Echo PPT-231, PPFD-260, PPT-265, PPT-261, 89865022060 User Manual
...
Power Pruner
Operator's Manual
TM
MODEL:
99946400020 5' EXTENSION
FOR MODELS PP-1200/1250/1260
PPT-2100/2400
PPT-230/231
PPT-260/261
PPT-280
PPT-265
99946400030
5' EXTENSION
FOR MODELS PP-1400
PPFD-2400
PPFD-260
ENGLISH
X7502300600
ESPAÑOL
FRANCAIS
W ARNING DANGER
Read rules for safe operation and instructions carefully. ECHO provides an Operator's
Manual and a Safety Manual with your original Power PrunerTM. Those manuals and this
manual must be read and understood for proper and safe operation.
89865022060
04/07
2
5 FOOT EXTENSION INSTALLA TION
Tools Required: Screwdriver, 3 mm Hex Wrench, Measuring Tape
Parts Required: 1524mm (5 Foot) Extension
W ARNING DANGER
The Saw Chain is sharp! Always wear gloves when handling the
cutting attachment, otherwise serious personal injury may result.
A
D
1 . Loosen the four (4) screws (A), and locator screw (B) on cutting
attachment, and remove the cutting attachment.
(PPT Only)
2 . Loosen clamp knob (C) turning counter clockwise.
3 . Pull aluminum housing (D) out of fiberglass housing 610mm (24 in.),
then slide (D) back into fiberglass housing approximately 305mm
(12 in.) exposing inner drive shaft (E).
(All Models)
4 . Measure 178mm (7 in.) from end of aluminum housing (D), and mark
the housing.
5 . Loosen the extension clamp knob (G) turning counter clockwise.
6 . Align inner drive shaft adapter (E) with extension shaft (F).
NOTE
Assure locator hole in extension shaft is oriented on same side as
locator hole in aluminum housing (D).
7 in.
E
B
C
D
12 in.
D
F
G
7 . Align ridges on aluminum housing (D) with seams in extension
housing. Slide the extension onto housing (D) to the 178mm (7 in.)
mark. Tighten extension clamp knob (G) securely.
D
G
C
D
Loading...