Label Picture Description QTY
A Top Panel 1
B Left Side Panel 1
C Right Side Panel 1
D Long Center Panel 1
E
Left Short Center
Panel
1
Caution : You must read this before you proceed
TV CABINET
Page 1 OF 13
F
Right Short Center
Panel
1
G Left Middle Panel 1
H Right Middle Panel 1
I Door Panel 1
J Back Panel 1
K Bottom Panel 1
L Handle 2
M Metal Leg 5
Label Picture Description QTY
① Cam Lock 15
② Cam Bolt 15
③ Cam Cap 15
④
Positioning Dowel
(8*30mm)
25
⑤
Cap Wood Screw
(6*50mm)
11
Page 2 OF 13
⑥ Screw (3.5*16mm) 24
⑦ Screw (4*32mm) 3
⑧ Nail 31
⑨ Allen Key 1
⑩ Connector 2
⑪
Screwdriver
(not provided)
1
⑫
Hammer (not
provided)
1
Before
Beginning
Assembly:
X 15
X 15
X 15
X 25
X 11
X 24
X 3
X 31
X 1
X 2
X 1
X 1
X 2
X 5
Page 3 OF 13
Step 1
1.1) Unpack and place all parts on a clean, non-marring surface.
1.2) Attach Cam Bolts(②) to mounting positions on Top Panel(A)
with Screwdriver(⑪).
This TV Cabinet has multiple parts and may require up to 60
minutes to assemble. To give you an overview of the TV Cabinet
parts, the above picture is to help you put the various parts into
perspective. Please read through the instructions below to
familiarise yourself with the parts and steps before assembly.
Overview
FRONT FACING
Top Panel (A)
Left Side Panel (B)
Back Panel (J)
Right Side Panel (C)
Door Panel (I)
Long Center Panel (D)
Left Short
Center Panel
(E)
Right Short
Center
Panel (F)
Left Middle
Panel (G)
Right Middle Panel (H)
Bottom Panel (K)
⑪
A
②
②
②
②
②
②
Knob Handle(L)
Metal Leg(M)
Page 4 OF 13
Step 2
Step 3
Step 4
3.1) Insert Cam Locks(①) into mounting positions on Right Side
Panel(C) by hand.
3.2) Insert Positioning Dowels(④) into mounting positions on Right
Side Panel(C) by hand.
4.1) Insert Cam Locks(①) into mounting positions on Long Center
Panel(D) by hand.
4.2) Insert Positioning Dowels(④) into mounting positions on Long
Center Panel(D) by hand.
4.3) Attach Cam Bolts(②) to mounting positions on Long Center
Panel(D) with Screwdriver(⑪).
2.1) Insert Cam Locks(①) into mounting positions on Left Side
Panel(B) by hand.
2.2) Insert Positioning Dowels(④) into mounting positions on Left
Side Panel(B) by hand.
B
④
④
④
④
①
①
①
①
④
④④④
⑪
②
②
①
⑪
②
①
④
D
4.1
4.2
4.3
C
①
①
④
④
④
④
①
④
3.1
3.2
④
2.1
2.2
Page 5 OF 13
Step 5
Step 6
Step 7
5.1) Flip Long Center Panel(D) to the opposite face.
5.2) Attach Cam Bolts(②) to mounting positions on Long Center
Panel(D) with Screwdriver(⑪).
6.1) Insert Cam Locks(①) into mounting positions on Left Short
Center Panel(E)by hand.
6.2) Insert Positioning Dowels(④) into mounting positions on Left
Short Center Panel(E) by hand.
7.1) Insert Cam Locks(①) into mounting positions on Right Short
Center Panel(F) by hand.
7.2) Insert Positioning Dowels(④) into mounting positions on Right
Short Center Panel(F) by hand.
④
④
④
④
①
①
E
④
6.1
6.2
④
④
④
①
①
④
④
①
F
7.1
①
7.2
Page 6 OF 13
Step 8
Step 9
9.1) Insert Cam Locks(①) into mounting positions on Right Middle
Panel(H) by hand.
9.2) Insert Positioning Dowels(④) into mounting positions on Right
Middle Panel(H) by hand.
9.3) Attach Cam Bolts(②) to mounting positions on Right Middle
Panel(H) with Screwdriver(⑪).
8.1) Insert Cam Locks(①) into mounting positions on Left Middle
Panel(G) by hand.
8.2) Insert Positioning Dowels(④) into mounting positions on Left
Middle Panel(G) by hand.
8.3) Attach Cam Bolts(②) to mounting positions on Left Middle
Panel(G) with Screwdriver(⑪).
④G②
⑪
①
①
④
8.1
8.2
8.3
⑪
H
②
②
④
④
①
①
①
④
②
②
⑪
9.1
9.2
①
④
9.3
⑪
②
Page 7 OF 13
Step 10
Step 11
10.1) Insert Positioning Dowels(④) from Left Side Panel(B), Right
Side Panel(C) and Long Center Panel(D) into mounting positions
on Top Panel(A).
