Ebern Designs W006111698 Installation & Assembly

Page 1
Assembly Instruction
T3 ier Shelf Bookcase
No Hardware List Qty No QtyParts List
Top Panel
Small Screw
1
Mini Fix Cam
2
Mini Fix Bolt
3 8pcs
4pcs
8pcs
A 1pc
Bottom Panel
B
C
Shelf Panel
1pc
2pcs
Approx. 30 minutes
Recomm. 2 Person
Tool RequiredTool Required
Wall Mounting Set
4 1set
Shelving Support
5
L Bracket
6
Power Pin
7 28pcs
8pcs
2pcs
Bottom Bar
D
Left Side Panel
E
Right Side Panel
F
Back Panel
G 1set
1pc
1pc
1pc
Wall Plug
STEP 1
Insert Mini Fix Cam (2) to Panel (A&B), as shown.
USEFUL HINTS BEFORE YOU START:
1. Read each step carefully before starting.
2. It is important that each step is performed in correct order to avoid difficulties.
3. Identify, sort and count the parts before assembly.
4. Assemble your furniture on packaging cardboard to prevent scratch or damage.
6. Using uncompatible hardware might cause damage to product.
STEP 3
Insert Mini Fix Bolt (3) into Panel (E) & (F) using screwdriver.
(2) x 8pcs
(3) x 8pcs
STEP 2
2.1 Install L Bracket (6) to Bar (D) with Small Screw (1).
2.2 Attach assembled unit to Panel (B) with Small Screw (1).
F
E
STEP 4
Attach Panel (F) to assembled unit in Step 2, as shown.
STEP 2.1
STEP 2.2
TightenStart
Page 2
STEP 5
Attach Panel (A) to Panel (F), as shown.
STEP 7
Attach Panel (G) to the back of the assembled unit using Power Pin (7).
(7)x 28pcs
TightenStart
STEP 6
Attach Panel (E) to Panel (A&B), as shown.
STEP 9
STEP 8
8.1 Insert Shelving Support (5) to the pre-drilled holes on Panel (E&F).
8.2 Insert Shelf Panel (C) to the unit, as shown.
TightenStart
Recommended Maximum Weight
Fix the unit to the wall using Wall Mounting Set (4) to prevent unit from falling.
IMPORTANT: In order to prevent product tip over, please secure the unit to the wall.
WARNING:
>This unit has been designed to support the maximum loads shown. Exceeding these load limits could cause sagging, instability, product collapse, and/or serious injury.
>DO NOT allow children to climb on unit.
>Put heavier items on lower shelves.
Loading...