Echo RX-01 Instructions Manual

®

Echo RX-01 Instructions

TM

Bluetooth Receiver

Product Code: 756

1

2

3

1

MFB Button — Power On/Off, Pair, Music Pause/Play

2

LED Indicator

3

USB Charging Jack

Charging the Receiver

The LED flashes red when the receiver is low battery. Please recharge the
receiver.
The LED keeps red while charging. It takes about 3 hours for a full charge.
When the charging is completed, LED light will turn off.

Power on/off the Receiver

Power On:

Press and hold the MFB until the LED indicator flashes solid blue for 1
second and then flashes blue and red alternatively with an ascending “beep”
sound heard.
The receiver enters pairing mode automatically.

Power Off:

Press and hold the MFB for 3 seconds until the LED indicator flash solid red
then turn off with a decreasing “beep” sound heard.

Pairing the Receiver

1）Enter into pairing mode：

Ensure the receiver is turned off, otherwise turn it off first and then Press
and hold the MFB button for 3 seconds. The LEDS flash red and blue
alternatively.

Noted:

The pairing mode will last 5 minutes, the receiver “Echo-RX01” will
switch to standby mode automatically if no devices connected within 5
minutes.

2）Pairing the Mobile Phone

1-Set the receiver into pairing mode
2-Activate your mobile phones’ Bluetooth function, then search for Bluetooth
devices within range, select “Echo-RX01” from the list of devices shown.
And they will be connected automatically.
3-After connected successfully, the LED flashes blue once every 3 seconds.

Noted:

◆ If no device connected with “Echo-RX01” within 20 minutes, the receiver
will turn off automatically in order to save power.

◆ After successful pairing, the receiver and the mobile phone will remember
each other, they will not need to be re-pair next time.

Music Pause/Play

Connect “Echo-RX01” to any speaker and a Bluetooth music device at the
same time, now you can enjoy music wirelessly.
Playing/Pausing music: Short press MFB button once

LED indicator

Pairing mode: LED flashes red and blue alternately
Standby mode and not connected: LED flashes Blue once every 2 seconds
Connected: LED flashes Blue once every 3 seconds
Low Battery: LED flashes Red once every second

Clear the pairing list:

Press and hold the power button for 10 seconds until the blue and red LED
flash together.

Hearing Products International Limited declares that the Echo
RX-01™ complies with all relevant EU directives.

®

The full EU declaration of conformance for the Echo

RX-01™

is available from Hearing Products International Ltd.

Hearing Products International Limited

Echo House, 26/27 Haigh Park, Stockport, SK4 1QR, England

Tel. [phone]

Fax [phone]

www.hear4you.com

RoHS

®

Hearing Products International Ltd. reserve sole right to alter prices, design and/ or

technical specifications or colours without prior notice. Echo RX-01™ Instructions ©

Copyright Hearing Products International Limited. E&OE 07/01/19. Version 1.

UK: Waste electrical products and batteries should not be disposed of with household

waste. Separate disposal facilities exist, for your nearest facilities see www.recycle-more.

co.uk or Hearing Products International Limited for full details www.hear4you.com.

®

Printed in China