INSTRUCTION MANUAL
MANUAL DE INSTRUCCIONES
NOTICE D’EMPLOI
BEDIENUNGSANLEITUNG
AUDEO106P
INSTRUCTION MANUAL
1. IMPORTANT NOTE 04
2. PRECAUTIONS 04
3. INTRODUCTION 04
4. POSITION, ASSEMBLY AND START-UP 05
5. LIST OF FUNCTIONS 07
6. DIAGRAM OF FUNCTIONS 07
7. CONFIGURATION DIAGRAM 26
8. TECHNICAL CHARACTERISTICS 27
9. BLOCK DIAGRAM 28
All numbers subject to variation due to production tolerances. ECLER S.A reserves the right to make
changes or improvements in manufacturing or design which may affect specifications.
3
1. IMPORTANT NOTE
Congratulations! You are the owner of a carefully designed and manufactured piece of
equipment. We thank you for choosing our AUDEO106P set of self-amplified speakers.
To achieve maximum operating capacity and performance it is VERY IMPORTANT to
read the remarks specified in this manual very carefully and bear them in mind before connecting
the speakers. To guarantee optimum operation, we recommend that maintenance be carried out by
our Authorised Technical Services.
2. PRECAUTIONS
There are no user adjustable parts inside the unit.
Never use this unit in proximity to water.
Do not expose the unit to splashed water.
Avoid placing liquid containers on it.
Avoid placing the unit next to sources of heat, spotlights or heaters.
Use only the accessories specified by the manufacturer, adapted for each application.
3. INTRODUCTION
AUDEO106P embodies the success of the prestigious AUDEO series with its simple
formula: cost-effective, easy to use and ideal for an enormous variety of multimedia and
audiovisual applications. A pair of stereo self-amplified speakers with excellent performance and
a unique design, fitting easily into training classes, schools, meeting and multimedia presentation
spaces, shops, etc.
Main features:
• Pair of self-amplified speaker + passive speaker
• “Full-range” speakers, 2 channels (6” + 1”)
• Euroblock balanced stereo input in MASTER unit
• RCA unbalanced stereo input in MASTER unit
• Connection between MASTER and SLAVE unit through Euroblock connectors.
• Built-in amplifier, 2 x 20 W RMS (MASTER unit)
• Built-in power supply (MASTER unit)
• Auto stand-by function (sleep mode / energy saving without needing to turn the unit on daily)
• 2 band tone control and volume control
• Built-in Anti-Clip system
• ON / STD. BY, Signal Present and CLIP LED display
• Reinforced ABS construction
• Available in black or white
• Includes wall mount supports and steel safety cable
• Compatible with AUDEO series accessories for desktop and microphone stand set-up
4
4. POSITION, ASSEMBLY AND START-UP
The following should be followed as general rules:
Always install the unit on hard, firm surfaces.
For good sound playback there must not be obstacles between the unit's position and
the audience.
Adjust the sound pressure levels to the playback needs. Despite its small size,
AUDEO106P has a much better performance than domestic speakers.
In the packaging of the AUDEO speakers, you will find everything you need to complete the
installation of the two units:
Two wall mount brackets (one per cabinet)
Four screws and four 6 mm wall plugs (two per cabinet)
Two plastic rivets to lock the loudspeakers to the brackets
5 mm Allen wrench
Two steel safety cables to prevent the speakers from eventually falling down
(one per box) with their corresponding screws and washers.
Two 2 terminal Euroblock connectors and a piece of corresponding speaker cable for
MASTER-SLAVE connection
Two 3 terminal Euroblock connectors for stereo balanced INPUT
Two jumpers for configuring the input sensitivity.
A mains cord for the MASTER unit through
Instruction manual
Warranty card
Wall mount set-up:
1. Drill two 6 mm. holes in the wall, matching the position of the bracket's holes.
2. Insert two 6 mm. wall plugs.
3. Hold the safety cable on the rear of the bracket (see diagram).
4. Place the bracket in its position, previously passing the safety cable and the signal
cable through the square hole of the bracket. Insert and tighten the screws, firmly
holding on to the wall mount bracket.
5. Connect the power cables, signal input and connection between the two units to the
connectors on the rear of the speaker. Pay attention to the correct polarity of the
Euroblock terminals.
6. Place the speaker in its final position by vertically sliding it down so that the guide on
the back fits with the guide on the rear of the bracket. Insert the plastic rivet into the
hole in the rear of the speaker.
7. Attach the safety cable to the rear of the speaker so it does not accidentally fall down
and cause material or personal damage.
8. Turn the box to the desired position both vertically and horizontally. Tighten the Allen
screws to secure this position on both axes.
To operate the speakers, turn on the MASTER (L) unit with the switch on the rear panel,
adjust the volume and equalize the sound to the desired position. The CLIP indicator warns of
power amplifier saturation due to an excess of signal. To avoid distortion and preserve the sound
quality, it is important that this indicator is not constantly lit while the unit is in normal operation. It
should light up periodically, based on the rhythm of the music's bass frequencies.
5
NOTE: To protect the system from eventual overloads in the power line, there is a T1A
250V 5x20 mains fuse in the MASTER unit in a fuse holder located in the rear slot. In the
event that the fuse blows, unplug the unit, remove the wall mount bracket, unscrew the fuse
holder, remove the fuse and replace it with an identical one. If the new fuse blows
7. Euroblock balanced input in line 2 left L channel
8. Euroblock balanced input in line 2 right R channel
9. Amplified output right R channel
10. VOL output volume control
11. Indicator light for left channel clipping CLIP 12. Indicator light for right channel clipping CLIP
13. Mains socket
14. On/Off switch
15. Fuse holder
16. Hole for the locking rivet
17. Safety cable anchoring point
6. DIAGRAM OF FUNCTIONS
7
8
INSTRUCTION MANUAL
1. NOTA IMPORTANTE 10
2. PRECAUCIONES 10
3. INTRODUCCIÓN 10
4. UBICACIÓN, MONTAJE Y PUESTA EN MARCHA 11
5. LISTA DE FUNCIONES 13
6. DIAGRAMA DE FUNCIONES 13
7. DIAGRAMA DE CONFIGURACIÓN 26
8. CARACTERÍSTICAS TÉCNICAS 27
9. DIAGRAMA DE BLOQUES 28
Todos los datos están sujetos a variación debida a tolerancias de producción. ECLER S.A. se
reserva el derecho de realizar cambios o mejoras en la fabricación o diseño que pudieran afectar las
especificaciones.
9
Loading...
+ 19 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.