
CONTAINS IMPORTANT SAFETY
Lot number
(TAKEN FROM CARTON)
_______ / _______ / _______
INFORMATION. PLEASE READ AND
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our customer service
department. We will replace the part FREE of charge.

DO NOT leave children unattended on or beside the recliner.
DO NOT use your recliner as a step stool.
DO NOT sit on the edge of the seat, armrests or on the backrest as this could make the recliner tip over.
* Ensure that all parts and components are located before beginning assemble.
* Assemble on soft surfaces to prevent damage to the product finish.
* Read all instructions before use of the recliner.
* Do not use the unit if it is damaged or broken.
* Caution: Adult assembly required.
* Assembly will require 2 people.
* Estimated assembly time: 5 minutes.
Leather: Dust regularly with a clean, dry cloth to avoid soil build-up. A damp cloth may be used occasionally to clean
surface. Buff dry. Keep leather soft and supple by applying a leather care product occasionally. Avoid contact with oil,
furniture polish and varnish.
Microfiber: Wipe away spills immediately to prevent staining. Use a cloth dampened with water or a professional
product to clean the fabric. Always test an inconspicuous area first. Allow upholstery to dry and brush lightly. Keep away
from heat to avoid glazing, melting or scorching.
WARNING: Should this product become
damaged, and/or components are broken or
missing, DO NOT USE.
Check bolts/screws periodically and tighten them if necessary.
If you are missing parts or have any questions about this product, contact our customer service representative first!
You can also order parts by writing to the address listed below. Please include the product model
number, color and a detailed description of the part.

STEP 1
On a clean smooth surface, gently turn the seat frame (B) on its side. Screw
feet (C ) and plastic washers (D) to seat frame (B) by turning clockwise .
NOTE:
The seat frame (B) is lined with a thin fabric underneath. It is necessary to
pierce through this fabric with the bolt on feet (C). Place your hand on the
corner of the seat base to locate where bolt must enter.

Attach back frame (A) to seat frame (B) by sliding the brackets on the
back frame (A) into the brackets on the seat frame (B).
Place the flap into position using the Velcro strips once the back frame
has been locked into place.
NOTE: Both sides must be inserted in the base at the same time. This step
is best performed with 2 people.

While holding on to the armrests, push back on the back rest to operate
the reclining function.

That's it ! You've finished assembling your recliner.
CAUTION: This unit is intended for use only with the products
and/or maximum weights indicated. Use with other products and/or
products heavier than the maximum weights indicated may result in
instability or cause possible injury.
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our customer service
department. We will replace the part FREE of charge.
Leather: Dust regularly with a clean, dry
cloth to avoid soil build-up. A damp cloth
may be used occasionally to clean surface.
Buff dry. Keep leather soft and supple by
applying a leather care product
occasionally. Avoid contact with oil,
furniture polish and varnish.
Microfiber: Wipe away spills immediately
to prevent staining. Use a cloth dampened
with water or a professional product to
clean the fabric. Always test an
inconspicuous area first. Allow upholstery
to dry and brush lightly. Keep away from
heat to avoid glazing, melting or scorching.

PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE
PLEASE CONTACT CUSTOMER SERVICE REPRESENTATIVES AT THE FOLLOWING
NUMBERS SHOULD THERE BE ANY MISSING OR DEFECTIVE PART(S).
Request Date:
Name:
Shipping Address:
Street & Number:
City & State:
Zip Code:
Day Time Phone Number:
(including area code)
Date & Place of Purchase:
Part(s) description and quantity: (Please be sure to list model number or SKN number)