Page 1
Mobile Bookcase Assembly Instructions
Read all instructions and review illustrations before assembly.
Before you begin:
Open, identify, and count all parts prior to assembly. Two people are required to safely assemble.
Components and Hardware:
(40) Hex Screws
(4) Large
Spring Washers
(1) Allen Key
(40) Hex Nuts
(40) Small
Spring Washers
(1) Wrench
Attach Shelves to Leg Supports:
Position (2) Leg Supports and a Shelf onto a flat
1.
surface as shown in
To attach Shelf to Leg Supports insert Hex Screws
2.
through the screw holes for both the Leg and Shelf,
and hand tighten a Nut and Small Spring Washer onto
each Hex Screw.
Figure 1
.
(2)Wheels
(5) Shelves
(4) Leg Supports
(2) Locking Wheels
Shelves
Figure 1
Tighten the Nuts onto the Hex Screws using the
3.
supplied Wrench and Allen Key.
Repeat steps 2 through 3 to attach the remaining
4.
Shelves.
Figure 2
Figure 2
Wrench
Hex Nut
Small Spring
Washer
Hex Screw
Allen Key
Leg Supports
Page 1 of 2
Page 2
Attach Shelves to Leg Supports (cont.):
Position the remaining Leg Supports on top of
5.
the Shelves.
Insert a Hex Screw through the screw hole for
6.
both the Leg Supports and Shelf, and hand
tighten a Nut and Small Spring Washer onto
each Hex Screw.
Tighten the Nuts onto the Hex Screws using the
7.
supplied Wrench and Allen Key.
Repeat steps 6 and 7 to attach the remaining
8.
Shelves.
Rotate the unit and repeat Steps 6 and 7 to
9.
install the remaining Hex Screws into the unit.
Figure 3
Figure 4
Wheels
Figure 3
Leg Supports
Shelves
Large Spring
Washer
Wrench
Wheels
Attach Wheels:
Attach a Wheel and a Large Spring Washer
10.
to the bottom of the Leg Support.
Using the provided wrench, rotate the
11.
Wheel clockwise until tight.
Repeat steps 10 and 11 to attach the
12.
remaining Wheels.
Carefully place bookcase upright.
13.
Figure 5
Large Spring
Washer
Figure 4
Figure 5
Page 2 of 2
Loading...