MA-1016MA 30PCS LED DESK TYPE MAGNIFIER LAMP USER’S MANUAL
Model no.
MA-1016MA
Light source
30PCS SMD LED
Power Consumption
5.5W
Color
6000-7000 kelvin
Lumen
around 400Lumen
Diopter
3D /12D(1.75X / 4X)
Lens material
Glass
Lens size
Φ90mm
Voltage
120VAC 60HZ
Plug Type
A type
Thank you very much for buying a Pro'sKit LED Magnifier
Lamp. This LED Magnifier Lamp can provide a clearer
view, which is very suitable for family, offices, factories and
many other important places. Please read the following
instructions before using the desk Magnifier Lamp.
Energy saving and power saving 80%
Using 30 white LED lights, the light source is bright enough,
only 5.5W power consumption, saves electricity and saves
energy, 80% compared white light bulbs.
The service life increased by 20 times to 50,000 hours
The LED lamp has 20 times longer life than the white light
bulb, and each bulb can be used up to 50,000 hours.
Low electromagnetic wave
The product is equipped with a power supply that is
smaller and lower in electromagnetic waves, which is more
environmental friendly and healthier.
3D/12D(1.75X/4X) high light transmittance glass
magnifying lens
The Φ90mm (1.75X/4X) magnifying glass lens with high
magnification is suitable for reading, observing, checking
or assembling small models.
Product specification：
Using method：
A. Before using, please remove the magnifying glass
lamp and all the packages.
B. Please put the magnifier on the flat table.
C. Plug the power plug into the appropriate power
outlet.
D. Press the ON/OFF switch and turn on the power
User safety：
A. This product is only suitable for indoor use. When
the magnifying glass is used for 30 minutes, please
rest for 5 minutes, to avoid damage to eyesight.
B. Environment temperature: -10 ~ +40 C
C. Humidity: less than 95% C.
D. Do not disassemble the magnifying glass lamp
unless you are a qualified electrical technician.
E. When you are not in use or need to repair the
magnifying glass lamp, please remove the plug.
F. Do not expose lenses to direct sunlight or wherever
light can go through unattended care, which will
constitute a danger of fire. Please cover the
lampshade with your hand.
G. If the external wire of the magnifying lamp is
damaged, to avoid danger, it should be specially
maintained by the manufacturer or his agent or
similar qualified person.
Revolving arm design and easy adjustment of use
position
The adjustable arm design is easy to adjust to any position,
and it is more convenient to use.
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
TestEquipmentDepot.com
Loading...