Eclipse 091009 Assembly Instruction Manual
ECLIPSE
Cot Model # 091009
IMPORTANT:
RETAIN FOR FUTURE REFERENCE, READ CAREFULLY
3
Due to variations in the style and design of our products, the photographs and illustrations
shown in this instruction manual are generic, therefore product fabrics, colour and
design may vary from images shown. CNP Brands reserves the right to alter product
specications without notice as a result of our ongoing policy of product improvement.
Contents
Assembly contents list
Assembly / Operating instructions
How to care for your Childcare Cot
Congratulations on your purchase of the
Childcare Eclipse Cot.
This product has been designed and developed with
safety, comfort and functionality in mind. Please take
the time to read this manual carefully before using
this product and keep it in a safe place for future
reference.
Read all instructions before assembly and use of the cot. Keep
instructions for future use. Follow the manufacturer’s assembly
instructions to ensure the safety features of the cot are not
compromised.
Safety Precautions
This cot has been manufactured for one child only, with a maximum weight of 18kgs in cot
conguration.
When the mattress base is assembled in the lower position, ensure the higher cot base holes are
covered tightly with the lling bolts supplied. This is to prevent nger entrapment, swallowing and
inhalation hazards.
Ensure the cot is placed at a reasonable distance from curtains, blinds, heaters and power points.
Ensure the cot is completely assembled and check that all parts are securely tightened before
placing the child into the cot.
Ensure medication, string, elastic, small toys or small items such as money etc are always kept out
of the child’s reach when in the cot.
Do not over tighten bolts/screws.
Ensure that the child is clear of any moving parts when adjusting the cot.
RECOMMENDED MATTRESS SIZE:
THIS COT HAS BEEN MANUFACTURED FOR USE WITH A MATTRESS WHICH MEASURES 690
MM WIDE BY 1300 MM LONG AND 100 MM-150 MM IN THICKNESS. The width and length are
specied because it is important that the gaps between the mattress and the sides and ends of the
cot will not exceed 40 mm when the mattress is pushed to one side or end, and 20mm when the
mattress is centred in the cot. This is to minimise the risk of a child’s limb becoming caught in the
gap. The thickness of the mattress has been specied to ensure that the depth of the cot is greater
than 500 mm with the mattress base in the lower position to minimise the risk of a child climbing or
falling out of the cot.
WARNING
: TO PREVENT FALLS, THE MATTRESS
BASE OF THIS COT SHOULD BE ADJUSTED TO THE
LOWEST POSITION BEFORE THE CHILD CAN SIT UP.
RECOMMENDED MATTRESS SIZE:
690 MM WIDE X 1300 MM LONG X 100 MM-150 MM THICK.
54
x2
x2
x1
x2
x8
x8
x4
x4
x2
Assembly ContentsAssembly Contents
Check what you have received...
You have received 1 box. Please check the contents of the box against the list below.
If anything is missing, please contact Customer Service. In Australia, contact CNP
Brands on 1300 667 137, in New Zealand contact Wainhouse Distribution on
0800 567 5000.
Supplied loose in box:
End panel
Side panel
Mattress base
Feet
60mm bolt
(Assembly bolt for side - end panels)
25mm bolt
(For bottom feet assembly)
35mm bolt
(For mattress base assembly)
Filling bolt & nut (pre-assembled)
Allen Key
Assembly Kit:
Loading...