www.bearcatproducts.com
5 INCH CHIPPER/SHREDDER/
BLOWER
SC5627B – 627cc BRIGGS & STRATTON
ENGLISH
PN: 73409-00
Rev. 062917
Companion to 73418-00
Range: 5VJAA0215HW005514 - Current
OWNER'S MANUAL
Before You Begin
DEAR ECHO BEAR CAT CUSTOMER
Thank you for purchasing a ECHO Bear Cat product. The ECHO Bear Cat line is designed, tested, and manufactured
to give years of dependable performance. To keep your machine operating at peak eciency, it is necessary to adjust
it correctly and make regular inspections. The following pages will assist you in the operation and maintenance of your
machine. Please read and understand this manual before operating your machine.
If you have any questions or comments about this manual, please call us toll-free at 1.888.645.4520.
If you have any questions or problems with your machine, please call or write your local authorized ECHO Bear Cat
Dealer.
This document is based on information available at the time of its publication. ECHO Bear Cat is continually making
improvements and developing new equipment. In doing so, we reserve the right to make changes or add improvements
to our product without obligation for equipment previously sold.
PLEASE SEND US YOUR WARRANTY CARD
A warranty card is included in your owner's kit packaged with your machine. Please take the time to ll in the information
requested on the card. When you send your completed card to us, we will register your machine and start your coverage
under our limited warranty or go to bearcatproducts.com/warranty/warranty-registration/.
FOR MACHINE SERVICE OR PARTS:
For service assistance, contact your nearest authorized
ECHO Bear Cat dealer or the factory. For parts, contact
your authorized dealer. Your dealer will need to know the
serial number of your machine to provide the most ecient
service. See below for information on how to identify and
record the serial number for your machine.
FOR ENGINE SERVICE OR PARTS:
For engine service or parts, contact your nearest
authorized engine dealer. ECHO Bear Cat does not
handle any parts, repairs or warranties for engines.
IDENTIFICATION NUMBER LOCATION
Your machine will have either a serial number or vehicle
identication number (VIN). VINs are located on the left
side of the trailer frame near the hitch. They are 17-digit
numbers of the format: 5VJAA001XXWXXXXX. Serial
numbers are located on the machine body. They are
6-digit numbers.
Record your identication number in the space provided
and on the warranty registration card.
ORDERING PARTS
Only genuine ECHO Bear Cat replacement parts should
be used to repair the machine. Replacement parts
manufactured by others could present safety hazards,
even though they may t on this machine. Replacement
parts are available from your ECHO Bear Cat dealer.
Provide the following when ordering parts:
The SERIAL NUMBER or VIN of your machine.
The PART NUMBER of the part.
The PART DESCRIPTION.
The QUANTITY needed.
SERIAL NUMBER OR VIN
HOW TO CONTACT ECHO BEAR CAT
ADDRESS PHONE E-MAIL HOURS
237 NW 12th Street
P.O. Box 849
West Fargo, ND 58078
© 2017, CRARY INDUSTRIES, ALL RIGHTS RESERVED. PRODUCED AND PRINTED IN THE U.S.A.
888.625.4520
701.282.5520
Fax: 701.282.9522
sales@bearcatproducts.com
service@bearcatproducts.com
Monday - Friday,
8 a.m. to 5 p.m.
Central Time
LIMITED WARRANTY
This warranty applies to all ECHO Bear Cat Outdoor Power Equipment manufactured by Crary Industries, Inc.
and does not include gas engine or electric powered pressure washers under the ECHO Bear Cat brand. See
ECHO Bear Cat Pressure Washer Limited Warranty for complete warranty details on those products.
Crary Industries, Inc. warrants to the original owner each new ECHO Bear Cat product to be free from defects
in material and workmanship, under normal use and service. The warranty shall extend, from date of purchase,
3 years (U.S. and Canada only (2 years outside U.S. and Canada)) for Consumer use of the product, 1 year
for Commercial applications and 6 months for Rental applications. Replacement parts and accessories are
warranted for (90) days from date of installation. Batteries for Inverters and Generators are warranted for ninety
(90) days from the date of purchase.
"Consumer" dened as: complete unit for personal, residential or non-income producing use.
"Commercial" dened as: complete unit for commercial, institutional, property management, agricultural,
horticultural or income producing use.
"Rental" dened as: complete unit for rental purposes to produce income.
*Models SC2163, SC2170 & SC3206 are classied as Consumer grade products and will not qualify for
warranty coverage if used for Commercial or Rental purposes.
