LED Vanity Bar
ASSEMBLY INSTRUCTIONS
REMOVE ALL PARTS FROM PACKAGE, BE CAREFUL NOT
TO DAMAGE ANY COMPONENTS.
PROFESSIONAL INSTALLATION RECOMMENDED
LED Vanity Bar
REMOVE ALL PARTS FROM PACKAGE, BE CAREFUL NOT TO DAMAGE ANY COMPONENTS.
F
C
x4
Measure area and determine desired mounting height.
1.
2.
Detach mounting plate [A] from backplate [B] by
E
x2
removing backplate screws [C].
3.
Mounting plate [A] will attach to junction box.
Place glass shade [F] over integrated LED strip [D].
4.
Position shade [F] so that the holes on the metal shade
brace align with holes on back of the integrated LED
strip [D], secure with shade screws [E].
5.
Install light to wall. We recommend installa-tion by a
qualified electrical professional. Secure light to ball by
replacing backplate screws [C].
B
D
F
C
E
C
B
A
E
D
A
F
Note: Turn off switch before replacing the bulb. Make sure the bulb has sufficient time to cool down.
Do not subject the lamp to any shock while lit as shattering of glass shade may result.
E
D
Loading...