DVD-Video / USB Multi-Source Receiver /
7" Wide Screen Monitor / Navigation /
Built-in Bluetooth ® wireless technology
We appreciate your purchase of this main unit.
Please read through this manual for correct operation.
We suggest that after reading it you keep this manual
in a safe place for future reference.
The symbols described below are found in this instruction manual as well as on
the device itself to insure its proper and safe usage and to prevent injury or
damage to property. Make sure you understand the meaning of these symbols
before reading the rest of this manual.
Precautions for Use
The following symbols will precede information useful for preventing damage to the
main unit as well as for its smooth operation.
WARNING
This sign indicates a situation in which incorrect handling through
disregard of a sign might result in death or serious personal injury.
CAUTION
This sign indicates a situation in which incorrect handling through
disregard of a sign might result in personal injury or may result solely in
damage to property.
IMPORTANT
Follow this advice to prevent malfunctions or damage to the main unit.
Perform the indicated action in the event of a malfunction.
ATTENTION
Useful information for the smooth operation of the main unit.
CHECK
Facts to keep in mind when operating the main unit.
Please read all materials such as manuals and warranties that have come with
the product. ECLIPSE will not be responsible for unsatisfactory product
performance due to failure to follow these instructions.
Changes to product specifications may result in differences between content
of the manual and features of the product.
● Do not modify this system for any uses other than that specified herein. Also, do not deviate
from the installation procedures described herein. Eclipse will not be held liable for damages
including, but not limited to serious injury, death or property damage resulting from installations
that enable unintended operation.
● The main unit requires a 12V DC power supply. The main unit should not be installed in any
vehicle which does not have a 12 V power system with a ground-connected negative side. An
installation other than the one intended may cause severe damage to the main unit, electric
shock or personal injury.
● Never install the main unit where it will interfere with safe operation of the vehicle.
● Never block the drivers' view. Do not install the main unit where it may interfere with operation
of the brakes, the steering or safety systems, such as seat belts and air bags.
● Before drilling holes in a vehicle for installation, be sure to confirm the locations of pipes, tanks,
electrical wiring, and other vehicle systems and components to ensure that there will be no
interference or contact. In addition, apply rust prevention and leak prevention measures at the
drilling area. Otherwise, fire or electric shock could occur.
● When installing the main unit, do not remove or alter existing vehicle fasteners, including nuts,
bolts, screws, clips, and fittings. Never detach, move or alter existing vehicle wiring, including
electrical grounds and straps. Alteration of existing vehicle components may make vehicle
unsafe to operate.
● Before installation, remove the negative (-) battery terminal to prevent shocks, electrical arcing,
fires, and damage to vehicle wiring and the main unit you are installing.
● Secure wiring with non-conductive tape or plastic ties so that wires do not interfere with vehicle
operation, including the brake pedal, gear shifter and steering. Position wires so that they will
not be rubbed, abraded, or damaged by moving vehicle components, including power seats.
● To avoid damage to the main unit and vehicle, including fire, never supply power to an installed
main unit in a way that will overload the capacity of an existing vehicle circuit. Never leave a
power supply wire or connection uninsulated. Always install supplied fuses, circuit breakers,
and relays.
● Air bags are a vital part of a safety system. Never install main unit in a way which will alter air
bag wiring or interfere with air bag deployment. Air bags must function properly in the event of
an accident.
● When installation is complete, test all vehicle electrical systems to ensure they operate
correctly, including lights, horn, brake lights, and emergency flashers.
● For your protection, never use a power drill without wearing safety glasses or goggles.
Debris or broken drill bits may cause severe eye injuries, including blindness.
● Use electrical tape to insulate the ends of all wires, even if they are not used. Proper insulation
prevents arcs, shocks and fires.
● Some devices require the use of batteries. Never install main unit where young children can get
access to batteries. If a battery is swallowed, seek immediate medical attention.
