Top Scroll Top Scroll
SCREWS
(X27 plus 2 Extra)
PARTS LIST
F
SHELF F (X3)
E
SHELF E (X3)
D
SHELF D (X3)
C
SHELF C (X3)
B
SHELF B (X3)
60”
HT. 6 Shelf Cookware Stand
NUT BOLTS
(X27 plus 2 Extra)
F
Upper Stand
Upright
E
D
C
B
Lower Stand
Upright
F
Upper Stand
Upright
F
E
E
D
D
C
C
B
B
Lower Stand
Upright
A
UPPER STAND
UPRIGHTS (X3)
SHELF A (X3)
LOWER STAND
UPRIGHTS (X3)
Assembly
1. Unwrap all parts. Sort out the shelf components into 6 sets of
3 shelf sections each of equal size (from "A" to "F", largest to
smallest).
2. Locate the 3 lower stand uprights (these will have at feet on
one end) and shelf set "C". Using only the bottom row of holes
on each shelf set, attach shelf section "C" to the lower stand
uprights. Use 2 sets of screws and nuts for each joint and
hand-tighten. Take care to keep all screw and nut sets going
in the same direction.
3. Locate the 3 upper stand uprights (these will have scrolls on
one end). Attach to shelf section "C", using 2 sets of screws
and nuts for each joint. Take care to keep all screw and nut sets
going in the same direction. Tighten all screw/nut sets.
4. Attach shelf sections "A", "B", "D", "E" & "F" to the upper &
Decor Copper Finish: The copper plating has been given a
clear, protective coating to prevent tarnishing. Clean with a soft,
damp cloth. You can also use a window cleaner. Dry thoroughly.
Never use abrasive cleaners.
Satin Nickel Finish: The nickel plating has been given a clear,
protective coating to prevent tarnishing. Clean with a soft,
damp cloth. You can also use a window cleaner. Dry thoroughly.
Never use abrasive cleaners.
Chrome Finish: Clean with a soft, damp cloth. You may also use
a window cleaner. Dry thoroughly. Never use abrasive cleaners.
Powder Coat Finish: Clean with a sponge, moistened with
dishwashing solution. Dry thoroughly. Never use abrasive
cleaners.
A
A
Flat Feet
Care and Use
lower stand uprights, using one screw/nut set at each joint. Take
care to keep all screw and nut sets going in the same direction.
Hand-tighten only.
5. Square up the stand so that the feet sit at upon oor and all
shelves are straight. Tighten all screws and nuts.
Warning:
It is important that your rack is properly assembled and mounted.
If the rack is incorrectly assembled, mounted or used it could become unstable
or collapse, possibly causing damage or injury.
A
Loading...