Page 1
Label Picture Description QTY
A Metal Leg 2
B Connection Board 1
Caution : You must read this before you proceed
Computer Table
Dear Customer: Thank You for purchasing one of our products, We hope you
will enjoy it. Please be aware this Product may require 60 Minutes to assemble.
Please carefully read through the instructions below.
Attention: Do not fully tighten the screws before all screws are in place.
General Care: Keep your furniture out of direct sunlight. Use desk pads and
coasters to protect the surface from dents, scatches, and moisture condensation
from hot or cold liquids.
Cleaning: For cleaning, wipe the surface with damp (not wet) cloth or wipe dry
with a clean lint free cotton cloth.
Page 1 of 16
Page 2
C
Cabinet Bottom
Panel
1
D Cabinet Left Panel 1
E Cabinet Mid-Panel 1
F
Cabinet Right
Panel
1
G Table Board 1
H
Cabinet Back
Panel
1
I Top Shelf Panel 1
TOP
Page 2 of 16
Page 3
J
Left Front Drawer
Panel
1
K
Right Front
Drawer Panel
1
L Drawer Left Panel 2
M
Drawer Right
Panel
2
N
Back Drawer
Panel
2
O
Drawer Bottom
Panel
2
P-1L Left Drawer Rail 2
Page 3 of 16
Page 4
P-1R Right Drawer Rail 2
P-2L Left Drawer Rail 2
P-2R Right Drawer Rail 2
Label Picture Description QTY
①
Adjustable Glider
Foot
4
②
Screw
(M5x80mm)
4
③
Bolt (M6x30mm) 4
④
Wooden Dowel 4
⑤
Cam Bolt & Cam
Lock
31
⑥
Screw
(M3.5x14mm)
16
⑦
Screw
(M5x40mm)
8
⑧
Screwdriver 1
Page 4 of 16
Page 5
TOP
X4
X4X4X4
X31
X16
X8
X1
Page 5 of 16
Page 6
Step 1
Overview
This Computer Table has multiple parts and may require up to 60 minutes to
assemble. To give you an overview of the Computer Table parts, the above
picture is to help you put the various parts into perspective. Please read through
the instructions below to familiarise yourself with the parts and steps before
assembly.
Attach Drawer Left Panel(L) and Drawer Right Panel(M) to Drawer Back
Panel(N) using Screws(⑦) with Screwdriver (⑧).
Right Front
Drawer Panel (K)
Left Front
Drawer Panel
(J)
Top Shelf Panel (I)
⑧
Page 6 of 16
Page 7
Step 2
Step 3
Step 4
Slide / Insert the Drawer Bottom Panel(O) into the grooves of the attached
Drawer Frame.
1. Attach Cam Bolts(⑤) to Right Front Drawer Panel(K) with Screwdriver(⑧).
2. Insert Cam Locks(⑤) into the Drawer Left Panel(L) and Drawer Right
Panel(M).
3. Attach the Left Front Drawer Panel(K) to Drawer Frame （M/L) by turning the
Cam Locks with the Screwdriver(⑧) until they all lock into place.
M
N
L
labelled" + -"
⑧
⑤
L
N
M
L
N
M
⑧
k
Page 7 of 16
Page 8
Step 5
Step 6
Step 7
Turn the assembled Drawer over.
Attach Rail(P-2L) to Drawer Left Panel(L), and Rail(P-2R) to Drawer Right
Panel(M) using Screws(⑥) with Screwdriver(⑧).
Note: The correct mounting positions are indicated with white marker.
Repeat Steps 1 to 4 to assemble the Left Side Drawer.
Upon completion of assembly of both Drawers, put aside.
Screw-in four Adjustable Glider Feet(①) into the bottom of the two Metal Legs(A)
by hand.
Attach the Connection Board(B) between Metal Legs(A) using Screws(②) with
Screwdriver(⑧).
②
⑧
⑧
A
Page 8 of 16
Page 9
Step 8
Step 9
With assistance from your adult partners, attach the assembled Metal Legs(A) to
Cabinet Bottom Panel(C) using four Bolts(③) with Screwdriver(⑧).
Insert four Wooden Dowels(④) into Cabinet Bottom Panel(E) as shown above.
Insert Cam Locks(⑤) into the mounting positions on Cabinet Bottom Panel(E) as
shown in the picture.
Note: Ensure the arrow labelled "+ -" on the Cam Lock head points
towards the Cam Bolt mounting positions.
④
labelled" + -"Upwards
labelled" + -"Downwards
⑤
Cam Bolt mounting position
Cam Bolt mounting position
Page 9 of 16
Page 10
Step 10
Step 11
Carefully, turn and stand the desk, right side up.
Insert Cam Locks and Cam Bolts(⑤) at the preset positions as shown in the
picture on Cabinet Bottom Panel(C).
Note: Ensure the arrow which labelled "- +" on the Cam Lock head points
towards Cam Bolt mounting positions.
Attach Cabinet Mid-Panel(E) to the Cabinet Bottom Panel(C) by inserting Cam
Bolt(⑤) and Wooden Dowel(④) into the mounting positions on the Cabinet
Bottom Panel(C)..