● When the vehicle is in motion, never take your eyes off the road to make adjustments to the
main unit. To prevent accidents, keep your eyes on the road. Do not lose concentration on your
driving when operating or making adjustments to the main unit.
● The driver should not look at the screen while driving. Doing so may result in as accident.
14
14
● Do not place foreign objects in the disc insertion slot or iPod/USB input terminal. Fire or shocks
may result.
● Do not disassemble or alter this main unit. Doing so may result in an accident, fire or shock.
● Do not let water or foreign objects enter the internal parts of this main unit. Doing so may result
in smoke, fire or shock.
● Do not use when main unit is malfunctioning (the screen is not lit or no sound comes out). Doing
so may result in an accident, fire or shock.
● Always replace fuses with fuses of identical capacity and characteristics. Never use a fuse with
a higher capacity than the original fuse. Using the wrong type of fuse may cause a fire or severe
damage.
● If foreign objects or water enters the main unit, smoke or a strange odor may be emitted. If this
occurs, stop using the main unit immediately and contact your dealer. Accidents, fire, or shocks
may result if you continue to use the main unit under these conditions.
● The driver should not change the Disc or iPod/USB memory while driving. Doing so may result
in as accident. You must first stop or park your car in a safe location and then proceed to
remove or insert the Disc and/or iPod/USB.
● Plastic bags and wrappings may cause suffocation and death. Keep these objects away from
babies and children. Never place bags or wrappings over anyone's head or mouth.
● Be sure to park the vehicle in a safe location and set the parking brake before watching DVDs
or videos. For safety reasons, only the sound of DVDs or videos will be emitted while the vehicle
is in motion.
15
15
Before Use
Safety precautions
CAUTION
● Wiring and installing this main unit requires expertise and experience. Professional installation
is recommended. Consult with your dealer or a professional installation expert. Incorrect wiring
may damage the main unit or interfere with safe operation of the vehicle.
● Use only specified accessory parts. Using other parts may cause damage to the main unit or
cause parts to dislodge and fall or fly off the main unit.
● Do not install the main unit in places where it may be exposed to dew condensation (around the
air conditioning hose, etc.), or in locations where it may come in contact with water, high levels
of moisture, dust or oily smoke. If water, moisture, dust or oily smoke enters this main unit,
smoke, fires or malfunctions may result.
● Do not install in places subject to direct sunlight or where it may be hit directly by hot air from the
heater. This may increase the interior temperature of the main unit, resulting in fires and
malfunctions.
● Do not impede the air flow of the heat sink or vents of this main unit. Impeding the air flow will
cause the interior of the main unit to overheat, and fires may result.
● Connect as specified in the installation manual. If not connected correctly, fires or accidents
may result.
● Install wiring in a manner in which cables will not be pinched by movable parts such as seat
rails, and screw parts of the vehicle body. Accidents, fires and shocks may result from
disconnection and electrical shorts.
● Install wiring in a manner in which cables will not come in contact with metal parts. The wiring
may be be damaged by contact with metal parts, resulting in fire and shocks.
● Avoid all contact with hot surfaces when wiring the main unit. High temperatures may damage
wiring, causing shorts, arcing and fires.
● When changing the installation location for this main unit, please consult the dealer where you
bought it for safety reasons. Expertise is necessary for removal and installation.
● Keep volume to a reasonable level so that you can hear sounds from outside the vehicle,
including warning sounds, voices, and sirens. Failure to do so may cause an accident.
● Be careful that your hands and fingers do not get pinched when adjusting the tilting angle or
closing the display. Injuries may result.
● Do not put your hands or fingers into the disc insertion slot or iPod/USB input terminal.
Injuries may result.
● Do not touch hot parts of the main unit. Fire may result.
● The volume should be set at a moderate level to avoid hearing damage when the main unit is
powered on.
● Do not operate when sound such as distortion is being emitted.
