Eberspacher Calltronic User Manual
VEHICLE HEATERS | TECHNICAL DOCUMENTATION
OPERATING INSTRUCTIONS
CALLTRONIC
TELEPHONE REMOTE CONTROL FOR
EBERSPÄCHER PARKING HEATERS
DE
EN
A WORLD OF COMFORT
2 | VEHICLE HEATERS – TECHNICAL DOCUMENTATION
CONTENTS
CHAPTER TITLE CONTENTS PAGE
1 INTRODUCTION
2 ADJUSTMENT AND
OPERATION
3 DISPLAYS AND
MALFUNCTIONS
Dear Customer, 3
Use 3
Operation with landline or mobile phone 5
Call Calltronic 5
Send input command to Calltronic 6
– Input command description 7
Program functions of the Calltronic 8
Program functions 9
Control using the button 10
Faults 10
Displays 11
Malfunctions 12
1 INTRODUCTION
VEHICLE HEATERS – TECHNICAL DOCUMENTATION | 3
DEAR CUSTOMER,
Thank you for purchasing a Calltronic
telephone remote control.
With this product you have a convenient
and innovative option for controlling your
Eberspächer parking heater.
These operating instructions supplement
the explanations provided by your
JE service partner who installed the heater
and once again summarises the Calltronic's
functions.
USE
Your Eberspächer heater can be remotely
controlled by telephone.
All mobile and landline phones are suitable
for use as controls. With them you can easily operate the Eberspächer heater installed
in your vehicle.
CAUTION!
When the Calltronic is started up, all data
on the SIM card is deleted.
PLEASE NOTE!
A SIM card / prepaid card of a mobile
phone operator is required to operate
the Calltronic; this is not included in the
scope of supply.
For further information on the SIM card /
prepaid card, please refer to the installation instructions.
Before starting up the Calltronic, care-
fully read through these operating instructions and the technical description
of your Eberspächer heater.
Note the location of your vehicle with
respect to the call setup.
Before starting up the Calltronic, care-
fully read through these operating instructions and the technical description
of your Eberspächer heater.
Note the location of your vehicle with
respect to the call setup.
If using a water heater, set the vehicle
heater to “Warm” before leaving the
vehicle.
The vehicle fan is to be set to level 1 if
a 3-stage fan, to level 2 if a 4-stage fan
and to at least 1/3 of the fan output if a
stepless fan.
4 | VEHICLE HEATERS – TECHNICAL DOCUMENTATION
1 INTRODUCTION
To prevent excessive discharge of the
vehicle battery in preselected heating
mode, we recommend you set the heating period according to the trip time.
Example:
For a trip time of approx. 30 minutes
(single distance), the heating period
should be set to 30 minutes.
The Calltronic is set to 60 min. heating
period in the factory.
Runtime settings are saved and can be
changed again later. A heating period of
1 – 999 minutes can be selected, continuous heating is possible (see installation instruction).
VEHICLE HEATERS – TECHNICAL DOCUMENTATION | 5
2 ADJUSTMENT AND OPERATION
OPERATION WITH LANDLINE OR MOBILE
PHONE
After the authorised landline / mobile phone
numbers have been entered, the Calltronic
is immediately fully functional with the preset factory setting.
To do this, execute the input command
“1234ACCLIM:XXXXXX” once, see Page 9.
It is possible:
to directly switch the heater ON or OFF
with a phone call.
to switch the heater ON or OFF with an
SMS.
to preselect starting of the heater within
24 hours with an SMS.
to have the input command confirmed
with a feedback SMS.
PLEASE NOTE!
The Calltronic can save up to 5 phone
numbers, see Page 9.
Calls, SMS and a feedback message by
SMS are all subject to charges.
CALL CALLTRONIC
Your network operator issued you with a
phone number for the Calltronic.
Use the landline / mobile phone to dial the
phone number of your Calltronic. The phone
number must be saved in the Calltronic
beforehand, see Page 9. After the call has
successfully been set up, the call from the
Calltronic is confirmed in the form of a tone
(factory setting), see Page 9.
The Calltronic confirms a call to switch
on the heater with three tones.
The Calltronic confirms a call to switch
off the heater with two tones.
After the connection has been disconnected, the heater starts, heating period 60
minutes (factory setting). The control lamp,
installed in the button, lights up.
PLEASE NOTE!
With the factory settings, Calltronic tone
feedback is only possible if using saved
phone numbers, see Page 9.
The phone numbers must be configured by
the user beforehand.
In the case of calls without saved phone
numbers the connection is ended without
tone feedback, the heater state remains
unchanged.
Loading...