Eclipse - Fujitsu Ten AVN52D User Manual

Contents
Contents
Components
Installation Diagram
Before
installation
Installation
Connections
2
5
Names and functions of terminals 6
Installing the GPS antenna Installing the main unit
13 16
DVD Navigation System with 7" Wide TFT Display and DVD Multi-Source Receiver
INSTALLATION MANUAL
Connecting the vehicle speed pulse, parking brake, and reverse wires
10
System connection example 12
MODEL
Español Français Italiano
Nederlands
SvenskaEnglish
Be sure to read this installation manual thoroughly prior to installation. If installation methods or nonstandard parts not specified in this installation manual are used, accidents or injury may result. Professional installation is required to install this system. Eclipse recommends you to have the system installed at your retailer. Be sure to keep this manual after installation for later reference. Customer should keep manual for reference.
-2-
Components
Components
Check that all of the following components are present
Check that all of the following components are present
GPS antenna components
GPS antenna
x 1
Waterproof cushion
x 1
Ground plate
x 1
Body protective sheet
x 1
When installing the main unit, some vehicle models may require the use of items that need to be obtained separately such as a power supply adaptor wire, radio antenna adaptor wire or mounting bracket.
Tip
Main unit components
Wiring components
Wire tie (for GPS antenna)
x 4
Flat head screw
(Red:M5x8) x 8
Panel
x 1
Hex-head bolt
(Red:M5x8) x 8
Splicing connector
x 3
MAP DVD-ROM
x 1
Main unit x 1
Interconnecting wires (Power and speaker wires,
etc) (16P) x 1
Interconnecting wires (Sub-woofer, line out, speed pulse, parking
brake, reverse, video out and steering remote control connector) (16P) x 1
English Español Français Italiano
Nederlands
SvenskaEnglish
Interconnecting wires
(Video input) (6P) x 1
1
4
8
2
5
9
3
6
7
10
14
11
12
13
-3-
Warnings and caution signs, illustrated below, are posted throughout this manual as well as on the AVN52D. They show safe and correct ways to handle the main unit to prevent personal injury to you and others and avoid damage to property. Before reading through the manual, take time to read through and learn the important information listed in this section.
This "Warning" sign indicates a situation in which incorrect handling may result in death or serious personal injury.
This "Caution" sign indicates a situation in which incorrect handling may result in personal injury or may result solely in damage to property.
FFor y
or y
our saf
our saf
ety in using the A
ety in using the A
VN52D
VN52D
This section contains information that can help to prevent problems and damage to the main unit, and also contain other useful information.
Tip
Never attempt to disassemble or modify the main unit. Otherwise, an accident, fire, or electric shock may result.
When installing the main unit into a vehicle with a passenger side air bag, do not secure it to the air bag's cover or in places where it may impede air bag deployment. Otherwise, proper air bag operation may not be ensured in the event of an accident, causing injury or death.
When making holes (example: drilling) be sure to wear protective eyewear. Otherwise, an injury such as loss of eyesight may result.
Exposed wires must be insulated with electrical tape. Otherwise, a short circuit, fire, or electric shock may result.
Do not modify this system for use other than that specified herein. Also, do not deviate from the installation procedures described herein; Eclipse will not be held liable for damages including, but not limited to serious injury, death, or property damage resulting from installations that enable unintended operation.
This main unit is intended for operation in DC 12-volt, negative-grounded vehicles only. Never use it in 24­volt vehicles such as heavy trucks or diesel vehicle with cold-region specifications.
Do not install this main unit in locations where it may obstruct the driver's view, or where it may endanger passengers in the vehicle. Otherwise, an accident or injury may result.
To prevent damage to the vehicle, confirm the locations of hoses, electrical wiring, and the fuel tank prior to drilling holes to install this main unit. Also, take precautions so that the main unit does not interfere, nor come in contact with them. Otherwise, a fire may result.
When installing this main unit, never use the existing nuts or bolts that secure parts of the fuel tank, or the steering, or braking systems. Otherwise, improper steering, or braking or a fire may result.