● The main unit uses invisible laser light. Do not disassemble or alter this main unit. If any
problems occur, contact the dealer where you purchased the main unit. Altering this main unit
may cause exposure to laser emissions (which may damage your eyesight), or result in an
accident, fire or shocks.
● If the main unit is dropped or the front panel is damaged, turn off the power to the main unit and
contact your dealer. If used in this condition, fires or shocks may result.
16
16
IMPORTANT
● When there is a lot of vibration – when driving on a bad road for example – the main unit may
become inoperable due to it not being able to read data from the disc.
● In cold temperatures, condensation may accumulate on the lens for readings CDs and DVDs
immediately after turning ON the heater. Wait approximately 1 hour for the condensation to
evaporate and the device will operate normally.
Contact the store where you purchased the device if normal operation does not resume after
several hours.
● If using this receiver immediately after having purchased it or after having stored it
disconnected from the vehicle battery, the present location may not be displayed accurately.
Wait a short while and the GPS positioning will correct the displayed position.
● This device is precision-engineered equipment and the information that you record on it after
purchase can be lost as a result of static electricity, electrical noise, vibration and other
influences. It is recommended that you keep a separate record of the information you store in
the main unit.
● Note that the following events are not covered by the warranty.
a Corruption or loss of the data stored in the main unit by the purchaser resulting from failure or
incorrect operation of the main unit, or any problems associated with it, or due to the effects
of electrical noise or other influences.
b Corruption or loss of the data stored in the main unit by the purchaser resulting from misuse
of the main unit by the purchaser or a third party.
c Corruption or loss of data stored in the main unit by the purchaser resulting from failure/repair
of the main unit.
* Please note that by installing or using the main unit, you are regarded as having consented to
the points above.
17
17
Before Use
Viewing this Document.
Section title
A title is assigned for each section.
Item title
A number and title is
assigned for each
item.
Operation title
A title is assigned for
each operation .
Detailed operation
title
A title is assigned for
each detailed
operation.
Operation procedure
Describes the
operation.
Proceed with the
operation as per the
numerical order.
Operation screen
A screen showing
the operation will
appear.
CHECK
In this document, the main unit is generally described using the screens which appear when the
optional devices are connected.
Navigation is mostly described using the North - upwards 1 screen.
About switch display.
When a panel button is to be pressed, button names are shown as ( , , etc.).
When a touch switch is to be touched, switch names are shown as or [ccc].
18
18
○○○
Before Use
About This Receiver
Control Names and Operations
You can operate this receiver by pressing the buttons (panel buttons) or by touching the
switches displayed on the screen (touch switches).
■ Panel buttons
Press each panel button to operate it.
a Phone buttonPress to make a telephone call.
b VOL buttonPress to adjust volume of audio.
Press to display the audio operation screens.
c AV button
d NAVI buttonPress to display the navigation menu screen.
e MENU buttonPress to display the (audio/info) menu screen.
f TUNE/TRACK button
g MUTE buttonPress to mute sound.
h OPEN/TILT buttonPress to open display or adjust angle of screen.
Press to adjust the screen image quality or screen brightness. (Press for
1 second or more)
For radio mode:
Press to select station manually.
Press to select station automatically. (Press for 1 second or more)
For CD, MP3/WMA, USB, and iPod mode:
Press to select a track or music file.
Press to fast forward or fast reverse track or music file. (Press for 1
second or more)
For DVD, DivX, and iPod-video mode:
Press to select videos or chapters.
Press to fast forward or fast reverse videos and chapters. (Press for 1
second or more)
19
19
Before Use
About This Receiver
■ Touch switch
Touch the switches on the screen to operate.
IMPORTANT
Touch the touch switches with your finger.
Operating touch switches with the point of hard objects such as ballpoint pens or mechanical
pencils can damage screen.
Touch switch
About touch switch operations
● Keep touching the touch switch until “beep” is emitted in response. (When guide tone is set
to ON.)
● To protect the screen, touch the touch switch lightly with your finger.
