E-blocks EB024-00-2 Technical datasheet
E-blocks™ Bluetooth board
Document code: EB024-30-2
Bluetooth board
EB024-00-2
Technical datasheet
Contents
1. About this document.................................................................................................................................................................. 2
2. General information................................................................................................................................................................... 3
3. Board layout .............................................................................................................................................................................. 4
4. Testing this product................................................................................................................................................................... 5
5. Circuit description ..................................................................................................................................................................... 7
Appendix 1 Circuit Diagram
Copyright © Matrix Multimedia Limited 2006 page 1
E-blocks™ Bluetooth board
Document code: EB024-30-2
1. About this document
This document concerns the E-blocks Bluetooth board code EB024 version 2.
The order code for this product is EB024.
1. Trademarks and copyright
PIC and PICmicro are registered trademarks of Arizona Microchip Inc.
E-blocks is a trademark of Matrix Multimedia Limited.
2. Other sources of information
There are various other documents and sources that you may find useful:
Getting started with E-Blocks.pdf
This describes the E-blocks system and how it can be used to develop complete systems for learning electronics and
for PICmicro programming.
PPP Help file
This describes the PPP software and its functionality. PPP software is used for transferring hex code to a PICmicro
microcontroller.
C and assembly strategies
Not provided for this product.
3. Disclaimer
The information in this document is correct at the time of going to press. Matrix Multimedia reserves the right to
change specifications from time to time. This product is for development purposes only and should not be used for
any life-critical application.
4. Technical support
If you have any problems operating this product then please refer to the troubleshooting section of this document
first. You will find the latest software updates, FAQs and other information on our web site:
www.matrixmultimedia.com . If you still have problems please email us at: support@matrixmultimedia.co.uk.
Copyright © Matrix Multimedia Limited 2006 page 2
E-blocks™ Bluetooth board
Document code: EB024-30-2
2. General information
Description
This E-blocks™ board contains a TDB BLU2i V2 module which adds Bluetooth functionality to your E-blocks
system. The class 1 Bluetooth module has a transmit power of 6dBm which should give a 100 yard transmission
range at a data transfer rate of 100Kbps. The module is programmed using the serial I
command superset, and can be interfaced to any microcontroller with a UART facility. The module is capable of
supporting a range of Bluetooth protocols including LAP, Data, and the headset profile. A compatible E-blocks
CODEC board for establishing headset audio transfer is available. Flowcode macros to support the use of this board
are available.
Features
• E-blocks compatible
• Low cost
• Provides a Bluetooth interface for all your projects
2
C interface
• I
• 100 yard range
• Supports most Bluetooth protocols
2
C protocol, with an AT
Copyright © Matrix Multimedia Limited 2006 page 3
Loading...