DVI
Distribution
Amplifier
(EBD-DS912F)
1 In 2 Out
(EBD-DS914F)
1 In 4 Out
(EBD-DS918F)
1 In 8 Out
USER MANUAL V1.0
EBD-DS912F /
EBD-DS914F /
EBD-DS918F
Package Contents-
1 EBD-DS912F or EBD-DS914F or EBD-DS918F
DVI Distribution Amplifier
1 user manual
1 power adapter DC 12V for EBD-DS912F,
EBD-DS914F or 1 AC power cord for EBD-DS918F
2 rack rails, 8 screws for EBD-DS914F only
2 rack rails, 6 screws for EBD-DS918F only
Any thing missed, please contact with your vendor.
Introduction
Through the DVI (Digital Visual Interface) Distribution
Amplifier EBD-DS912F, EBD-DS914F, EBD-DS918F, you
can use one PC to display identical image on 2,4,8
monitors or even more.
DVI Distribution Amplifier is ideal for:
Test bench facilities
Data Center
Help desks
Features
Use PanelLink digital technology.
Supports high-resolution display up to UXGA
(25-165MHz).
Can be cascaded.
Compliant with the specification of DVI 1.0.
Support DVI-I Single Link.
1U rack design for EBD-DS914F, EBD-DS918F.
Specifications
Function
EBD-DS912F EBD-DS914F EBD-DS918F
Video Input
Connector
(DVI Female)
1
Video Output
Connector
(DVI Female)
2 4 8
Max. Resolution
1600x1200 60Hz
Cable Distance
(Device to Monitor)
10 m (Max.)
Signal Type
Standard DVI Signal
Power Adapter
(Min.)
DC 12V 1A DC 12V 1.25A
AC
100~240V
Housing
Metal
Weight
490 g
985 g
2530 g
Dimensions
(LxWxH) mm
153x76x46 269x105x46 440x185x45
-1-
Technical Specifications
Input/Output Signal
Pin #
Signal
Pin #
Signal
1
T.M.D.S Data 2-
16
Hot Plug Detect
2
T.M.D.S Data 2+
17
T.M.D.S Data 0-
3
T.M.D.S Data 2/4 Shield
18
T.M.D.S Data 0+
4
T.M.D.S Data 4-
19
T.M.D.S Data 0/5 Shield
5
T.M.D.S Data 4+
20
T.M.D.S Data 5-
6
DDC Clock
21
T.M.D.S Data 5+
7
DDC Data
22
T.M.D.S Clock Shield
8
Analog Vert. Sync
23
T.M.D.S Clock+
9
T.M.D.S Data 1-
24
T.M.D.S Clock-
10
T.M.D.S Data 1+
11
T.M.D.S Data 1/3 Shield
C1
Analog Red
12
T.M.D.S Data 3-
C2
Analog Green
13
T.M.D.S Data 3+
C3
Analog Blue
14
+5V Power
C4
Analog Horz Sync
15
GND
C5
Analog Ground
FRONT VIEW
1. Power LED
REAR VIEW
1. Input Power Jack
2. “DVI In” Port
3. “DVI Out” Port
*There are 2/4/8 out ports for EBD-DS912F /
EBD-DS914F / EBD-DS918F.
-2-
Installation
1. Turn off the PC and monitors.
2. Connect the DVI male extension cable between the PC
and the “DVI in” port of Distribution Amplifier.
3. Connect the DVI male/female extension cables between
the monitors and the “DVI out” ports of Distribution
Amplifier.
4. Connect the power cord and turn on the Distribution
Amplifier.
5. Turn on the PC and monitors.
Note:
If you install the DDC monitor for the Distribution
Amplifier, the rest of monitors must be the same
resolution as the DDC monitor.
Operation for cascade:
1. The function to display identical image on more
monitors, you request to attach another Distribution
Amplifier.
2. Connect the DVI male/female extension cable
between the former Distribution Amplifier of the “DVI out
1” port and the latter Distribution Amplifier of the “DVI in”
port.
Note:
Even though you are allowed to cascade the Distribution
Amplifier with varied ports, the image might become
unstable if cascade too many tiers of Distribution Amplifier.
P.S.: The example cascades the 2 and 4 ports Distribution
Amplifier; however, you can cascade the DVI Distribution
Amplifier with demanded
Port.
-3-
Trademarks:
All the companies, brand names, and product names
referred to this manual are the trademarks or
registered trademarks belonging to their respective
companies.
-4-
Loading...