Page 1
STEP 5
Attach Panel (B) to Panel (D) with Screw (1).
STEP 6
6.1 Tighten Pole (3) with Square Leg (5),
as shown.
6.2 Fix Square Leg (5) at center of Panel (B)
with Top Cap (6), as shown.
its Space. its Budget
Assembly Instruction
STEP 7
Upright the unit.
Unfold the Bins (7) and slide into the storage.
Cover the screw position with Screw Cap (9).
RECOMMENDED MAXIMUM WEIGHT
Approx. 20 minutes
Recomm. 1 Person
Tool RequiredTool Required
Furinno Econ Entertainment Center
w/Storage Bins
MODEL : 13054
41.7”(W) x 15.8”(H) x 11.7”(D)DIMENSION :
45
45lbs
15lbs
*Unit in Pound(lbs)
NOTE:
>This unit has been designed to support the
maximum loads shown. Exceeding these
load limits could cause sagging, instability,
product collapse, and/or serious injury.
>DO NOT allow children to climb on unit.
>Put heavier items on lower shelves.
>Recommended to install the appliances
from the back of unit.
Customer Service
Tel/Fax: 281.500.9372
Toll Free: 773.299.8111 (Mon - Fri 9am - 5pm)
Email: support@furinno.com
www.furinno.com
1305420150327
Page 2
No Hardware List
Screw M4x32mm
1
Qty
16pcs
No QtyParts List
Top Panel
A 1pc
STEP 1
Insert Dowel (2) to Panel (D) with Glue (8).
Tighten Bracket (10) to Panel (D) with Screw (11).
STEP 2
Install Insert Cap (4) to Panel (A) with hammer.
Dowel
2
Square Long Pole
3
Insert Cap
4
Square Leg
5
Top Cap
6
Non-Wooven Bin
7
White Glue
8
Screw Cap Cover
9
L-Bracket
10
Screw M3.5x10mm
11
8pcs
4pcs
4pcs
5pcs
1pc
2pcs
1pc
4pcs
4pcs
8pcs
Bottom Panel
B 1pc
Shelf Panel
C
Leg Panel
D 4pcs
1pc
STEP 3
Attach Panel (D) to Panel (A) with
Screw (11) & Glue (8), as shown.
USEFUL HINTS BEFORE YOU START:
1. Read each step carefully before starting.
2. It is important that each step is performed in correct order to avoid difficulties.
3. Identify, sort and count the parts before assembly.
4. Assemble your furniture on packaging cardboard to prevent scratch or damage.
5. Clean the product with mild cleanser using soft damped cloth. Do not use harsh or abrasive cleanser.
6. Using uncompatible hardware might cause damage to product.
STEP 4
4.1 Attach Panel (C) to Panel (D) with Screw (1).
4.2 Tighten Poles (3) to Insert Cap (4).
Loading...