Warnings and caution signs, illustrated below, are posted throughout this manual as well as
on the AVN5435. They show safe and correct ways to handle the product so as to prevent
personal injury to you and others and avoid damage to property.Before reading through the
manual, take time to read through and learn the important information listed in this section.
Cautions for use
* The illustrations of screens shown in this manual may differ from the actual screens of the
product.
This sign indicates a situation in which incorrect handling
Warning
Caution
The symbol shown below indicates that you should know about the information in order to
carefully follow it or you should remember the information for its helpfulness.
through disregard of a sign might result in death or serious
personal injury.
This sign indicates a situation in which incorrect handling
through disregard of a sign might result in personal injury or
may result solely in damage to property.
A point it will be helpful to remember.
Information you should know
• Please read all materials such as manuals and warranties that have come with the product.
• Fujitsu Ten will not be responsible for unsatisfactory product performance due to failure to
follow these instructions.
• Changes to product specifications may result in differences between content of the manual
and features of the product.
Please use care in handling the manual.
Forcefully spreading or pulling on pages may result in falling out of the binding.
Use the manual carefully.
1
Table of Contents
Introduction
How to use this manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
The Index by Topic simplifies searches for explanations
about individual features. When confused by an
operation, use the Index by Topic to search for information
about the operation.
8
9
Introduction
How to use this manual
Section title
A title is assigned for each
section.
Item title
A number and title
is assigned for
each item.
Operation title
A title is assigned
for each operation
purpose.
Operation screen
A screen showing
the operation will
appear.
Detailed operation title
A title is assigned for
each detailed
operation purpose.
Operation procedure
Describes the
operation.
Proceed with the
operation as per the
numerical order.
10
Section side heading
Only the section side
heading will appear.
Attention
Additional points
regarding the
operations are given
here.
Introduction
11
Introduction
Features
DVD player with sharp video and dynamic sound
(Page 66)
Plays DVD Video recorded with high quality
images and sound.
(DVD media is able to record a movie with
high quality video and digital sound that
exceeds the quality of CD media.)
MP3 player for music discs having 1/10
compression (Page 52)
Plays CD-R (recordable) discs that have been
compiled in MP3 format. (MP3 is a format that
enables recording of the songs of several
albums onto a single CD-R.)
DSP effects for simulating acoustics of various
performance environments (Page 24)
Provides ability to simulate the sensation of
various performance environments for
matching to the genre and source of a song.
12
Selection and display of favorite wallpaper
(screen backgrounds) (Page 32)
Wallpaper of your choice can be switched and
displayed for use as the background of the
information screen and audio playback
screens.
The screen from a navigation unit can also be
linked and selected.
● Setting wallpaper for the information screen and
audio operations screen
Radio tuner for receiving various broadcasts
• AM/FM tuner (Page 38)
Enables reception of analog AM/FM radio
broadcasts.
● AM radio operation screen
• HD RADIO (IBOC) tuner (Page 43)
Enables reception of HD RADIO (High
Definition Radio) broadcasts.
Introduction
● HD RADIO (IBOC) AM operation screen
13
Introduction
Features
• SIRIUS tuner (Page 46)
SIRIUS is a satellite broadcasting service
offering music, news, sports and other
programming with CD-quality sound; it is
available on paying a subscription.
System additions
• CD changer (Page 62)
A CD changer enables non-stop playing of
multiple discs, for convenience at times
such as taking a long drive.
It is easy to search for and play a song from
among the discs on a changer.
● SIRIUS operation screen
• VTR (Page 90)
Connecting a VTR deck enables watching
of video tapes.
Easy-access audio controls on the steering wheel
(Page 92)
You can select the radio channel and perform CD and DVD operations using the easyaccess switches on the steering wheel. (This function is only available on vehicles fitted with
steering wheel switches.)
14
Introduction
Before using the deck
• Be very careful and pay full attention to safety when
operating the audio controls while driving, otherwise
accidents may occur. Also be sure to set volume so that
you can still adequately hear sounds outside the vehicle.
Improper use can contribute to occurrence of a traffic
accident.