Note: Ensure the arrows on Cam Locks head points towards
the Cam Bolt mounting positions.
10.2) Insert the mounting positions on sides of Left Side Panel(B),
Right Side Panel(C) and Long Center Panel(D) onto Cam
Bolts(②) on Top Panel(A).
10.3) Turn the Cam Locks(①) clockwise with the Screwdriver(⑪)
until they all lock into place.
11.1) Insert Positioning Dowels(④) from Left Middle Panel(G) and
Right Middle Panel(H) into mounting positions on Long Center
Panel(D).
Note: Ensure the arrows on Cam Locks head points towards
the Cam Bolt mounting positions.
11.2) Insert the mounting positions on sides of Left Middle
Panel(G) and Right Middle Panel(H) onto Cam Bolts(②) on Long
Center Panel(D).
11.3) Turn the Cam Locks(①) clockwise with the Screwdriver(⑪)
until they all lock into place.
⑪
①
⑪
②
④
B
C
D
D
G
H
⑪
④
②
10.2
10.1
10.3
11.1
11.2
11.3
A
④
①
①
②
Page 8 OF 13
Step 12
Step 13
13.1) Insert Positioning Dowels(④) from Left Side Panel(B), Right
Side Panel(C), Long Center Panel(D), Left Short Center Panel(E)
and Right Short Center Panel(F) into mounting positions on
Bottom Panel(K).
13.2) Attach Bottom Panel(K) to Cabinet Assembly using Cap
Wood Screws(⑤) with Allen Key(⑨).
12.1) Insert Positioning Dowels(④) from Left Short Center
Panel(E) and Right Short Center Panel(F) into mounting positions
on Left Middle Panel(G) and Right Middle Panel(H).
Note: Ensure the arrows on Cam Locks head points towards
the Cam Bolt mounting positions.
12.2) Insert the mounting positions on sides of Left Short Center
Panel(E) and Right Short Center Panel(F) onto Cam Bolts(②) on
Left Middle Panel(G) and Right Middle Panel(H).
12.3) Turn the Cam Locks(①) clockwise with the Screwdriver(⑪)
until they all lock into place.
⑪
①②④
G
H
E
F
⑪
K
⑨
⑤
12.1
12.2
12.3
④
13.1
13.2
C
Arrow
NOTE
Cam Bolt
Mounting Position
④
①
①
②
⑤
Page 9 OF 13
Step 14
Step 15
Step 16
Position the Cabinet with the Back Panel(J) facing skywards.
Attach Back Panel(J) to Cabinet Assembly using Nails(⑧) with
Hammer(⑫).
Caution: Please be extra careful when using a hammer to
avoid injury.
Note: Hit Nails along all four edges (slightly inwards from
sides) on the lines drawn on the Back Panel(J).
Attach Connectors(⑩) to Door Panel(I) with Screws(⑥) using
Screwdriver(⑪).
Tighten the Screws fully in a sequential manner.
Note: There are pre-existing mounting positions on Door
Panel(I) to attach the Connectors.
Attach Metal Leg(M) to Bottom Panel(K) using Screws(⑥) with
Screwdriver(⑪).
Tighten the Screws fully in a sequential manner.
Note: Use the pre-existing mounting positions on Bottom
Panel(K) to attach Metal Legs(M).
⑧
K
⑪
⑥
M
⑪
⑪
⑩
⑩
⑥
I
⑩
⑥
⑫
J
⑫
15.2
Page 10 OF 13
Step 17
Step 18
18.1) Attach Connectors(⑩) to Bottom Panel(K) with Screws(⑥)
using Screwdriver(⑪).
Tighten the Screws fully in a sequential manner.
18.2) Rotate first screw on Connectors(⑩) to adjust up-down
position of Door Panel(I) when necessary.
18.3) Rotate second screw on Connectors(⑩) to adjust in-out
position of Door Panel(I) when necessary.
Note: There are pre-existing mounting positions on the
Bottom Panel(K) to attach the Connectors.
Attach Handles(L) to Door Panel(I) with Screws(⑦) using
Screwdriver(⑪).
Tighten the Screws fully in a sequential manner.
Note: There are pre-existing mounting positions on the Door
Panel(I) to attach the Handles.
⑦
⑪
I
L
⑪
⑩
K
18.1
⑪
⑩
⑥
⑩
⑪
18.2
18.3
Page 11 OF 13
Step 19
Step 20
Your TV Cabinet is ready for use.
This TV Cabinet can only be used on a flat, level surface.
Attach Cam Caps(③) to all Cam Locks(①) by hand.
③
①
③
③
③
Page 12 OF 13
Page 13 OF 13
Loading...