Page 1
ASSEMBLY INSTRUCTION
Low Bookshelf
RF10003
RF40001
F
C
A
LIST OF WOODEN PARTS
NO
DESCRIPTION
LEFT PANEL
A
RIGHT PANEL
B
SHELVES
C
MANTEL TOP
D
BACK CROSSBARS
E
MANTEL TOP CROSSBARS
F
A
A
D
Diagram 2.
B
E
C
C
B
E
RF10003
RF40001
Diagram 1.
Step 2. Attach right panel (Part B) into them by using
screws JCA 1/4" x 32 (RF10003).
You may cover up screw holes with the
enclosed wood plugs (RF40001) as per Diag.2.
D
RF10003
Q'TY
1
1
2
1
2
2
E
Step 1. Lay the left panel (Part A) on a soft surface .
Then attach shelves ( Part C) by using screws
JCA 1/4" x 32 (RF10003) and attach back crossbars
(Part E) into left panel (Part A ).
Make sure the tapered edge faces upward.
BECAREFUL,DO NOT OVER TIGHTEN THE SCREWS.
You may cover up screw holes with the enclosed wood
plugs (RF40001) as per Diag.1.
RF10002
F
LIST OF HARDWARE
RF10003
RF10002
RF40001
RF40103
RF10003
SCREW JCA 1/4" x 32
SMALL SCREWS
WOOD PLUGS
HEXAGONAL WRENCH
RF10002 RF40001
12
6
12
1
RF40103
D
Diagram 3.
Step 3.Attach mantel top crossbars (Part F)into the
mantel top (Part D)by using small screws
(RF10002) as per Diag.3.The side with larger hole
should face away from the top.
RF40001
Diagram 4.
Step 4. Lift the mantel top and set it on top of
the bookcase. Fasten with screws
JCA 1/4" x 32(RF10003).
You may cover up screw holes with the
enclosed wood plugs (RF40001).as per Diag.4.
Loading...