The product is warranted to the original owner by either a completed warranty registration on le at Crary
Industries, Inc. and/or proof of sale. Warranty coverage begins on the date of purchase. The warranty
registration can be registered on-line by visiting http://bearcatproducts.com/warranty/warrantyregistration/ or
the paper card completed and returned to Crary Industries, Inc.
In the event of a failure, return the product, at your cost, along with proof of purchase to the selling ECHO Bear
Cat dealer. Crary Industries, Inc. will, at its option, repair or replace any parts found to be defective in material
or workmanship. Warranty on any repairs will not extend beyond the product warranty. Repair or attempted
repair by anyone other than an authorized ECHO Bear Cat dealer as well as subsequent failure or damage that
may occur as a result of that work will not be paid under this warranty. Crary Industries, Inc. does not warrant
replacement components not manufactured or sold by Crary Industries, Inc.
1. This warranty applies only to parts or components that are defective in material or workmanship.
2. This warranty does not cover normal wear items including, but not limited to: batteries, bearings, belts,
pulleys, lters, chipper blades, shredder ails or knives.
3. This warranty does not cover normal maintenance, service or adjustments.
4. This warranty does not cover depreciation or damage due to misuse, negligence, accident or improper
maintenance.
5. This warranty does not cover damage due to improper setup, installation or adjustment.
6. This warranty does not cover damage due to unauthorized modications of the product.
7. Engines are warranted by the respective engine manufacturer and are not covered by this warranty.
Crary Industries, Inc. is not liable for any property damage, personal injury or death resulting from the
unauthorized modication or alteration of an ECHO Bear Cat product or from the owner's failure to assemble,
install, maintain or operate the product in accordance with the provisions of the Owner's manual.
Crary Industries, Inc. is not liable for indirect, incidental or consequential damages or injuries including but not
limited to loss of crops, loss of prots, rental of substitute equipment or other commercial loss.
This warranty gives you specic legal rights. You may have other rights that may vary from area to area.
Crary Industries, Inc. makes no warranties, representations or promises, expressed or implied as to the
performance of its products other than those set forth in this warranty. Neither the dealer nor any other person
has any authority to make any representations, warranties or promises on behalf of Crary Industries, Inc.
or to modify the terms or limitations of this warranty in any way. Crary Industries, Inc., at its discretion, may
periodically oer limited, written enhancements to this warranty.
CRARY INDUSTRIES, INC. RESERVES THE RIGHT TO CHANGE THE DESIGN AND/OR
SPECIFICATIONS OF ITS PRODUCTS AT ANY TIME WITHOUT OBLIGATION TO PREVIOUS
PURCHASERS OF ITS PRODUCTS.
ENGLISH
TABLE OF CONTENTS
1 SAFETY .................................................................. 1
1.1 SAFETY ALERT SYMBOL ........................................ 1
1.2 FIRE HAZARD INFORMATION ................................ 1
1.3 BEFORE OPERATING .............................................. 1
1.4 OPERATION SAFETY ............................................... 2
1.5 BATTERY SAFETY .................................................... 3
1.6 MAINTENANCE/STORAGE SAFETY ...................... 3
1.7 TOWING SAFETY ..................................................... 3
1.8 SAFETY DECALS ..................................................... 4
1.9 SAFETY DECAL LOCATIONS ................................. 5
2 ASSEMBLY............................................................. 6
2.1 ATTACH TRAILER WHEELS .................................... 6
2.2 ATTACH HITCH ASSEMBLY .................................... 6
2.3 ATTACH CHIPPER CHUTE ...................................... 7
2.4 ATTACH DISCHARGE TUBE ................................... 7
2.5 ATTACH SHREDDER CHUTE TRAY ....................... 8
2.6 ATTACH CHIPPER EXTENSION (CE
COMPLIANT MODELS ONLY) ....................................... 8
2.7 ADD OIL TO ENGINE ................................................ 8
2.8 INSTALL BATTERY ................................................... 8
2.9 FILL THE FUEL TANK ............................................... 8
3 FEATURES & CONTROLS ................................... 9
5 SERVICE & MAINTENANCE .............................. 14
5.1 MAINTENANCE SCHEDULE ................................. 14
5.2 ROTOR LOCK ......................................................... 15
5.3 OPEN/CLOSE ACCESS COVER ........................... 15
5.4 CHIPPER BLADES MAINTENANCE ..................... 15
5.5 REMOVING THE BLADES ..................................... 16
5.6 SHARPENING THE BLADES ................................. 16
5.7 INSTALLING THE BLADES .................................... 16
5.8 SETTING CHIPPER BLADE CLEARANCE .......... 16
5.9 SHREDDER KNIVES MAINTENANCE .................. 17
5.10 REMOVING THE SHREDDER KNIVES .............. 17
