EchoNous Uscan Setup Manual

The Uscan is for non-invasive imaging of the human body
and is intended for the following applications: Abdominal,
Musculoskeletal, Pediatric, and Small Organ. Users must
have ultrasound training for abdominal, musculoskeletal,
pediatric, and small organ imaging.

The Uscan can also be used to obtain an image of the
bladder that is used to automatically determine bladder
volume.

TABLET SETUP GUIDE

Refer to user manual before use.

Caution: Federal (USA) law restricts this
device to sale by or on the order of a
physician.

Remove the plastic bin at the back of
the stand.

1

FOLD AT CENTRE

www.echonous.com

ECHONOUS, INC

P005331-001 Rev A

Route the Vein USB cable down
through the stem of the stand, feeding

the Micro-B end rst.

2

Attach the charger to the multiple
socket outlet.

9

The tablet allows either the Linear
probe or the charger cable to be
connected. To scan with the Linear
probe, connect the Vein cable. To
charge the tablet, connect the charger
cable.

10

Connect the charger cable to the tablet
and connect the system power cord to
an AC socket to fully charge the system.

Place the plastic bin back into position.

11

Follow the on-screen setup wizard to

congure the tablet.

• Select Language.

• Setup Date and Time.

• Connect to Wi-Fi (Optional). Note:

A Wi-Fi connection is required
for automatic registration of the
system.

• Enter Registration Information.

12

A. Connect the Micro-B end of the Vein
USB cable to the Linear probe box.

B. Remove the backing from the 3M
Dual Lock™ strip on the probe box.

3

Attach the Linear probe box into the
bay by pressing it into place in the
position shown.

4

A. Remove the grommet.

B. Pull the Linear probe and cable

down through the grommet.

C. Reinstall the grommet into position.

5

A. Attach the ag label to the Linear

probe cable.

B. Trim the excess cable tie.

6

Loosen the nuts of the tablet holder
and place the tablet into position.

Position the clamp to securely hold the
tablet, then tighten the nuts.

7

Feed the USB cable of the charger up
through the stem of the stand.

8

A

B

A

B

C

A

B