Eclipse ECL-VIP200 User Manual
i
2-Wire ECL-VIP200 User’s Manual
V1.0.0
i
Table of Contents
Table of Contents .....................................................................................................................i
1
Product Overview ....................................................................................................... 1
1.1 List of Models ................................................................................................................. 1
1.2 Structure ........................................................................................................................ 1
1.2.1 Dimension ........................................................................................................... 1
1.2.2 Front Panel ......................................................................................................... 2
1.2.3 Rear Panel ........................................................................................................... 3
1.3 System Networking ........................................................................................................ 3
1.3.1 One-to-One Scene .............................................................................................. 4
1.3.2 Group Call Scene ................................................................................................. 4
2
Install VTO .................................................................................................................. 5
2.1 Direct Installation ........................................................................................................... 5
2.1.1 Screw .................................................................................................................. 5
2.1.2 Dimension ........................................................................................................... 6
2.1.3 Installation Step .................................................................................................. 6
2.2 Embedded in Wall .......................................................................................................... 8
2.2.1 Screw .................................................................................................................. 8
2.2.2 Dimension ........................................................................................................... 8
2.2.3 Installation Step .................................................................................................. 9
2.3 Wiring ........................................................................................................................... 11
2.4 Electric Control Lock and Electromagnetic Lock .......................................................... 11
2.4.1 Electric Control Lock ......................................................................................... 11
2.4.2 Electromagnetic Lock ........................................................................................ 12
3
Installation Debugging ............................................................................................. 13
3.1 WEB Setup .................................................................................................................... 13
ii
3.2 General Config ............................................................................................................. 14
4
Web Config ............................................................................................................... 16
4.1 System Config ............................................................................................................... 16
4.1.1 Local Config ....................................................................................................... 16
4.1.2 LAN Config ........................................................................................................ 17
4.1.3 Indoor Manager ................................................................................................ 17
4.1.4 Network Config ................................................................................................. 19
4.1.5 Video Set ........................................................................................................... 19
4.1.6 User Manage..................................................................................................... 20
4.2 Info Search ................................................................................................................... 21
4.2.1 Call History ........................................................................................................ 21
4.2.2 Alarm Record .................................................................................................... 22
4.3 Status Statistics ............................................................................................................ 22
4.3.1 VTH Status ........................................................................................................ 22
4.4 Logout .......................................................................................................................... 22
5
Basic Function Introduction ..................................................................................... 23
5.1 Call Function ................................................................................................................. 23
5.1.1 Call Manager Center ......................................................................................... 23
5.1.2 Call User ............................................................................................................ 24
5.1.3 Group Call ......................................................................................................... 24
5.2 Monitor ........................................................................................................................ 27
5.3 Unlock Function ........................................................................................................... 27
5.4 Compensation of Light ................................................................................................. 28
5.5 Vandal Proof................................................................................................................. 28
5.6 Restore Backup ............................................................................................................ 28
6
FAQ ........................................................................................................................... 29
Appendix 1 Technical Specifications ....................................................................................... 30
Appendix 2 Technical Specifications ....................................................................................... 31
Appendix 2.1 Cable Specification ............................................................................................ 31
Appendix 2.2 Power Extension Line Specification ................................................................... 31
iii
Appendix 2.3 Embedded Box .................................................................................................. 31
Appendix 3 VTMS .................................................................................................................... 32
Appendix 4 VTMS Client .......................................................................................................... 34
Appendix 4.1 Config Network Address .................................................................................... 34
Appendix 4.2 Create Organization .......................................................................................... 36
iv
Important Safeguards and Warnings
Please read the following safeguards and warnings carefully before using the product in
order to avoid damages and losses.
Note:
Do not expose the device to lampblack, steam or dust. Otherwise it may cause fire or
electric shock.
Do not install the device at position exposed to sunlight or in high temperature.
Temperature rise in device may cause fire.
Do not expose the device to humid environment. Otherwise it may cause fire.
The device must be installed on solid and flat surface in order to guarantee safety
under load and earthquake. Otherwise, it may cause device to fall off or turnover.
Do not place the device on carpet or quilt.