5.11 TRAILER MAINTENANCE TIPS ........................... 18
5.12 CLEARING A PLUGGED ROTOR ........................ 18
5.13 REMOVING THE ROTOR ..................................... 18
5.14 DRIVE BELT........................................................... 18
5.15 CHANGE OIL ......................................................... 19
5.16 LUBRICATION ....................................................... 20
6 TROUBLESHOOTING .........................................21
7 SPECIFICATIONS ............................................... 23
7.1 BOLT TORQUE ........................................................ 24
8 OPTIONS .............................................................. 25
4 OPERATION ......................................................... 11
4.1 STARTING ENGINE .................................................11
4.2 OPERATING THE CHIPPER ...................................11
4.3 CHIPPER OPERATION GUIDELINES .................. 12
4.4 SHREDDER ADJUSTER ........................................ 13
4.5 SLOWING AND STOPPING THE CHIPPER
ROTOR AND ENGINE .................................................. 13
1 SAFETY
Section
ENGLISH
1.1 SAFETY ALERT SYMBOL
The Owner/Operator's manual uses this symbol to alert
you of potential hazards. Whenever you see this symbol,
read and obey the safety message that follows it. Failure
to obey the safety message could result in personal injury,
death or property damage.
DANGER
Indicates an imminently hazardous situation that, if not
avoided, will result in death or serious injury.
WARNING
The engine on your power equipment, like most outdoor
power equipment, is an internal combustion engine that
burns gasoline or diesel fuel (hydrocarbons). If operating
your power equipment in aected areas, it must be
equipped with a spark arrestor in continuous eective
working order. The spark arrestor must be attached to the
engine exhaust system in such a manner that ames or
heat from the system will not ignite ammable material.
Failure of the owner/operator of the equipment to comply
with federal, state, and local laws may subject him or her
to nes and/or other penalties. Contact your local re
marshal or forest service for specic information about
which regulations apply in your area.
The standard muer installed on the engine is spark
arrestor capable. Spark arrestors require regular
maintenance. See the Service & Maintenance section of
this manual for more information.
Contact local re authorities for laws or regulations
regarding re prevention requirements.
1.3 BEFORE OPERATING
Indicates a potentially hazardous situation that, if not
avoided, could result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation that, if not
avoided, may result in minor or moderate injury.
1.2 FIRE HAZARD INFORMATION
Federal, state, and local laws may prohibit the operation
of an internal combustion engine using hydrocarbon
fuels on any forest covered, brush
covered or grass covered land or on
land covered with grain, hay or other
ammable agricultural crops, without
an engine spark arrestor in continuous
eective working order.
1. Read and understand this owner's manual. Be
completely familiar with the controls and the proper
use of this equipment.
2. Familiarize yourself with all of the safety and
operating decals on this equipment and on any of its
attachments or accessories.
3. Keep safety decals clean and legible. Replace
missing or illegible safety decals.
4. Obtain and wear safety glasses
and use hearing protection at all
times when operating this machine.
5. Avoid wearing loose tted clothing.
Never operate this machine while wearing clothing
with drawstrings that could wrap around or get caught
in the machine.
15 INCH CHIPPER/SHREDDER/BLOWER
SAFETY
6. Do not operate this machine
if you are under the inuence
of alcohol, medications, or
substances that can aect your
vision, balance or judgement. Do
not operate if tired or ill. You must
be in good health to operate this
machine safely.
7. Do not operate this equipment in the vicinity of
bystanders. Keep the area of operation clear of all
persons, particularly small children. It is recommended
that bystanders keep at least 50 feet (15 meters)
away from the area of operation.
8. Do not allow children to operate this equipment.
9. Use only in daylight or good articial light.
10. Do not run this equipment in an enclosed area. Engine
exhaust contains carbon monoxide gas, a deadly
poison that is odorless, colorless and tasteless.
Do not operate this equipment in or near buildings,
windows or air conditioners.
11. Always use an approved fuel container. Do not
remove gas cap or add fuel when engine is running.
Add fuel to a cool engine only.
12. Do not ll fuel tank indoors. Keep open ames, sparks,
smoking materials and other sources of combustion
away from fuel.
13. Do not operate machine without shields in place.
Failure to do so may cause serious injury or death.
14. Keep all guards, deectors, and shields in good
working condition.
15. Before inspecting or servicing any part of this machine,
shut o the machine and make sure all moving parts
have come to a complete stop. Disconnect the battery
and remove the ignition key where applicable.
