Page 1
STEP 5
Attach Panel (E) with Power Pin (5).
STEP 6
Install Nail Leg (3) to the bottom
of Panel (D) with Rubber Mallet.
Assembly Instruction
Basic 3-Tier Bookcase Storage
Shelves
Approx. 30 minutes
Recomm. 2 Person
Recommended Maximum Weight
15
15
15
15
*Unit in Pound(lbs)
D
Tool RequiredTool Required
WARNING:
>This unit has been designed to support the
maximum loads shown. Exceeding these
load limits could cause sagging, instability,
product collapse, and/or serious injury.
>DO NOT allow children to climb on unit.
>Put heavier items on lower shelves.
Page 2
No Hardware List Qty No QtyParts List
Shelf Panel
Long Screw
1
Short Screw
2
3
Nail Leg
16pcs
4pcs
4pcs
A 3pcs
Bottom Panel
B
Bottom Bar
C
STEP 1
1.1 Install L-Bracket (4) to Panel (C) with Screw (2).
1.2 Attach Panel (C) to Panel (B) and tighten with Screw (2).
1pc
1pc
4
5
L-Bracket
Power Pin
2pcs
20pcs
L/R Side Panel
D
Back Panel
E
2pcs
3pcs
STEP 2
Attach Panel (A) to Panel (D) and tighten with
Long Screw (1).
finished edge
A
unfinished
1
1
1 x 2pcs
surface
D
STEP 4
STEP 3
Attach Panel (A) & (B) to Panel (D) and tighten
with Long Screw (1).
finished edge
A
A
D
1 x 6pcs
B
USEFUL HINTS BEFORE YOU START:
1. Read each step carefully before starting.
2. It is important that each step is performed in correct order to avoid difficulties.
3. Identify, sort and count the parts before assembly.
4. Assemble your furniture on packaging cardboard to prevent scratch or damage.
5. Clean the product with mild cleanser using soft damped cloth. Do not use harsh or abrasive cleanser.
6. Using uncompatible hardware might cause damage to product.
Attach assembled unit to another Panel (D) and tighten with Long Screw (1), as shown.
finished edge
1 x 8pcs
A
A
D
A
B
Loading...