● When there is no response from switch, remove your finger from the screen and touch
again.
● Disabled touch switches have their color toned down.
● When the switch function is enabled, the switches return to brighter colors.
20
20
Turning the POWER ON or OFF
At ignition, this receiver automatically switches on and displays the Navigation screen*. When
the engine is switched off, this receiver switches off.
* The Navigation screen displays your present location. The Audio operations screen displays
screen of audio source that was playing on last use.
■ Turn on the power
The Caution screen is displayed automatically. After selecting a language, touch [ I Agree ] to
display the Navigation screen.
<Openingscreen>
Enginekey
<Cautionscreen>
<Navigationscreen>
■ Turn off the audio
● Touch on the Menu screen
● To turn off the audio power when the Navigation screen is displayed, first switch to the Source
● When the audio power is turned off, touch the source you wish to change to on the Source
● You cannot turn off the navigation power.
21
Audio Off
(If you are on the Navigation screen, switch to the Menu screen to do this.)
ATTENTION
screen,
screen. For details, see
“Switching the Audio Source” on page 124.
21
Before Use
About This Receiver
Loading/Unloading a
Disc
When you listen to music, insert a CD into the
drive slot. Also, when you play a movie, insert
its DVD into the slot.
■ Loading a disc
IMPORTANT
This receiver can play 8cm CDs and 8cm
DVDs. To avoid disc problems, insert a disc
without using an adapter.
CAUTION
● You may not be able to open or close the
display when the gearshift lever is set to P
in an automatic transmission car or 1/3/5
or r in a manual transmission car; or
when a bottle or a similar object is placed
in the cup holder. To open or close the
display safely, set the gearshift lever to N
(automatic transmission car) or to the
Neutral position (manual transmission car)
in advance, or empty the cup holder. Make
sure that the car is not in motion by
applying the parking brake and
appropriately stepping on the foot brake in
order to prevent damage or injury.
● Do not place a cup or can on the display
while the display is opened. Doing so may
damage the display.
● When a disc is loaded, do not press
CLOSE
or .
Press .
1
Touch .
2
● The display will open to reveal insertion
slot.
DISC
Disc slot
22
22
Insert a disc into the slot.
3
■ Unloading a disc
● The display will close automatically when
the disc is inserted.
● Hold a DVD or CD correctly (by inserting
your finger in its center hole and by holding
the disc edge by another finger), face the
disc label side upward, and insert the disc
into the slot.
● When you insert a DVD into slot, its movie
will be played in the DVD mode.
● When you insert a CD into slot, its music
will be played or the MP3/WMA play will
start.
Disc
IMPORTANT
● When unloading a disc, use the following
notes.
Automatic transmission (AT) car:
If it is difficult to unload disc when the shift
lever is in the P position, shift it to the N
position. (If your car has a column shift
lever, shift it to the P or N position.)
Manual transmission (MT) car:
If it is difficult to unload disc when the shift
lever is in “1”, “3”, “5” or “r” position, shift it
to the Neutral position.
● Take care NOT to close the display when
the ejected disc remains in the slot. If this
caution is not observed, this receiver or the
disc may be scratched.
● Do not attempt to close the front panel by
hand. Doing so may damage the display.
● Do not put cups, cans, or any other objects
on the display when it is open. Doing so
may damage the display.
● Wipe and clean the display immediately if
juice or other liquid spills onto it. If it is not
cleaned, the display may be damaged.
● To protect the display from heat and dust,
keep the display closed except when you
load or unload a disc.
ATTENTION
Press for a second or more to open the
display.
23
23
Before Use
About This Receiver
Press .
1
Touch .
2
● The disc will be ejected automatically.
3
● Press to close the display.
DISC
After removing the disc, touch
CLOSE
.
Adjusting the Display
Angle
When the screen shines due to ambient
sunlight, you can adjust the angle of the
display.
