Ebern Designs W002360909 Assembly Instructions

Caution : You must read this before you proceed
LEFT ARM SOFA
Label Picture Description QTY
A Backrest 1
B Seat Cushion 1
C Chaise Seat Frame 1
D Left Arm 1
Page 1 OF 8
E Back Cushion 1
Before
F Leg 5
Label Picture Description QTY
Bolt(M8*60MM) 5 Bolt(M8*20MM) 2
Washer 6
Allen Key 1
W asher Ring 6
Connecting Piece 1
Gasket 8
Beginning Assembly:
Page 2 OF 8
Step 1
OVERVIEW
Seat Cushion(B)
Backrest(A)
Left Arm(D)
Chaise Seat Frame (C)
Left Arm(D)
FRONT FACING
Back Cushion(E)
Backrest(A)
Leg (F)
This Sofa has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Sofa parts, the above picture is to help you put the various Sofa parts into perspective. Please read through the instructions to familiarise yourself with the parts and steps before assembly.
Chaise Seat Frame (C)
Chaise Seat Frame (C)
Uncover the non-woven Fabric and remove Backrest(A),Left Arm(D),Hardware package from bottom of the Chaise Seat Frame(C) as shown.
Page 3 OF 8
Step 2
Step 3
2.1
2.2
Chaise Seat Frame(C)
Backrest(A)
Step2.1 Position Backrest(A) to Chaise Seat Frame(C) as Shown. Step2.2 Attach the Backrest(A) to Chaise Seat Frame(C) using Bolt() , Washer Ring() , Washer() with Allen Key().
3.1
Chaise Seat Frame(C)
Left Arm(D)
3.2
Page 4 OF 8
Step 4
Step 5
Step3.1 Position Left Arm(D) to Chaise Seat Frame(C) as Shown. Step3.2 Attach the Left Arm(D) to the Chaise Seat Frame(C) using Bolt () , Washer Ring (), Washer () with Allen Key().
Chaise Seat Frame(C)
Attach the Connecting Piece ()to Chaise Seat Frame(C) using Bolt( Ring() , Washer () with Allen Key() until tight.
Chaise Seat Frame(C)
) , Washer
Cover the bottom of the Chaise Seat Frame(C) with the non-woven fabric. Smooth down the Magic Tape on all four sides of the Seat by hand.
Page 5 OF 8
Step 6
Step 7
Chaise Seat Frame(C)
Leg (F)
Leg (F)
()
Install the Legs(F) into the bottom of Chaise Seat Frame(C) by placing a Gasket(⑦) onto the threaded stem of the Legs. And then insert the threaded stem into the threaded mounting position at each Corner of Chaise Seat Frame(C). Tighten by turning the Legs clockwise.
Note: The usage of Gaskets(⑦) are OPTIONAL and are especially useful to help alleviate slight wobbles. Some Legs may need more than one Gasket whilst some Legs may not need any.
Position Sofa right side up and test for stability on a Level Surface. Add or remove Gaskets() where needed to achieve stability.
7.1
Seat Cushion(B)
7.2
Back Cushion(E)
Chaise Seat Frame(C)
Step 7.1 Put the Seat Cushion(B) on the Chaise Seat Frame(C) as shown. Step 7.2 Put the Back Cushion(E) on the Chaise Seat Frame(C) as shown.
Page 6 OF 8
Step 8
Step 9
Your Left Arm Sofa is ready for use. Your Left Arm Sofa can only be used on a flat, level surface.
If you already purchased 2 or more than 2 products, Please read on.
Connecting the two sofas by using the pre-fixed Connecting Piece(⑥) as shown in above picture.
Page 7 OF 8
Page 8 OF 8
Loading...