Then attach the Panels by turning the Cam Locks(⑤) with the Screwdriver(⑧)
until they all lock into place.
Cam Bolt
mounting
position
⑧
Page 10 of 16
Page 11
Step 12
Step 13
Step 14
Attach the Left Rail(P-1L) and Right Rail(P-1R) to Cabinet Mid-Panel(E) using
Screws(⑥) with Screwdriver(⑧).
Insert Cam Locks(⑤) into the mounting positions of Cabinet Back Panel(H) and
Top Shelf Panel(I) as shown in the above picture.
Attach Cam Bolts(⑤) to Cabinet Back Panel(H) and Top Shelf Panel(I)
using Screwdriver(⑧).
P-1R
P-1L
⑧
⑧
⑧
E
Page 11 of 16
Page 12
Step 15
Step 16
Connect Cabinet Back Panel(H) to Top Shelf Panel(I) using Cam Bolt & Cam
Lock(⑤) with Screwdriver(⑧).
Attach assembled Cabinet Back Panel(H) and Top Shelf Panel(I) to Cabinet
Bottom Panel(C) by inserting Cam Bolts(⑤) into the mounting position of
Cabinet Bottom Panel(C).
Then turn the Cam Locks(⑤) with the Screwdriver(⑧) until they all lock into
place.
Insert Cam Locks & Cam Bolts(⑤) into mounting positions of Table Board(G) as
shown in the picture.
Note: Ensure the arrow which labelled "- +" on the Cam Lock head points
towards Cam Bolt mounting positions.
⑧
G
Page 12 of 16
Page 13
Step 17
Step 18
Step 19
Insert Cam Bolt(⑤) into Cabinet Mid-Panel(E) with Screwdriver(⑧).
Attach Table Board(G) to Cabinet Mid-Panel(E) by turning the Cam Locks(⑤)
with the Screwdriver(⑧) until they all lock into place.
Attach Left Rail(P-2L) to Cabinet Left Panel(D) using Screws(⑥) with
Screwdriver(⑧).
Attach Right Rail(P-2R) to Cabinet Right Panel(F) using Screws(⑥) with
Screwdriver(⑧).
Insert Cam Bolts(⑤) into Cabinet Left Panel(D) and Cabinet Right Panel(F) with
Screwdriver (⑧).
P-2L
P-2R
⑧
⑧
⑧
H
E
D
F
Page 13 of 16
Page 14
Step 20
Step 21
Insert Cabinet Left Panel(D) into Top Shelf Panel(I), Table Board(G), Cabinet
Back Panel(H) and Cabinet Bottom Panel(C).
Then turn the Cam Locks(⑤) with the Screwdriver(⑧) until they all lock into
place.
Insert Cabinet Right Panel(F) into Top Shelf Panel(I), Table Board(G), Cabinet
Back Panel(H) and Cabinet Bottom Panel(C).
Then turn the Cam Locks(⑤) with the Screwdriver(⑧) until they all lock into
place.
I
G
H
C
⑧
I
GCH
Page 14 of 16
Page 15
Step 22
Insert pre-assembled Drawers into the Desk.
Your Computer Table is ready for use.
Note: As the two front Drawer Panels are different sizes make sure to put
them into the correct positions as shown in the picture.
This Computer Table can only be used on a flat, level surface.
Page 15 of 16
Page 16
What is Proposition 65?
Proposition 65 is a California law that requires warning labels on products that may contain one of
more than 800-plus chemicals or ingredients that the California Office of Environmental Health Hazard
Assessment (OEHHA) has deemed to cause cancer or other reproductive toxicity. Chemicals and
elements on this list include wood dust, brass, and other everyday substances, which can be found in
very common household items, such as: lamps, tableware, jewelry, crystal glasses, electric cords,
beauty products, automobiles, and furniture.
Why Did I Find a Proposition 65 Warning on My Home Goods Product?
We include Proposition 65 warnings on all of our products because there is always a chance that one
of the 800-plus common chemicals and ingredients listed under this law could potentially be on our
furniture or packing materials. We risk large fines under this law, if we don't include this warning.
Should I worry?
We realize you may be worried finding this warning on our products, but we want to reassure you that
the hazardous exposure limits for any of these chemicals have never been found on furniture products
that we’ve shipped to our customers. Additionally, this warning label is very common and can be
found on almost every piece of furniture sold in the state of California.
Just How Common Are Proposition 65 Warnings?
Proposition 65 warnings have become so common in California that it is hard to take a trip to a local
bank, grocery store, or restaurant without finding at least one warning. In fact, even the Disney Land
Resort has a Proposition 65 warning:
Do not clean furniture with harsh cleansers or polish.
Do not put hot items directly on furniture surface
Do not write on furniture without a padded barrier to protect the surface.
Do not place furniture outside . For indoor use only .
Do not place furniture near heating or cooling vents.
Do not place furniture under direct sunlight.
Not for commercial use. For residential use only .
Children should not climb or jump on the furniture.
Stains may be removed with mild soap solution and damp cloth.
Dust and pick-up spills using a clean, non-colored, lint-free cloth .
Page 16 of 16
Loading...