ASSEMBLY INSTRUCTIONS
INSTRUCCIONES DE ENSAMBLE
Height: 28,74 in
Width: 47,24 in
Depth: 23,62 in
IF ANY PARTS ARE BROKEN OR MISSING
PLEASE CONTACT US FIRST,
OUR CUSTOMER SERVICE TEAM WILL
PROVIDE YOU HELP TO RESOLVE
ANY ISSUES IMMEDIATELY
Alto: 73 cm
Ancho: 120 cm
Fondo: 60 cm
DESK
Escritorio
!
IMPORTANT
RECOMMENDATIONS
Do not paint the cabinet.
The cabinet MUST be used exclusively indoors,
do not expose to direct sun.
Clean metallic hardware with a dry cloth.
Do NOT overload the cabinet (see suggested loads).
Do not hit or hammer the cabinet (just when
indicated).
RECOMENDACIONES
IMPORTANTES
No pintar el mueble.
El mueble debe ser usado únicamente en interiores,
no exponer al sol directo.
Limpiar los herrajes metálicos con un paño seco.
NO sobrecargar el mueble (ver las cargas sugeridas).
No golpear ni martillar el mueble (solo cuando se
indique).
Clean with a slightly damp cloth, use gentle soaps.
Do not drag, lift and move between two people.
Avoid direct contact with water, fire or exposure
to heat sources.
!
WARNING
Never allow children to climb or manipulate
the cabinet, furniture tip over can cause
serious injuries or death.
Limpiar con un paño ligeramente húmedo,
usar jabones suaves.
No arrastre el mueble, levántelo entre dos personas.
Evite el contacto directo con el agua, el fuego o la
exposición a fuentes de calor.
!
ADVERTENCIA
Nunca permita que los niños escalen o
manipulen el mueble, la caída de este
puede provocar lesiones graves o la muerte.
INDEX
ÍNDICE
Assembly Hardware
Assembly Parts
Suggested Loads 6
Assembly Recommendations 6
Assembly Steps
Warranty 15
4
5
7-14
REQUIRED TOOLS*
Herrajes para Armado
Piezas de Armado
Cargas Sugeridas 6
Recomendaciones de Ensamble 6
Pasos de Armado
Garantía
4
5
7-14
15
HERRAMIENTAS NECESARIAS*
*Not included, and not shown actual size.
Page 3
*No incluidas y no se muestran en tamaño real.
ASSEMBLY HARDWARE HERRAJES PARA ARMADO
Please check that the hardware content is correct.
If any item is missing, please call to our customer
service line.
x29
Wood Dowel
Tarugo
x18
Spreading Bolt
Perno Minifix
Compruebe que el contenido de los herrajes sea
el correcto. En caso de que falte alguna pieza, por
favor llame a nuestra línea de atención al cliente.
x18
Minifix Cams
Minifix
x30
Cover Caps
Tapa Adhesiva
Minifix
x1
Glue
Pegante
x8
Flat Head Screw
Tornillo Lámina
Hardware items are NOT shown actual size.
Los herrajes no se muestran en tamaño real.
Tornillo de Ensamble
x10
2" Drywall Screw
2"
x4
Corner Brace
Cantonera
Page 4
ASSEMBLY PARTS PIEZAS DE ARMADO
A
F
H
G
E
D
C
B
D
E
C
B
Page 5
A - x1
B - x2
C - x2
D - x2
E - x2
F - x1
G - x1
H - x1
MAX SUGGESTED LOADS
CARGAS MÁXIMAS SUGERIDAS
110lb
ASSEMBLY
RECOMMENDATIONS
50kg
RECOMENDACIONES
DE ENSAMBLE
Two people are recommended to assemble
the product.
Assemble the cabinet on a flat, smooth
surface, preferably on a carpeted floor
or the carton box of the product.
Carefully read the assembly instructions
and identify every wood and hardware
part before start assemblying the cabinet.
Page 6
Ensamble el mueble entre dos personas.
Ensamble el mueble sobre una superficie
plana y lisa, preferiblemente sobre un
tapete o el cartón de la caja
Lea cuidadosamente las instrucciones e
identifique todas las piezas y herrajes
antes de empezar a armar el mueble.
1
x2
B
2
x2
C
Page 7
1
2
3
3
x2
D
4
x2
E
1
2
3
Page 8
5
F
6
G
Page 9
7
2"
E
F
C
D
8
2"
Gently hit to adjust.
Golpee suavemente
para ajustar.
D
C
G
E
Page 10
9
E
F
C
D
B
Rotate to tigten.
Gire para apretar.
10
B
C
E
Gently hit to adjust.
Golpee suavemente
para ajustar.
D
G
Page 11
11
H
12
2"
D
F
C
1
B
E
2
3
H
G
D
Page 12
E
C
13
A
Page 13
14
Rotate to tigten.
Gire para apretar.
Gently hit to adjust.
Golpee suavemente
para ajustar.
Page 14
After you finish the adjustment
of the cams, cover them with
the cover caps.
Después de ajustar todas las
cajas minifix, cúbralas con las
tapas adhesivas.
A
After you finish assembling the
cabinet, take off the adhesive
letters.
Al terminar de armar, desprenda
las letras adhesivas.
WARRANTY POLICY
PÓLIZA DE GARANTÍA
Our Furniture has a 3 year warranty coverage in wooden parts and 1 year warranty
coverage in hardware pieces since its manufacturing date, which you can see in the lot
number printed on the product box and the assembly instructions leaflet.
Warranty covers materials and workmanship imperfections which impair the assembly or
correct functioning of the cabinet.
This warranty is not valid if the defects or imperfections are caused by the incorrect
following of the assembly instructions, warnings and recommendations, misuse,
intentional damage, fire or flood, or after modifications or any kind of alteration, or
repaired by someone not authorized by our company, when it is been assembled 3
months after the date of purchase. These defects MUST be reported before the warranty
coverage period ends. Once the product has been assembled, the company will not be
responsible for defective and/or damaged parts.
This warranty is ONLY valid for the ORIGINAL PURCHASER, it doesn’t apply if the
product has been resold, rented, etc.
We will take no liability for incidental or consequential damages caused to or by the
product (This may not apply in your state).
To make this warranty valid you must write to our customer service email describing the
product defect, lot number and submitting your sales receipt or proof of purchase, or
contact us at our customer service line. Replaced parts will be under the products
original warranty coverage period. Damaged parts will become property of the
company.
There are no other warranties applicable to this product.
Page 15
Loading...