16. Check that all screws, nuts, bolts, and other fasteners
are secured, tightened and in proper working condition
before starting the machine.
17. Do not transport or move machine while it is operating
or running.
1.4 OPERATION SAFETY
1. Always stand clear of discharge area when operating
this machine. Keep face and body away from feed
and discharge openings.
2. Keep hands and feet out of feed
and discharge openings while
machine is operating to avoid
serious personal injury. Stop
and allow machine to come to a
complete stop before clearing
obstructions.
3. Set up your work site so you are not endangering
trac and the public. Take great care to provide
adequate warnings.
4. Do not climb on machine when operating. Keep
proper balance and footing at all times.
5. Check cutting chamber to verify it is empty before
starting the machine.
6. The rotor will continue to rotate after being disengaged.
Shut o the machine and make sure all moving parts
have come to a complete stop before inspecting or
servicing any part of the machine. Disconnect the
battery and remove the ignition key if applicable.
7. Do not insert branches with a diameter larger than
the max chipper capacity into machine or machine
damage may occur.
8. When feeding material into machine, do not allow
metal, rocks, bottles, cans or any other foreign
material to be fed into the machine.
9. Ensure debris does not blow into trac, parked cars,
or pedestrians.
10. Keep the machine clear of debris and other
accumulations.
11. Do not allow processed material to build up in the
discharge area. This may prevent proper discharge
and can result in kickback of material through the
feed opening.
12. If the machine becomes clogged, the cutting
mechanism strikes any foreign object, or the machine
starts vibrating or making an unusual noise, shut o
machine immediately and make sure all moving parts
have come to a complete stop. Disconnect the battery
and remove the ignition key if applicable. After the
machine stops: A) Inspect for damage, B) Replace
or repair any damaged parts, and C) Check for and
tighten any loose parts.
13. On electric start models, disconnect cables from
battery before doing any inspection or service.
Remove key.
14. Check blade bolts for proper torque after every 8 hours
of operation. Check blades and rotate or resharpen
daily or as required to keep blades sharp. Failure
to do so may cause poor performance, damage or
personal injury and will void the machine warranty.
2 5 INCH CHIPPER/SHREDDER/BLOWER
SAFETY
1.5 BATTERY SAFETY 1.6 MAINTENANCE/STORAGE SAFETY
Improper use and care of the battery on electric start
models can result in serious personal injury or property
damage. Always observe the following safety precautions.
● Poison/Danger – Causes Severe Burns. The
battery contains sulfuric acid. Avoid contact with skin,
eyes or clothing. Keep out of reach of children.
● ANTIDOTE – External Contact: Flush immediately
with water.
● ANTIDOTE – Internal: Drink a large amount of water
or milk. Follow with milk of magnesia, beaten egg or
vegetable oil. Call a physician immediately.
● ANTIDOTE – Eye Contact: Flush with water for 15
minutes. Get prompt medical attention.
1. The battery produces explosive gases. Keep sparks,
ame or cigarettes away. Ventilate area when
charging battery. Always wear safety goggles when
working near battery.
2. The battery contains toxic materials. Do not damage
battery case. If case is broken or damaged, avoid
contact with battery contents.
3. Neutralize acid spills with a baking soda and water
solution. Properly dispose of a damaged or wornout battery. Check with local authorities for proper
disposal methods.
4. Do not short circuit battery. Severe fumes and re can
result.
5. Before working with electrical wires or components,
disconnect battery ground (negative) cable rst.
Disconnect positive cable second. Reverse this order
when reconnecting battery cables.
DANGER / POISON
FLUSH EYES
IMMEDIATELY
WITH WATER
SHIELD EYES
EXPLOSIVE
GASES CAN
CAUSE BLINDNESS
OR INJURY
KEEP OUT OF THE REACH OF CHILDREN. DO NOT TIP. KEEP VENT CAPS TIGHT AND LEVEL.
NO
• SPARKS
• FLAMES
• SMOKING
SULFURIC
ACID CAN
CAUSE
BLINDNESS OR
SEVERE BURNS
GET
MEDICAL
HELP
FAST
1. Before inspecting, servicing, storing, or changing
an accessory, shut o the machine and make sure
all moving parts have come to a complete stop.
Disconnect the battery and remove the ignition key
where applicable.
2. Replace any missing or unreadable safety decals.
Refer to the safety decal section for part numbers.
3. Allow machine to cool before storing in an enclosure.
4. Store the machine out of reach of children and where
fuel vapors will not reach an open ame or spark.
