Assembly Instruction
Dining chair
Your furniture requires assembly prior to use. It is important that you read the entire assembly instructions
to become familiar with the unit before you set up this product.
Safety Warning and Precautions
WARNING: When setting up your furniture, basic precautions should always be followed to reduce risk of
personal injury and damage to the product.
Read all instructions before assembly and usage this product.
1. Select ideal location. Set out all parts on a clear and level surface prior to assembly. Ideally, the furniture
should be set up in the desired location to avoid moving it after assembly.
2. Use caution. During all the processes of assembling, especially when lifting heavy or large parts, pay
attention to safety.
3. Tools and Assistance. An adjustable spanner is required for assembly. It is recommended 2 people assist
with assembly.
4. Check all parts before assembling, ensure you have all parts detailed in the parts list on Page 2.
5. Refer to assembly diagram. During assembly, refer to the assembly instructions on following pages.
6. Caution. Keep children away from work area during assembly. Do not allow children to handle parts or
tools while assembling.
Assembly Instruction
Dining chair
PANEL AND FITTINGS IDENTIFICATION
Part # A B C D
Description: Armrest Armrest Seat Panel Back Panel
Figure:
Qty: 1 1 1 1
HARDWA RE LIST
Part # E F G H
Description: Bolt M6 x 20mm Bolt M6 x 15mm Flat washer Washer
Figure:
Qty: 6 4 10 10
Part # I
Description: Allen Key
Figure:
Qty: 1
Step 1
Assembly Instruction
Dining chair
Step 2
Step 3
Steps:
1. Connect the armrest(Part A&B) and the seat(Part C) with bolt(Part E), flat washer(Part G) and washer
(Part H). Tighten all bolts.
2. Connect the back (Part D) and the seat & armrests with bolt(Part F), flat washer and washer. Tighten all
bolts.
3. Thechairisreadytouse.
Periodically check and make sure that all bolts are fully tightened
Loading...