Echo CH611DH Instruction v.1

Instructions

SUBJECT: SNUBBER HARNESS,

KIT # 75976-00

FITS MODELS: 6" CHIPPERS

(CH6670H, CH611DH, CH6993H)

AND 8" TURNTABLE CHIPPERS

(CH8670H, CH8993H)

WARNING

Before inspecting or servicing any part of this machine,
shut off power source, remove key, disconnect the
battery cables and make sure all moving parts have
come to a complete stop.

These instructions describe how to install two snubber
harnesses.

For 8” chippers: To locate the valve assembly, open the
belt cover. The valve assembly is located to the right of
the belt (see below).

1.2 Unplug the connectors on the valve assembly (shown
with arrows below).

1. INSTALL SNUBBER HARNESSES

1.1 Locate snubber harnesses in kit (see below).

For 6” chippers: To locate the valve assembly, open the
engine hood. The valve assembly is under the gauge panel
in the engine compartment (see below).

1.3 Plug the snubber harnesses into the valve assembly,
and then plug the connectors removed in step 1.2 into the
other end of the snubbers, taking care to replace connectors
into the same side as which they were removed.

KIT NO. 75976-00, SNUBBERS WITH RELAY

PART NO. DESCRIPTION QTY

36250-00 SNUBBER HARNESS 2

Instruction Sheet

PN 75975-00

Rev.021408

ECHO BEAR CAT

www.bearcatproducts.com

237 NW 12th Street, West Fargo, ND 58078-0849

Phone: [phone] • Toll Free: 800.247.7335 • Fax: [phone]

E-mail: [e-mail] • [e-mail]