To prevent a short circuit from occurring, disconnect the battery's negative terminal before installing this main unit. Otherwise, an electric shock or injury may result.
When using an existing nut and/or bolt from the vehicle to ground this main unit, do not use any that secure parts of the steering or braking systems. Otherwise, an accident may result.
Bundle wires and harnesses with electrical tape or wire ties to prevent them from interfering with moving parts. If they should entangle with the steering wheel, shift lever, or brake pedal, an accident may result.
Never supply power to another electrical appliance by splicing or tapping into this main unit's power wire. Otherwise, the current capacity of the wire will be exceeded, resulting in a fire or electric shock.
Español Français Italiano
Nederlands
SvenskaEnglish
-4-
This main unit must be operated only as on-board main unit, or it may cause electrical shock or injury.
Do not play distorted sounds for long periods of time; the speakers may overheat and cause a fire.
Once installation and wiring have been completed, return the brakes and electrical equipment such as lights, horn, hazard warning lights and turn signal lights to their original places, and check that they operate correctly. If you use the vehicle while any of this equipment is not working correctly, fire, electric shocks or accidents may occur.
Use supplied wire harness with this main unit. Other manufacturers may use a similar wire harness connector but pin configurations are incorrect for use with Eclipse main units and can damage the main unit. Prior to powering up the main unit, please make sure the main unit is properly grounded with the vehicle chassis. If no ground is available to the chassis, add a ground strap from the main unit to the vehicle chassis to improve the ground.
Do not use with speakers having 1 to 3 ohms impedance. This main unit is designed to be used with high-powered speakers rated above 50 W with impedance rating between 4 and 8 ohms.
For best results, this main unit should be installed by a professional installer. Contact the dealer whom you purchased the main unit for an appointment.
When installing this main unit, be sure to use the supplied mounting hardware. If parts other than those supplied are used, the main unit may be damaged internally, or may not be held in place securely and become dislodged.
Avoid installing this main unit in places where it may get wet, such as near windows, or in places that are moist or dusty. Presence of liquid, moisture, or dust inside this main unit can cause short circuiting resulting in smoke or fire.
If this main unit is not connected properly, a short circuit, fire, or accident may occur.
When routing wires, use precautions to prevent contact of sharp metal parts such as brackets or screw tips. Otherwise, a short circuit, electric shock, fire, or accident may result.
Play the audio at a moderate volume level that permits you to hear sounds from outside the vehicle. Driving without being able to hear outside sounds may result in an accident.
Do not operate the main unit in a malfunctioning condition, for instance, when the audio does not play. Doing so may result in an accident, fire, or electrical shock.
If an abnormal situation occurs, such as foreign matter entering or liquid splashing on the main unit, or smoke or a strange odor emitting from the main unit, shut off the main unit immediately and consult the dealer from whom you purchased it. Continued operation may cause an accident, fire, or electrical shock.
Do not place the vinyl storage bag over a person's head. It may cause a serious accident or death by suffocation.
Do not disassemble or rebuild this main unit. Doing so may cause an accident, fire, or electrical shock.
When it is necessary to replace the fuse, always use a fuse of the correct rating (number of amperes). Use of fuses with higher amperage ratings may cause a fire.
English Español Français Italiano
Nederlands
SvenskaEnglish
-5-
Installation Diag
Installation Diagrr
am
am
GPS antenna (When installing inside the vehicle)
10
GPS antenna (When installing outside the vehicle)
10
If installing the GPS antenna inside the vehicle, the location and the slope of the vehicle's windshield will determine the accuracy of the GPS antenna to receive the GPS signal. If the GPS antenna location inside the vehicle is hindering the accuracy of the GPS antenna, then you may want to install the antenna outside of the vehicle.
The materials used in front and rear vehicle windows can cause GPS reception sensitivity to drop significantly. If this happens, install the GPS antenna on the outside of the vehicle.
Tip
Tip
Main unit
1
Español Français Italiano
Nederlands
SvenskaEnglish
Loading...
+ 11 hidden pages