Page 1
SUPER CUBE
Included
8 Pins
1 Backer Board
thin and has no adhesive
WARNING: CHOCKING HAZARD
Small parts NOT for children under 3 years
2 Vertical zBoards
adhesive strips on 2 edges
2 Horizontal zBoards
with grooves
• Assemble your unit on a flat even surface, carpet not recommended
• Furniture is for indoor use only
1 Carefully remove the 3M
protective layer from adhesive.
• When moving your furniture, lift from the bottom
• Make sure zBoard surfaces are clean and dry
2 Place alignment pins
2
2
in vertical zBoards.
Important
THIS SIDE UP
Tip Start assembly from bottom to top.
DO NOT place unit on its side or back as
it will compromise its structural integrity.
3
Align vertical zBoards and backer
board to horizontal zBoard.
Align horizontal zBoard and press firmly to secure
4
unit together. Enjoy building possibilities!
Loading...