Do not block air vent of the device or ventilation around the device. Otherwise,
temperature in device will rise and may cause fire.
Do not place any object on the device.
Do not disassemble the device without professional instruction.
Warning:
Please use battery properly to avoid fire, explosion and other dangers.
Please replace used battery with battery of the same type.
Do not use power line other than the one specified. Please use it properly. Otherwise,
it may cause fire or electric shock.
Special Announcement
This manual is for reference only.
All the designs and software here are subject to change without prior written notice.
All trademarks and registered trademarks are the properties of their respective
owners.
If there is any uncertainty or controversy, please refer to the final explanation of us.
Please visit our website for more information.
1
1 Product Overview
1.1 List of Models
Model Chassis
Material
Color Unlock via
IC card
Button Type Lock Control Module
ECL-VIP200 Metal Silver N/A Mechanical
key
Built-in
1.2 Structure
1.2.1 Dimension
Before you install the device, please make sure you know the dimension of device and
select appropriate installation method. See Figure 1- 1.
Figure 1- 1
2
1.2.2 Front Panel
Figure 1- 2
No. Port Name Note
1
MIC Audio input.
2
Camera It monitors corresponding door region.
3
Compensation
Light
Light compensation will automatically turn on
during monitoring, calling, or connecting status if
there is no enough light in environment.
4
Speaker Audio output.
5
User Nameplate Display username and other info.
6
Call Button Call center or VTH.
3
1.2.3 Rear Panel
Figure 1- 3
No. Component Name Note
1
Camera Angle
Adjustment
Adjust camera angle.
2
Vandal-proof
Switch
When VTO if forced to leave wall, it will alarm and
report to MGT center.
3
User Port
Connect to lock, door sensor feedback and unlock
button.
4
Project Port Reserved for project staff use.
1.3 System Networking
This chapter mainly introduces usage of digital VTO, please read the following content
and install the device according to your actual condition.
4
1.3.1 One-to-One Scene
Visitor press Call button to call residence (as VTH) or Center. See Figure 1- 4.
Figure 1- 4
1.3.2 Group Call Scene
When visitor press Call button on VTO, multiple VTHs will ring at the same time. User can
call, hang up, and unlock on any of these VTHs.
Note:
VTH has 1 master VTH and up to 3 extension VTHs.
See Figure 1- 5.
Figure 1- 5
5
2 Install VTO
2.1 Direct Installation
2.1.1 Screw
Before installing VTH, please check screws on accessory bag according to the following
specifications and install by following this guide.
Component Name Illustration Quantity
M3×6 Hex slot pan head tail machine screws
--- galvanizing white
4
M3×8 Cross recessed countersunk head tail
machine screws --- galvanizing white
4
ST3×18 Cross recessed countersunk head
tail tapping screws --- galvanizing white
4
White expansion tube￠6×30mm
4
Chart 2- 1
Note:
M3x6 or M3x8 either is OK.
6
2.1.2 Dimension
Before you install the device, please make sure you know the dimension of device and
select appropriate installation method. See Figure 2- 1.
Figure 2- 1
2.1.3 Installation Step
Step 1. Install metal bracket into the groove on wall. At spot 1 fasten screw (ST3×18
Cross recessed countersunk head tail tapping screws --- galvanizing white), and
fix metal bracket on wall. See Figure 2- 2
Step 2. Align the device on metal bracket according to screw hole. At spot 2 fasten screw
(M3×8 Cross recessed countersunk head tail machine screws --- galvanizing
white), and fix device on metal bracket. See Figure 2- 3.
7
Figure 2- 2
Figure 2- 3
8
2.2 Embedded in Wall
2.2.1 Screw
Before installing VTH, please check screws on accessory bag according to the following
specifications and install by following this guide.
Component Illustration Quantity
M3×6 Hex slot pan head tail machine
screws--- galvanizing white
4
M3×8 Cross recessed countersunk head tail
machine screws --- galvanizing white
4
Chart 2- 2
Note:
M3x6 or M3x8 either is OK.
2.2.2 Dimension
Before you install the device, please make sure you know the dimension of device and
select appropriate installation method. See Figure 2- 4.
Figure 2- 4
Loading...