Page 1
STEP 4
Attach Panel (A) to assembled unit and tighten Mini Fix Cam (3), as shown.
Recommended Maximum Weight
Approx. 20 minutes
Recomm. 1 Person
Tools Required
Assembly Instruction
Simplistic Study Table
20
*Unit in Pound(lbs)
WARNING:
>This unit has been designed to support the
maximum loads shown. Exceeding these
load limits could cause sagging, instability,
product collapse, and/or serious injury.
>DO NOT allow children to climb on unit.
>Put heavier items on lower shelves.
Page 2
No Hardware List Qty
Dowel
1
Screw
2
4pcs
8pcs
No QtyParts List
Top Panel
A 1pc
Left Side Panel
B
1pc
STEP 1
Insert Mini Fix Bolt (4) into the pre-drilled
holes on Panel (A).
STEP 2
2.1 Install Dowel (1) and Nail Leg (5) into
Panel (B) & (C), as shown:
2.2 Install Mini Fix Cam (3) into the pre-drilled
holes on Panel (B) & (C).
Mini Fix Cam
3
Mini Fix Bolt
4 4pcs
Nail Leg
5 4pcs
4pcs
Right Side Panel
C
Center Bar
D 2pcs
1pc
Note: Arrow on Mini Fix
Cam should be pointing
outward.
STEP 3
3.1 Attach Panel (D) to Panel (C) with Screw (2).
3.2 Attach Panel (B) to the assembled unit with Screw (2), as shown.
USEFUL HINTS BEFORE YOU START:
1. Read each step carefully before starting.
2. It is important that each step is performed in correct order to avoid difficulties.
3. Identify, sort and count the parts before assembly.
4. Assemble your furniture on packaging cardboard to prevent scratch or damage.
5. Clean the product with mild cleanser using soft damped cloth. Do not use harsh or abrasive cleanser.
6. Using uncompatible hardware might cause damage to product.
STEP 3.2
STEP 3.1
Loading...