Caution : You must read this before you proceed
Snack Table
Before Beginning
Part List
Label Picture Description QTY
Assembly Instructions
A Snack Table 1
Hardware
Label Picture Description QTY
①
Assembly Preparation
Assembly:
Bolt (M6*30mm) 3
1 OF 3
Assembly Steps
Step 1
Step 2
Open the carton and place the Snack Table ont o a clean, non- m ar ring surface as shown in Picture
Attach the Table Leg onto the surport bar on the table top using Bolt（①）as above picture show.
Fully tighten the Bolts.
Turn the Snack Table up.
Your Snack Table is ready for use.
This Snack Table can only be used on a flat, level surf ace.
2 OF 3
Do not clean furniture with harsh cleansers or polish.
Do not put hot items directly on furniture surface
To obtain the longest lifespan of your outdoor prodcts, minimizing exposure to
direct sunlight is recommended.
Children should not climb or jump on the furniture.
Do not write on furniture without a padded barrier to protect the surface.
To obtain the longest lifespan of your outdoor products, avoid extended and
lengthy exposure to rain, snow, and direct sunshine. Whenever possible cover the
product and /or place under patio or awnings.
Not for commercial use. For residential use only .
Stains may be removed with mild soap solution and damp cloth.
Keep away from sources of ignition.
Dust and pick-up spills using a clean, non-colored, lint-free cloth .
3 OF 3
Loading...