5. Never store this machine with fuel in the fuel tank
inside a building where fumes may be ignited by
an open ame or spark. Ignition sources can be hot
water and space heaters, furnaces, clothes dryers,
stoves, electric motors, etc.
6. Drain the fuel and dispose of it in a safe manner for
storage periods of three months or more.
1.7 TOWING SAFETY
1. Position and lock the discharge tube to face the
opposite direction of the towing vehicle prior to towing.
2. Connect hitch safety chains. Tighten trailer hitch
bolts. Do not attempt to tow the trailer if the vehicle is
not equipped with a 2" (50 mm) ball.
3. Do not exceed the maximum towing speed indicated
on tire sidewall. Inate tires to manufacturer's
specications as stated on the tire sidewall.
4. Optimum towing performance can be achieved by
maintaining a horizontal trailer hitch.
5. Check wheel lug bolts periodically to ensure they are
tight and secure.
6. Make sure the jack stand and the rear stabilizer
(where applicable) on the trailer are in the UP position
during towing. Place the jack stand on a level surface
and secure it in the DOWN position before using.
7. Never allow passengers to ride on the machine.
8. If applicable, shut o fuel supply when towing.
9. Towing laws may vary in dierent countries/regions/
states. It is recommended that you contact your local
motor vehicle department for any special regulations
that pertain to towing and know the laws of any
country/region/state you travel through.
ENGLISH
35 INCH CHIPPER/SHREDDER/BLOWER
SAFETY
1.8 SAFETY DECALS
See Section 1.9 for decal locations. Familiarize yourself with all of the safety and operating decals on the machine
and the associated hazards. See the engine owner's manual or contact the engine manufacturer for engine safety
instructions and decals.
PN 12169
1
Keep hands and feet out of inlet and discharge
openings while machine is operating to avoid serious
personal injury. Stop and allow machine to come to a
complete stop before clearing obstructions.
PN 12172
2
Read and understand this owner/operators
manual. Be completely familiar with the
controls and the proper use of this equipment
Obtain and wear safety glasses and use
hearing protection at all times when operating
this machine.
Before inspecting or servicing any part of this
machine, shut o power source, remove the
key, disconnect spark plug wire from spark
plug and make sure all moving parts have
come to a complete stop.
PN 12176
6
Do not insert branches larger
than 3/4 inch into shredder or
machine damage may occur.
PN 12250
7
Check blade bolts for proper torque
after every 8 hours of operation.
Check blades and rotate or
resharpen daily or as required to
keep blades sharp. Refer to owners
manual for instructions. Failure to do so may cause poor performance,
damage or personal injury and will void the machine warranty.
PN 14942-00
8
PN 12173
3
Do not operate this equipment in the
vicinity of bystanders. Do not allow
children to operate this equipment.
Always stand clear of discharge area
when operating this machine. Keep face and body away from discharge
areas.
PN 12174
4
Do not operate machine without shields in place.
Failure to do so may cause serious injury or
death.
PN 12175
5
Keep hands and feet out of inlet and
discharge openings while machine is
operating to avoid serious personal injury.
Stop and allow machine to come to a
complete stop before clearing obstructions.
Read and understand you owners manual before operating. If owners
manual was not included or you have any questions, please call
800.247.7335 or 701.282.5520 (U.S.A.).
PN 32109-00
9
Do not operate this equipment in the vicinity
of bystanders. Do not allow children to
operate this equipment. Always stand clear
of discharge area when operating this
machine. Keep face and body away from
discharge areas. Rotate the discharge tube over the hitch before towing
and lock securely in place.
10
PN 32156-00
5.30-12
23
550 kPa, 80 psi
50
4 5 INCH CHIPPER/SHREDDER/BLOWER
SAFETY
11
12
*Decals 11-14 not for CE compliant machines.
PN 32327-00 ENG. & FR.
(32339-00 ESP. & PORT.)
PN 32328-00 ENG. & FR.
(32340-00 ESP. & PORT.)
1.9 SAFETY DECAL LOCATIONS
13
14
PN 32330-00 ENG. & FR.
(32342-00 ESP. & PORT.)
PN 32332-00 ENG. & FR.
(32341-00 ESP. & PORT.)
ENGLISH
The numbers below correspond to the decals in Section 1.8. Make certain that all safety and operating decals on this
machine are kept clean and in good condition. Decals that need replacement must be applied to their original locations.
5
6
5
9
7
1
3
4
8
2
10
*Decal located under shield
**Decal located on trailer
13
14
12
11
55 INCH CHIPPER/SHREDDER/BLOWER
Loading...