• Never continue to use the system if it is malfunctioning in
any way. If smoke, abnormal noises or abnormal odors
are noticed, turn off the power immediately.
Immediately turn off audio in such situations.
• Exercise caution as to the temperature inside the vehicle.
The temperature inside the vehicle can increase during
hot weather. Wait for the temperature inside the vehicle to
drop before using the unit.
Damage could result.
Introduction
• Do not disassemble or modify the deck.
The deck has a precisely designed structure, so consult
your retailer in the event of any unsatisfactory
performance.
15
Introduction
Before using the deck
• Do not apply excessive force to the monitor.
Damage could result.
• Do not place items such as cups or cans on top of the
monitor, and do not leave the monitor tilted down when
not in use.
Damage could result.
• Do not insert any objects other than discs into the disc
slot.
Damage could result.
16
• Be careful not to get fingers or other objects behind
monitor when it is being retracted into place.
Interference can cause an injury or damage the deck.
• When removing a disc from the deck, remove it in the
horizontally level direction.
Do not pull them up forcibly or press down on them
strongly while removing them.
Improper removal can scratch the disc, cause deck noise
or result in other damage.
About discs
• Water droplets can form on the inside of the unit during cold or rainy weather in
the same way car windows can fog up. (This is condensation.) When this
happens, the audio can jump and playback can stop, so ventilate or dehumidify
the vehicle for a short time before operating the equipment.
• To safeguard the components of the player, the unit will automatically stop when
a malfunction occurs. If the player will not operate even when messages
displayed on the screen are followed, consult with your equipment retailer
because it is possible that the unit has been damaged.
• It is possible that the sound will skip if the vehicle experiences violent motion on
rough roads.
About playable discs
• An audio disc or DVD video disc bearing one of the marks below can be played.
When using DVDR/RW (DVD-Recordable/ReWritable) and DVD+R/RW
(DVD+Recordable/ReWritable) discs, note that only those whose contents were
recorded in the video mode can be played. Discs whose contents were
recorded in the video recording (VR) mode cannot be played.
TEXT
• Discs that are compatible with Dolby Digital and bear the indication below can
be used.
Manufactured under license from Dolby Laboratories, Inc. "Dolby" and the double-D symbol are
trademarks of Dolby Laboratories.
• It is possible that a CD-R (CD-Recordable) or CD-RW (CD-ReWritable) disc will
not play on the unit due to the circumstances of the recording, special disc
characteristics, scratches, dirt or deterioration caused by long storage in the
vehicle. In addition, a CD-R or CD-RW disc written with CD-R, CD-RW or UDF
format that has not been finalized will not play on the unit.
• It is possible that a DVD-R/RW (DVD-Recordable/ReWritable) or DVD+R/RW
(DVD+Recordable/ReWritable) disc will not play on the unit due to the
circumstances of the recording, special disc characteristics, scratches, dirt or
deterioration caused by long storage in the vehicle. DVDR/RW or DVD+R/RW
discs that have not been finalized will not play on the unit. It may not be possible
to play a disc that has been recorded on a personal computer, depending on the
application setting and the environment.
• The CD-TEXT function can be used only with the CD-TEXT-compatible compact
discs available on the market. If it is used with CD-R or CD-RW discs,
characters may not be displayed normally.
• Do not use discs with transparent or semi-transparent portions within the
recording area, or C-thru discs, since they may not be accepted and ejected
properly and may not play properly.
Introduction
17
Introduction
Before using the deck
About handling discs
• Be sure to store discs in their cases and keep them out of
direct sunlight. Discs can warp and become unusable.
• Do not apply paper-based tape to either the recording
side or label side of a disc. Damage could result.
• Do not use discs on which there are cracks or large
warps. Damage could result.
• Do not touch the recorded side of a disc when handling it.
(This is the side with the rainbow-colored reflection.) The
disc may become dirty and that could cause sound
jumping.
18
Rough Edges
Ballpoint pen
• Using a disc that has become dirty can scratch the disc
and result in sound jumping. Use a commercially
available compact disc cleaner to clean a CD, wiping
lightly from the center to the edge.