CAUTION
When adjusting its angle, take care not to
pinch your fingers. Otherwise you may hurt
yourself or the display may fail.
IMPORTANT
● Do not load a disc when the display is
tilted. If this caution is not observed, this
receiver or the disc may be scratched.
● When adjusting the display angle, use the
following notes.
Automatic transmission (AT) car:
Adjust the display angle so as not to get in
the way when shifting the AT lever to any
of the P, r, or N positions. (If the lever shift
is interfered with, do not tilt the display.)
Manual transmission (MT) car:
Adjust the display angle so as not to get in
the way when shifting the MT lever to any
of the 1/3/5 or r positions. (If the lever
shift is interfered with, do not tilt the
display.)
24
24
1
Press .
After adjusting the angle, press
3
Touch or of the angle
2
adjustment.
● :
Each touch returns the display from the
tilted state by 1 step (5°). (Maximum 7
steps, 35°)
● :
Each touch tilts the display by 1 step (5 °).
(Maximum 7 steps, 35°)
ATTENTION
● You can open the display even when it is
tilted. When you close the display, it returns
to the preset angle.
● If you tilt the display and turn the ignition key
OFF, the display will return to the upright
position. However, when you turn the
ignition key to the ACC or ON position, the
display returns to the preset angle.
About “SD memory card”
slot
● “SD memory card” slot of this unit is used
for map update.
● Once all our map update service are set,
we will announce it on our homepage.
ATTENTION
SD Logo is a trademark.
25
25
Before Use
About This Receiver
About Modes of this Receiver
The main modes of this receiver are MENU, Navigation, and Audio.
12
3
ModeMain functions
Navigation
1
(press )
Audio
2
(press )
Main menu
3
(press )
* Some of these functions cannot be used when driving.
● Display navigation menu screen
● Set destination, guidance
● Receive AM/FM radio
● Receive HD Radio
● Receive SIRIUS/XM satellite radio
● CD, MP3/WMA player operations
● Bluetooth audio player operations
● DVD/DivX player operations
● Display VTR video
● iPod operations
● Picture quality adjustment
● Displays audio menu
Change audio source
● Displays information menu
ESN setting
Steering mode switch setting
Rear View camera setting
26
26
Starting each Mode
■ About screen display
Press the following switches to switch among
screens.
■ Navigation screen
Press .
■ Audio operations screen
Press .
*1
(when operating as CD player)
.
If DISC is loaded or USB or iPod is connected
while the Navigation screen is displayed, the
screendisplay will appear.
After a short time, the screen display
disappears automatically.
Screen display
ATTENTION
When the iPod is disconnected, a screen
corresponding to the audio source of the
preceding mode is displayed.
(OFF screen)
*1Displayed when audio function is in
operation. For audio operations, see
“Switching the Audio Source” on page
124
*2Displayed when audio function is OFF.
*2
.
27
27
Before Use
About This Receiver
Operation Conditions of this Receiver
You can or cannot operate this receiver in the following conditions (the ignition key positions).
c: Operable; ×: Inoperable
Engine switch
Function
Navigation/
settings and
information
Audio function×cc
Video function×cc
Loading and
unloading of DISC
and “SD memory
card”/Display
angle adjustment
Turns OFFACC
×cc
After switching
the engine
OFF, the
display can be
closed.
ON, vehicle at
*1
rest
ccc
*1When parking brake is on.
*2When safety mode is set to on.
*3Video not displayed.
ON, vehicle in
motion
When the vehicle
is in motion, some
functions become
inoperable for
safety reasons*2.
When the vehicle
is in motion, some
functions become
inoperable for
safety reasons.
When the vehicle
is in motion, some
functions become
inoperable for
safety reasons*3.
Display open
×
×
×
Display angle
cannot be
adjusted
ATTENTION
Disabled switches are toned down in color and inoperable. Operating an inoperable switch when
the vehicle is in motion may result in the display of an operation prohibited message.
28
28
Loading...
+ 202 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.