Eclipse - Fujitsu Ten 180 User Manual

Eclipse 180 User’s Manual
Congratulations on purchasing your Eclipse Personal Media Player!
To get the most out of your purchase, please take the time to carefully
read through this manual.

Foreword

If any problems occur during while using your Eclipse, please feel free to contact Mach Speed technical support at 580-272-0035. Thank
you for your support and cooperation!
Mach Speed Technologies bears no responsibility for any damage or loss of personal data due to misuse of software and/or hardware,
damage to the player caused by human factors, replacement of battery, or other unforeseen circumstances. To prevent loss of your data, please
Information in the manual is subject to any change without notice and is subject to copyright protection. Copying or otherwise reproducing
this material without prior written consent is prohibited.
Due to Firmware changes, some of the pictures and functions described in this manual may not be the same as are included with your
player.

Precautions

If you do not use your Eclipse for over 24 hours, please switch it to OFF.
Avoid using your Eclipse under extremely hot, cold, dusty or wet environments.
Striking, dropping, or severe jolts to your Eclipse may cause physical damage, battery loosening, or other hardware damage.
The following conditions indicates a low battery level and signifies that the player should be charged:
o
The battery icon displays in normal operation with low battery prompt.
o
Where there is no response when pressing keys and the battery icon displays .
o
The player turns off automatically.
Static electricity may cause damage to interior hardware of the player.
Do not disconnect the player while formatting, uploading, or downloading files to the player, as it may cause program errors, or
cause the unit to be unable to power on.
When the player is used as a removable hard disk, users should store files following correct file management methods. We are not
liable for any data loss or damage.
Do not disassemble the unit in any way as this will void all warranties. Please contact your place of purchase if you experience any
problems with your unit.
Features
1.8 inch color display
Built in video player, supporting AMV video files
High Speed USB 2.0 for fast file transfer
ID3 support, Lyrics display
Digital Voice recording
Multiple play modes so that you can listen to your music the way that you want
Seven Equalizer modes to listen to your music the way it was meant to be heard
No drivers required for Windows ME or later operating systems
Built-in rechargeable Lithium ion battery
Buttons
Basic operations
1) Power on: Set the ON/OFF switch to the ON position, and press and hold the [>II] (play/stop) button for 3 seconds.
2) Power off: Press and hold the [>II] (play/stop) button for 5 seconds, until the player powers off. You can then set the ON/OFF switch to the
OFF position.
Note: When battery power is low, the player will automatically power off.
3) Adjusting volume: In Music, Voice, or Movie modes, press the [VOL] button, then press [NEXT] or [PREV] button to decrease/increase the
volume.
4) Charging: Set the ON/OFF switch to the ON position and connect the player to your computer’s USB port.
Main menu
The main menu allows you to access the different modes of your player. You can access the main menu at any time by pressing and holding the
[Menu] button. Use the [NEXT] and [PREV] buttons to navigate, and press the [MENU] button to make a selection.
text
The text function allows you to read .TXT files you have loaded to your player. To access text mode, use the [PREV] or [NEXT] buttons to select
“text” on the main menu and press [MENU].
When you first enter the text reader, a list of the files on your player will be displayed. Use [PREV] and [NEXT] to highlight the file you would like
to view, press [MENU] to enter the file submenu. While viewing files, press [PREV] or [NEXT] to flip to the previous or next page respectively.
NOTE- The text screen displays 20 characters per line, including spaces, and 9 lines per page. Please keep this in mind when creating a .TXT
file to be viewed on this player.
File Submenu
The file submenu allows you to manipulate the files and how they are viewed
Local Folder- Allows you to access your file files if they are in a different location. Use [PREV] and [NEXT] to select a file and press [PLAY] to
begin viewing that file. If the file is in a folder, you will see “/” at the top of the screen, select this and press [MENU] to leave the current folder
and go up one folder level.
Playback Set- Allows you to set up a slideshow. Manual is the default setting, where you must use [PREV] or [NEXT] to flip to the previous or
next page. Auto is a slideshow setting. Once you have selected Auto, use [PREV] or [NEXT] to select the timer between pages, from 2 seconds
to 10 seconds.
Delete File- Allows you to delete a file file.
Delete All- Allows you to delete all the file files.
Exit- Return to your files.
Browser
To access Browser mode, use the [PREV] or [NEXT] buttons to select “Browser” on the main menu and press [MENU].
you will enter your media Library, which allows you to select the file you wish to view. This mode will allows you to access all files on the player.
Pictures will open in picture viewer, songs in the music mode, etc.
Setting
Setting allows you to customize your player. To access Setting, use the [PREV] or [NEXT] buttons to select “Setting” on the main menu and
press [MENU].
When in setting, press the [MENU] button to return to the main menu. Use [PREV] or [NEXT] to highlight an item and press [MENU] to select it.
Setting Menu
LCD set- Allows you to adjust several LCD settings
o
Dark mode- allows you to set the length of time before the screen powers off to conserve battery life (0 disables dark mode)
Language- Allows you to select the display language
Power Off- Allows you to set the length of time before the player powers off (measured in minutes, 0 disables)
Replay Mode- Allows you to set manual or Auto play. When in manual, you will have to use [NEXT] or [PREV] to advance to the next or
previous file in music, movie or photo mode.
Firmware version- Displays the current firmware version and date
Battery charge-when the unit in charging ,the player will in start charge atomically. If do not want to charge, choose stop charge.
Exit- Return to the main menu.
Tools
To access Tools mode, use the [PREV] or [NEXT] buttons to select “Tools” on the main menu and press [MENU].
Set calendar—Press [MENU] to enter, press [PREV] or [NEXT] to choose date .
System time---- - Allows you to set the system time. This is used to create a timestamp on voice recordings. Press [PLAY] to move from
item to item and use [PREV] and [NEXT] to adjust those items. Press [MENU] once you have set the time to return to the setup menu.
Stopwatch---Allows you to record the time. Press [MENU] to enter. Press PLAY to start and pause. you can record 5 times and use the
[REV] or NEXT] to choose one to five.
Firmware upgrade- used to update the firmware. We recommend this setting only for advanced users
Memory info- Displays how much memory on the player has been used, and how much is available.
Music
Music mode allows you to listen to your music files. To access music mode, use the [PREV] or [NEXT] buttons to select “Music” on the main
menu and press [MENU].
NOTE- To return to the main menu, you must pause the music before holding the [MENU] button
When in the music mode, the player will display the first song you have loaded on the player. To begin playing music, press the [PLAY] button
once. To pause the song, press the [PLAY] button again. You can quickly press the [PREV] or [NEXT] button to skip to the previous or next
track. To rewind or fast forward, press and hold the [PREV] or [NEXT] buttons.
.
Now Playing—it shows the song what you are listen
Local Folder- Allows you to select files. Use [PREV] and [NEXT] to select a file and press [MENU] to begin playing that file. If the music is
in a folder, you will see “/” at the top of the screen, select this and press [MENU] to leave the current folder and go up one folder level.
Setting---- Repeat- Repeat allows you to adjust the play mode. Select from Normal, Repeat One, Folder, Repeat Folder, Repeat all, shuffle,
Intro and Folder mode.
Loading...
+ 9 hidden pages