EBS Stanley Clarke signature Wah User Manual

SAMPLE SOUND SETTINGS

The following examples below show a few of the many sonic
possibilities of the EBS Stanley Clarke signature wah pedal.

CLASSIC WAH

FUNKY WAH

FREAKY WAH

MY PERSONAL SOUND

USERS MANUAL

EBS P

Select the operation when switching from wah

-

-

external DC power supply

- Connection for an . Use only

- The output from the pedal. Connect this output to an amplifier or

- Displays which function is engaged. RED for wah and

- Sets the filter bandwidth or Q value of the filter. Useful for

- Sets the operating range of the wah filter. This range controls

- Selects the Band Pass filter with extra boost.

- Selects High Pass filter mode.

- Selects Band Pass filter operation (classical wah type).

- Selects Low Pass filter operation (typical envelope type).

mode, either BYPASS in inner position of VOLUME in outer position..

OLUME/BYPASS SWITCH

V

instrument, set this switch to PASSIVE.
EBS Stanley Clarke signature wah pedal. If you are playing a passive
playing an active instrument or if you are using another pedal before the

ACTIVE/PASSIVE SWITCH Set this switch to ACTIVE position if you are

EBS original power supply, AD-9, if you are using this option.

DC POWER JACK

another pedal.

OUTPUT

INPUT

- Connect your instrument here.

SIDE PANELS

GREEN for volume function

LED Indicator

changing from classic envelope filter type to pure wah sounds.

WIDTH

frequencies from 50 Hz to 12.5 kHz.

RANGE

Boosted BP
High Pass
Band Pass
Low Pass

different filters:

MODE SWITCH - Selects the wah-wah filter mode from a choice of four

ROFESSIONALBASSEQUIPMENT

The EBS Team and Spellbinder Corp.

Clarke signature wah-wah pedal!
We hope you'll enjoy using the EBS Stanley

USA and musician StanleyClarke.
luthier Thomas Lieber from Spellbinder Corp.
Sweden by EBS Sweden AB in collaboration with
professional pedal designed and developed in

The EBS Stanley Clarke signature wah-wah is a

concept with a seriouslycool look.
enhance your bass groove based on a classic
few versatile wah pedals made especially to
The EBS Stanley Clarke wah-wah is one of the

Wah Wah pedal!

EBS Stanley Clarke signature

Thank you for purchasing the

THE CONTROLS

SETTING THE PEDAL TORQUE

Use the enclosed key to adjust
the pedal torque if necessary.
Turn clockwise to increase and
counter clockwise to decrease.

TROUBLE SHOOTING GUIDE

Please consult the following checkpoints, before consulting one of the
authorized EBS service centers.

Checkpoint

Action if answered NO

HOW TO USE THE EBS PHANTOM POWER™

The EBS Phantom Power System™ makes it
possible to power the EBS SC Wah with 9V DC
directly from the EBS NeoDrome, NeoGorm,
Fafner, HD350 and TD650 amps. Here is a
step-by-step instruction on how to do this.

1) Connect a stereo ¼” instrument cable (TRS, tip-ring-sleeve) between
the EBS Stanley Clarke signature wah pedal and the EBS amp.

2) Activate the phantom power on the amp. This is made with a flick of
a switch on most EBS amps. Please consult the manual for the EBS
amp you are using.

3) Connection done. You should now have power in the pedal, even if
the input jack is left open.

EBS PHANTOM POWER™TROUBLE SHOOTING

Checkpoint

1) Is a ¼” STEREO cable used between

the pedal and the amp?

2) Is there power available on the

RING connection of the ¼” plug?

Note that only the pedal that is directly connected to the EBS amp can be powered
with phantom power. This means that if you have more than one pedal, ONLY THE
LAST one can use the EBS Phantom Power™.

Action if answered NO

- Replace cable to a ¼” STEREO cable.

- Make sure the phantom power is
activated on the amp.

- Check cable.

GND

PH.

POWER

SIGNAL

1) Does the cable(s) work
properly?

2) Are the ¼” plugs properly
connected all the way in?

3) Are the Instrument cable
attached to the Right (input)
jack, and the Amp cable
connected to the Left (output)
jack?

4) Does the pedal have a battery,
and is the battery OK?

5) Does the indicator LED light
when pressing the foot switch
alternatively?

6) Does the instrument work?

7) Does the amplifier work and is
the volume turned up?

8) If you are using a DC adapter,
Are you using an EBS AD-9?

*EBS Sweden AB guarantees no error free operation when using other
DC adapter than the EBS AD-9. Warranty is void if higher voltage than

9.3 V has been used to feed the EBS Stanley Clarke signature wah pedal.

- Replace cable(s).

- Push the ¼” plugs all the way in.

- Reconnect input and output jacks.

- Put a new battery in the pedal.

- Replace battery.

- Check the instrument at your
nearest service center.

- Turn up volume or check the amp
at your nearest service center.

- Check the voltage and polarity of
the adapter you are using.*

AH

W

IGNATURE

S

LARKE

C

TECHNICAL SPECIFICATIONS EBSSCWAH

Nominal Input Level - 8 dBv (active) or

Input Impedance 1 Mohms
Frequency Response +0/-3 dB 20 - 20.000 Hz
Pedal Modes Wah-Wah or Volume
Filter Center Frequency Range 50 - 12.500 Hz
Filter Q Range 4.5 - 16
Filter Mode Low, Band & High Pass
Output Impedance 200 ohms
Nominal Output Level -8 dBv
Power Requirements 9V DC, 25 mA max.
Dimensions Width 95

Height 75
Length 270 (10 )

Weight 1.8 kg (4.0 lbs.)

Specifications are subject to change without notice.

*EBS recommends the use ofthe EBS AD-9 , which
supplies a well stabilized power to the EBS Stanley Clarke
signature wah and all your other pedals that operate with a
9V battery. The high current capacity, 650mA, makes it
possible to supply all pedalswith only one adapter,EBS AD-9!

- 20 dBv (passive)

mm (3.7")
mm (3.0")

mm .6"

DC adapter

IAGRAM

D

TANLEY

LOCK

B

EBS S

EBS Sweden AB · Grindstuvägen 44-46 · SE-16733 Bromma · Sweden

Phone: [phone] · Fax: [phone]

www.ebssweden.com

[e-mail]