Page 1
INSTALLATION INSTRUCTIONS
WALL SERIES
Installation recommended to be done by a professional electrician and must be
in accordance with local codes of the National Electrical Code (NEC)
THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE
INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND
OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
TOOLS REQUIRED FOR INSTALLATION:
Pliers, Wire strippers, Flathead Screwdriver, Philips Screwdriver
WARNING: TO REDUCE THE RISK OF FIRE OR INJURY TO PERSONS:
1. To prevent electrical shock, disconnect power supply before servicing.
2. Do not touch lens, guard or enclosures. Allow fixture to cool down before
servicing.
3. Do not operate fixture with missing or damaged parts.
Installation
1. To prevent electrical shock,disconnect power supply before installation.
2. Remove 2 nuts that on lamp base and take away the metal shelf.
3. Loosen ground wire screw that on metal shelf.
4. Fix metal shelf on wall with 2 screws in accessories bag.
5. Circle ground wire on its screw and tighten them.
6. Connect wires according to color code (White on White, Black on Black,
Ground on Ground).
7. Fix lamp base with 2 nuts.
8. Reconnect power supply.
LAMP INSTALLATION / REPLACEMENT:
Non-replaceable LED.
Page 2
Loading...