About new discs
• You may notice that some brand new discs are rough
around the center hole or outside edge. Remove the
rough edges with the side of a ballpoint pen, etc. Flakes
from the rough edges may stick to the recorded surface
and interfere with playback.
About rental discs
Cellophane tape
Recorded surface
• Do not use CD discs with attached cellophane tape,
rental CD discs with glue protruding from labels or discs
with the residue of peeled adhesives. Using discs with
those conditions can prevent the player from properly
opening and closing as well as cause other damage.
About specially shaped discs
• Specially-shaped or octagonal CDs, like heart-shaped
cannot be played. Do not attempt to play them, even with
an adapter, since they may damage the player.
• Please do not use a commercially available lens cleaner
because it may cause damage to the pickup of the player.
About disc accessories
• Do not use accessories (stabilizers, protective seals,
laser lens cleaners, etc.) sold for "improving sound
performance" or "protecting CDs." The changes in CD
thickness or outside dimensions made by these
accessories may cause problems in the player.
CD ring
• Please be sure NOT to attach any ring-shape protector (or
other accessory) to your discs. Those protectors are
commercially available and said to protect discs and to
improve sound quality (and antivibration effect), but they
can do more harm than good in regular uses. The most
common problems are Insert/Eject related problems and
"No playback" problems due to the protector ring that may
come off in the disc mechanism.
Introduction
About the LCD panel
• The LCD panel can appear to be white or black when seen from certain angles.
• The screen will be difficult to read when external light such as sunlight falls on
the display.
19
Basic operation
Switching the mode
The deck can be used when the vehicle's ignition switch is on or in the ACC position.
• This deck supports use of a remote control. The optional remote control is sold separately
and can be purchased at your local retailer. Refer to page 94 for instructions on operation
of the remote control.
Switching the mode
Press .
• The AUDIO MENU screen will be displayed.
Touch .
• The various audio modes can be
• When the navigation screen is being
(SOURCE) MENU
FM
selected by touching the
corresponding touch switches.
displayed before pressing
(SOURCE) MENU
mode will be displayed on-screen over
the background.
, the selected
Displaying operation screen
On-screen display
Press .
20
CONT
Basic operation
● AM
● FM
Operation screen of each mode
The operation screen for each mode will appear as shown below.
radio operation screen
radio operation screen
● CD player operation screen● MP3 player operation screen
● DVD player operation screen
● SIRIUS operation screen (optional)
● HD RADIO (IBOC) operation screen
● CD changer operation screen (optional)
Basic
operation
● VTR operation screen (optional)
When the operation screen for DVD or video (VTR) has not been operated for 6 seconds or
more, the operation screen will automatically be canceled.
21
Basic operation
Adjusting the volume
Adjusting main volume
Press the VOLUME switch.
Pressing will increase volume.
Pressing will decrease volume.
• Each press of the switch will change
the volume by two steps. When the
volume reaches 50 or higher, the
switch will change the volume by one
step. Holding the switch will continue
to change the volume.
VOLUME switch
22
Basic operation
Adjusting sound quality
To adjust sound quality, touch the DSP, EQ or POS switch while the operation screen for a
mode is displayed. Adjustments made in any mode will be saved and applied to all modes.
DSPEQ
POS
Basic
operation
In the DVD mode, display the sound quality adjustment switches by pressing
from the operation modes, and then . In the VTR mode display them
either by pressing or by touching the screen.
CONT
SET
23
Basic operation
Adjusting sound quality
Setting DSP (acoustics)
The DSP function reproduces the sensation of various factory set performance environments
by adding reverberation to the music being played.
DSP mode setting
Touching the DSP touch switch
brings up the acoustics mode
screen as shown.
• After making settings, touch .
The acoustics mode adjustments will
be saved and the system will return to
the previous operation screen.
The factory set DSP (acoustics) level for each mode can be adjusted to preference and
saved.
Touch or at the right of the
screen while in the acoustics mode
to be adjusted.
• There are five + side and five - side
adjustment levels available.
