then
change to a flashing [DISC], then the CD will
be ejected.
You will have five uninterrupted attempts to insert the
correct CD.
2 .
After the 5thincorrect attempt, the display
reads [HELP].
3 .
If [HELP] appears on the display, press button
[6], then the [FUNC] button, and hold them for
five seconds .
4 .
Press the [FUNC] button.
You will have five more attempts to insert the correct
disc.
•
Number of errors: Numbers indicated the number of
errors that occurred.
●Note●
If after 10 tries the correct Key CD is not insereted, the
display reads [CALL 800]; the unit must be returned to
Eclipse to be reset. In this case, please contact your
Eclipse dealer for assistance or call Eclipse directly at
(800)233-2216
YourkeyCDcanbeeasilyforgotten.Write
thealbumnameinaremindernote(Pg.71).
21
ESN (Key CD) security operating procedure
[FUNC]button
Button[2] Button[4]
■
How to turn the Security indicator on/off
Once ESN security is activated, the indicator flashes
whenever the vehicle’s ignition is turned off, warning
potential thieves that the unit is protected. However, if you
do not want this visible deterrent, it may be turned off.
1 .
With the power is turned off,
press button[2],
then the [FUNC] button and hold both for more
than a second.
2 .
[INDICATOR flash] or [INDICATOR OFF] appears
on the display.
[IND.FLASH] means the security indicator will flash when
the vehicle’s ignition is off, and [IND. -----] means it will
not. Repeat the above steps to reactivate the flash
mode.
■
How to Read the Electronic Serial Number
1 .
Turn off the main unit power.
2 .
Press button [4], then the [FUNC] button, and hold
both for more than a second.
[ESN] appears on the display, followed by an eight-digit
number; this number is your electronic serial number (ESN).
You may use this number to identify your Eclipse CD3421
in the event it is recovered after being stolen.
Basic operation
22
[SOURCE]button
Buttons[1]to[6]
[BND]button
[TU]button
◆
Basic operation
This section covers basic operating procedures.For
additional details, please refer to the sections on specific
functions.
■Turning the power on and off
1 .
Press the [SOURCE] button.
Less than two seconds : Each tap will switch
modes from Tuner
→
Disc→PWR OFF (Stand by).
More than two seconds : Off
•If a car is not equipped with an ACC position (for example,
a European car), keep the [SOURCE] button depessed for
more than two seconds.
■ Listening to a CD
1 .
Insert a CD into the disc slot, label side up.
The CD will immediately start playing.
•When a CD is already loaded, pressing the [SOURCE]
button repeatedly to switch to the CD mode.
Loading...