Eclipse Eclipse SS-969E Manual

SS-969 SMD Rework Station

User’s Manual

st

1

Edition, 2011

©2011 Copy Right by Prokit’s Industries Co., Ltd.

99 Washington Street
Melrose, MA 02176

Phone [phone]
Toll Free 1-800-517-8431

Visit us at www.TestEquipmentDepot.com

SAFETY INSTRU

CTIONS

WARNING
Warnings and cautions are placed at critical points in this manual to direct the
operator’s attention to significant items. They are defined as follows:
WARNING: Failure to comply with a WARNI NG may result in serious injury or
death.
CAUTION: Failure to comply with a CAUTION may result in injury to the
operator, or damage to the items involve d. Two examples are given below.

NOTE: A NOTE indicates a procedure or point that is important to the pro cess

being described.

EXAMPLE: AN EXAMPLE is given to demonstrate a particular procedure,

point or process.

Be sure to comply with following WARNINGS and CAUTIONS for your safety.

WARNING
Do not change or disassemble any components related to this product, it may
cause product damaged.
When you need to replace the fuse, be sure turn off the power before
operating.
During working period, do not turn off the power suddenly, the heat gun
should be placed on the heat gun holder until cool off after power turn off,
otherwise it will damage the product。
CAUTION

When the power is ON, the temperature of the hot air and the nozzle ranges
from 100 to 450 (212 to 842 ). To avoid injury to personnel or damage to ℃℉
items in the work area, observe the following:

** Do not direct the hot air toward personnel or touch the metal parts near the

nozzle.
** Do not use the product near combustible gases or flammable materials.
** Advise those in the work area that the unit can reach very high temperatures

and should be considered potentially dangerous.
** Turn the power OFF when no longer using the Pro’sKit SS-969 or when

leaving it unattended.

** Before replacing parts or storing the u nit, allow the unit to cool and then turn

the power OFF.

To prevent accidents and failures, be sure to take the following precautions:

1

** Do not strike the han

play

dpiece against hard surfaces or otherwise subject it to

physical shock.
** Be sure the unit is grounded. Always connect power to a grounded receptacle.
** Do not disassemble the machine.
** Do not modify the unit.
** Use Pro’sKit provides replacement parts.
** Do not wet the unit or use the unit with wet hands.
** Remove power cord by holding the plug – not the wires.
** Make sure the work area is well ventilated.
** The Pro’sKit SS-969 is not intended for use by children or infirm persons

without supervision.

** Children should be supervised to ensure that they do not play with the SS-969.

Packing list and name of parts
Name of Parts

Heat gun holder

Temperature
Dis

Heat gun

Airflow
adjustment
knob

Power

Temperature
adjustment button

Switch

Packing List：

SS-969 SMD Rework Station (include holder) x1
Heat Gun x1
Air nozzle x 3
Power cord x1
User’s manual x1

2