Eclipse - Fujitsu Ten avn 2454 User Manual
Be sure to read this installation manual thoroughly before carrying out installation and making
connections. If installation methods or non-standard parts that are not specified in this installation
manual are used, accidents or injury may result.
Professional installation is recommended, contact the place of purchase to schedule an appointment.
After reading the owner's manual and the installation manual thoroughly, keep them in a safe place for
later reference.
To dealers:
Give this installation manual to the customer after installation and connections have been completed.
Contents
Contents
Components
Installation Diagram
Before
installation
Installation
Connections
2
For your safety in using the AVN2454 3
5
Names and functions of terminals 6
Installing the GPS antenna
Installing the main unit
13
16
6.5" Wide TFT Touch-Panel Display CD / DVD Multi-Source Receiver with DVD NAVIGATION
INSTALLATION MANUAL
Connecting the vehicle speed pulse signal, parking brake signal cable and reverse cable
9
System connection example 12
by FUJITSU TEN
MODEL
Components
Components
Check that all of the following components are present
Check that all of the following components are present
-2-
GPS antenna components
MAP DVD-ROM x 1
GPS antenna
x 1
Waterproof cushion
x 1
Ground plate
x 1
Body protective sheet
x 1
Interconnecting cable
(Rear speaker connector)
(6P) x 1
Interconnecting cable
(Speed pulse parking brake and
reverse signal connector)
(5P) x 1
Main unit x 1
Wiring components
Clamp
(for GPS antenna) x 3
Cable tie
(for GPS antenna) x 4
Harness fixing tape
x 2
When installing the main unit, some vehicle models may require the use of items that need to be
obtained separately such as a power supply adaptor cable, radio antenna adaptor cable or mounting
bracket.
Tip
Interconnecting cable
(Power and front speaker connector)
(10P) x 1
Main unit components
Hex-head bolt
(M5x8) x 8
Flathead screw
(M5x8) x 8
Splicing connector
x 3
Antenna
extension cable x 1
Interconnecting cable
(Video input connector)
(6P) x 1
1
5
10
2
6
7
3
8
4
9
11
12
13
14
15
16
17
-3-
Warnings and caution signs, illustrated bellow, are posted throughout this manual as well as on the
AVN2454. They show safe and correct ways to handle the product so as to prevent personal injury to you
and others and avoid damage to property.
Before reading through the manual, take time to read through and learn the important information listed in
this section.
This sign indicates a situation in which incorrect handling through disregard
of a
sign
might result in death or serious personal injury.
This sign indicates a situation in which incorrect handling through disregard of a sign
might result in personal injury or may result solely in damage to property.
FFor y
or y
our saf
our saf
ety in using the A
ety in using the A
VN2454
VN2454
This section contains information that can help to prevent problems and
damage to the unit, and also contain other useful information.
Tip
•
Never supply power to another electrical appliance
by splicing or tapping into this product's power lead
(wire). Otherwise, the current capacity of the wire will
be exceeded, resulting in a fire or electric shock.
•
Never attempt to disassemble or modify the product.
Otherwise, an accident, fire or electric shock may
result.
•
When replacing fuses, be sure to use fuses of the
specified capacity (amperage). Otherwise, damage
to the unit, fire or an electric shock may result.
•
When installing the product into a vehicle with a
passenger side air bag, do not secure it to the air
bag's cover or in places where it may impede air bag
deployment. Otherwise, proper air bag operation may
not be ensured in the event of an accident, causing
injury or death.
•
When making holes using drill or similar tool, be sure
to wear protective eyewear. Otherwise, an injury
such as loss of eyesight may result.
•
Exposed wires must be insulated with electrical tape.
Otherwise, a short circuit, fire, or electric shock may
result.
•
Do not modify this system for use other than that
specified herein. Also, do not deviate from the
installation procedures described herein; Eclipse will
not be held liable for damages including, but not
limited to serious injury, death or property damage
resulting from installations that enable unintended
operation.
•
Do not install this product in locations where it may
obstruct the driver's view, or where it may endanger
passengers in the vehicle. Otherwise, an accident or
injury may result.
•
Do not install this product in locations where it may
interfere with the operation of the steering wheel,
shift lever, brake pedal, etc. Otherwise, an accident
or injury may result.
•
To prevent damage to the vehicle, confirm the
locations of hoses, electrical wiring, and the fuel tank
prior to drilling holes to install this product. Also, take
care so that the product does not interfere, nor come
in contact with them. Otherwise, a fire may result.
•
When installing this product, never use the existing
nuts or bolts that secure parts of the fuel tank, or the
steering or braking systems. Otherwise, improper
steering or braking or a fire may result.
•
To prevent a short circuit from occurring, disconnect
the battery's negative terminal before installing this
product. Otherwise, an electric shock or injury may
result.
•
When using an existing nut and/or bolt from the
vehicle to ground this product, do not use any that
secure parts of the steering or braking systems.
Otherwise, an accident may result.
•
Bundle cables and harnesses with electrical tape or
wire ties to prevent them from interfering with moving
parts. If they should entangle with the steering wheel,
shift lever or brake pedal, an accident may result.
-4-
•
When routing cables, use care so that they do not
contact sharp metal parts such as brackets or screw
tips. Otherwise, a short circuit, electric shock, fire or
accident may result.
•
Play the audio at a moderate volume level that
permits you to hear sounds from outside the car.
Driving without being able to hear outside sounds
may result in an accident.
•
This product must be operated only as on-board
equipment, or it may cause electrical shock or injury.
•
Do not play distorted sounds for long periods of time;
the speakers may overheat and cause a fire.
•
For best results, this product should be installed by a
professional installer.
Contact the dealer whom you purchased the product
for an appointment.
•
When installing this product, be sure to use the
supplied mounting hardware. If parts other than
those supplied are used, the unit may be damaged
internally, or may not be held in place securely and
become dislodged.
•
Avoid installing this product in places where it may
get wet, such as near windows, or in places that are
moist or dusty. Presence of liquid, moisture or dust
inside this product can cause short circuiting
resulting in smoke or fire.
•
If this product is not connected properly, a short
circuit, fire or accident may occur.
•
Do not operate the product in a malfunctioning
condition, for instance, when the audio does not play.
Doing so may result in an accident, fire or electrical
shock.
•
If an abnormal situation occurs, such as foreign
matter entering or liquid splashing on the product, or
smoke or a strange odor emitting from the unit, shut
off the product immediately and consult the dealer
from whom you purchased it. Continued operation
may cause an accident, fire or electrical shock.
•
This unit is intended for operation in DC 12volt,
negative-grounded vehicles only. Never use it in 24volt vehicles such as heavy trucks or diesel cars with
cold-region specifications.
•
Do not place the vinyl storage bag over a person. It
may cause a serious accident or death by
suffocation.
•
Do not disassemble or rebuild this product. Doing so
may cause an accident, fire or electrical shock.
•
When it is necessary to replace the fuse, always use
a fuse of the correct rating (number of amperes). Use
of fuses with higher amperage ratings may cause a
fire.
-5-
Installation Diag
Installation Diagrr
am
am
GPS antenna
(When installing inside the vehicle)
11
GPS antenna
(When installing outside the vehicle)
11
•
If installing the GPS antenna inside the vehicle, the location and the slope of the vehicle's windshield
will determine the accuracy of the GPS antenna to receive the GPS signal. If this occurs you may want
to install the antenna outside of the vehicle.
•
The materials used in front and rear vehicle windows can cause GPS reception sensitivity to drop
significantly. If this happens, install the GPS antenna to the outside of the vehicle.
Tip
Tip
Main unit
1
Loading...