Echelon IzoT Plug-in for WireShark User Manual

IzoTTM Plug-in
for WireShark

Monitor, analyze, and troubleshoot IzoT networks
using the Wireshark packet analyzer.

078-0511-01A

Echelon,
Corporation that may be registered in the United States and other countries.

Other brand and product names are trademarks or registered trademarks of
their respective holders.

Neuron Chips and other OEM Products were not designed for use in
equipment or systems which involve danger to human health or safety or a
risk of property damage and Echelon assumes no responsibility or liability
for use of these products in such applications.

Parts manufactured by vendors other than Echelon and referenced in this
document have been described for illustrative purposes only, and may not
have been tested by Echelon. It is the responsibility of the customer to
determine the suitability of these parts for each application.

ECHELON MAKES AND YOU RECEIVE NO WARRANTIES OR
CONDITIONS, EXPRESS, IMPLIED, STATUTORY OR IN ANY
COMMUNICATION WITH YOU, AND ECHELON SPECIFICALLY
DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE.

No part of this publication may be reproduced, stored in a retrieval system,
or transmitted, in any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise, without the prior written permission of
Echelon Corporation.

LonTalk, LNS, IzoT, and the Echelon logo are trademarks of Echelon

Printed in the United States of America.
Copyright © 2014 by Echelon Corporation.

Echelon Corporation
www.echelon.com

Contents

The Izot Plug-in for Wireshark 1
Introduction 2

Installing the Wireshark Plug in 2
Monitoring Packets 2
Adding a Switch to the Network 3
Adding a Hub to the Network 3
Reading the Wireshark Logs 3

Contents iii