Touch the switch for the acoustics
mode that has been adjusted until
a beep is heard.
24
Resetting DSP (acoustics) levels
Default settings for the currently adjusted and saved DSP (acoustics) level can be reset.
Touch until a beep is heard.
• The acoustics level will be returned to default value.
OFF
• Only has a default value of +5, in order to increase the sound
• When adjusting the level for the currently selected DSP (acoustics) mode, the
THEATER
effects of products such as DVD videos.
level will not be saved for other acoustics modes.
Basic
operation
25
Basic operation
Adjusting sound quality
Adjusting EQ (equalizer)
Adjusts sound quality to preferred characteristics according to the music genre and audio
source.
Setting sound quality
Each factory set equalizer pattern can be selected and adjusted to preference.
Touching the touch switch brings
up the equalizer mode screen as
shown in the table.
• After making settings, touch .
The equalizer mode adjustments will
be saved and the system will return to
the previous operation screen.
Tou ch sw it chEqualizer mode types
FLAT
EQ1
EQ2
EQ3
EQ4
EQ5
No EQ correction
Effective pattern for POPS
Effective pattern for ROCK
Effective pattern for JAZZ
Effective pattern for CLASSIC
Effective pattern for VOCAL
BACK
26
The default setting is .
EQ3
Adjusting and saving equalizer (EQ) patterns
Apart from these preset equalizer patterns, you can adjust and record other equalizer
patterns to suit your own sound preferences.
Touch the screen and slowly draw
the image of the preferred
equalizer curve with your finger.
To make fine adjustments, touch
the switch for the frequency to be
adjusted.
Touch or at the right of the
screen to adjust.
Basic
operation
Choose from touch switches to for saving the settings and then
touch and hold the switch until a beep is heard.
• The saved equalizer curve can be used for other settings.
• After making settings, touch . The equalizer mode adjustments will be saved
and the system will return to the previous operation screen.
EQ1EQ5
BACK
Resetting EQ patterns
Currently saved equalizer patterns and factory set equalizer patterns can be returned to the
default values.
Touch until a beep is
heard.
• The equalizer pattern will be reset to
FLAT
default values.
The default setting is .
EQ3
27
Basic operation
Adjusting sound quality
Setting POS (position selector)
The stereophonic position for obtaining optimum acoustic effects can be adjusted to match
the number and position of passengers.
In addition, front-to-back, right-to-left volume balance can be adjusted for the selected
position.
Touching the image of a seat
shown on the setting screen
will change the position.
• The selected position will change its
color to orange. Touching the seat
again will cancel the selection. The
four positions shown by the table
below can be set.
• Touching will cancel all settings.
• After making settings, touch . The position will be saved and the system will
return to the previous operation screen.
POS
OFF
BACK
Touch switchFunctionTouch switchFunction
Acoustics optimized for
driver's seat
Acoustics optimized for
passenger's seat
• This setting cannot be done at the same time as adjustment of the volume
balance (see next page).
• This product is configured for vehicles with a left-side driver's position.
28
Acoustics optimized for
both front seats
Acoustics optimized for
rear seats
Adjusting volume balance
The set position for front-to-back, right-to-left volume balance can be adjusted.
Touch on the
BAL FAD
POSITION setting screen to
display the volume balance
adjustment screen.
Touch the screen at the preferred
balance point.
• To make fine adjustments, touch ,
, , .
• Touching will set the
volume balance to the center position.
• After making settings, touch .
• The set volume balance will be saved
and the system will return to the
previous operation screen.
• To set the position again, touch
and repeat the steps above.
• Adjustments to volume balance and
position are saved separately.
Activating each position and then
displaying volume balance adjustment
screen will show the volume balance
for each position.
CENTER
BACK
POS
Basic
operation
• This setting cannot be done at the same time as POS (position selector)
adjustment, described on the previous page.
• Touching and holding , , or while making fine adjustments will
adjust values in a continuous action. However, adjustment will lock when it
reaches the center value, and , , or must be pressed again to
continue adjustment.
29
Loading...
+ 92 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.